diff mbox series

[06/10] media: vivid: don't set HDMI TX controls if there are no HDMI outputs

Message ID 20240624095300.745567-7-anonolitunya@gmail.com (mailing list archive)
State New
Headers show
Series Add loopback support across multiple vivid instances | expand

Commit Message

Dorcas Anono Litunya June 24, 2024, 9:52 a.m. UTC 
From: Hans Verkuil <hverkuil-cisco@xs4all.nl>

When setting the EDID it would attempt to update two controls
that are only present if there is an HDMI output configured.

If there isn't any (e.g. when the vivid module is loaded with
node_types=1), then calling VIDIOC_S_EDID would crash.

Fix this by first checking if outputs are present.

Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
---
 drivers/media/test-drivers/vivid/vivid-vid-cap.c | 12 ++++++++----
 1 file changed, 8 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/media/test-drivers/vivid/vivid-vid-cap.c b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
index 2804975fe278..de4cb85e397f 100644
--- a/drivers/media/test-drivers/vivid/vivid-vid-cap.c
+++ b/drivers/media/test-drivers/vivid/vivid-vid-cap.c
@@ -1553,8 +1553,10 @@  int vidioc_s_edid(struct file *file, void *_fh,
 		return -EINVAL;
 	if (edid->blocks == 0) {
 		dev->edid_blocks = 0;
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
-		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
+		if (dev->num_outputs) {
+			v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, 0);
+			v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, 0);
+		}
 		phys_addr = CEC_PHYS_ADDR_INVALID;
 		goto set_phys_addr;
 	}
@@ -1578,8 +1580,10 @@  int vidioc_s_edid(struct file *file, void *_fh,
 			display_present |=
 				dev->display_present[i] << j++;
 
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
-	v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+	if (dev->num_outputs) {
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_edid_present, display_present);
+		v4l2_ctrl_s_ctrl(dev->ctrl_tx_hotplug, display_present);
+	}
 
 set_phys_addr:
 	/* TODO: a proper hotplug detect cycle should be emulated here */