From patchwork Tue Jul 9 13:28:59 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Dan Scally X-Patchwork-Id: 13728013 Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 91B0515EFC8; Tue, 9 Jul 2024 13:29:39 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=213.167.242.64 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720531781; cv=none; b=RXwxfL50nozD1xB9Ms+t61fkn6/ieiM1Njp4Qq39jHRTRWZ+CkX+L3rYYqIoD8c0gxweHymGFZfUSdVMGp2INGYaEYbcK+Y1ERFsdoRz1D75yUXyRJ8i2HKarFQPrf1mPwKTCYc4FCdYsS8F/Oee3d3RxpY3E8/zOwOIjd0ghBQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1720531781; c=relaxed/simple; bh=TcZ/cv2M1fCZCQOfuP7gKUZ8s1RWE6N1BmgjIX1mllg=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=H1KRkNA+Ob7u3piKy1x04JMnLdOguHaPtKqQEYMUPHE7Kqa+lWbX800F5dApbdsH/Bo4c3UIcR3Jb32AUeOK0J8lSbkRHmYyeAeei0dMElCNUSblMgu+0rXyUL0oMNK7QECpS2lj2QxjkdFaCwYZUPXEX8yEsETSCg2Qfp3HAcI= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ideasonboard.com; spf=pass smtp.mailfrom=ideasonboard.com; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b=IssAJlta; arc=none smtp.client-ip=213.167.242.64 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ideasonboard.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (1024-bit key) header.d=ideasonboard.com header.i=@ideasonboard.com header.b="IssAJlta" Received: from mail.ideasonboard.com (cpc141996-chfd3-2-0-cust928.12-3.cable.virginm.net [86.13.91.161]) by perceval.ideasonboard.com (Postfix) with ESMTPSA id 2A94B23CC; Tue, 9 Jul 2024 15:28:51 +0200 (CEST) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=ideasonboard.com; s=mail; t=1720531731; bh=TcZ/cv2M1fCZCQOfuP7gKUZ8s1RWE6N1BmgjIX1mllg=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=IssAJltaiQMq452wwxA18rVmHTbeWoRsgk8uO1hF3gvhS+Qfv60YWU/1UzI4hSSyb vYlumKPnDh959xwg0Eunfm5iEkTVhMn/M9q/hVbtYgJcj7fLrmXwQG3MC5cifeSzvP 7k0K/pUgDZnYA58sBq7ELp4fZGUYnSzSQiTN1W/k= From: Daniel Scally To: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: jacopo.mondi@ideasonboard.com, nayden.kanchev@arm.com, robh+dt@kernel.org, mchehab@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, jerome.forissier@linaro.org, kieran.bingham@ideasonboard.com, laurent.pinchart@ideasonboard.com, sakari.ailus@iki.fi, Daniel Scally Subject: [PATCH v6 11/18] media: uapi: Add 3a stats buffer for mali-c55 Date: Tue, 9 Jul 2024 14:28:59 +0100 Message-Id: <20240709132906.3198927-12-dan.scally@ideasonboard.com> X-Mailer: git-send-email 2.34.1 In-Reply-To: <20240709132906.3198927-1-dan.scally@ideasonboard.com> References: <20240709132906.3198927-1-dan.scally@ideasonboard.com> Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Add a header that describes the format of the 3A statistics buffers for the mali-c55 ISP. Reviewed-by: Laurent Pinchart Acked-by: Nayden Kanchev Co-developed-by: Jacopo Mondi Signed-off-by: Jacopo Mondi Signed-off-by: Daniel Scally --- Changes in v6: - New patch Changes in v5: - New patch MAINTAINERS | 1 + .../uapi/linux/media/arm/mali-c55-config.h | 182 ++++++++++++++++++ 2 files changed, 183 insertions(+) create mode 100644 include/uapi/linux/media/arm/mali-c55-config.h diff --git a/MAINTAINERS b/MAINTAINERS index 04726aaaefd4..3b5c39b820cc 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1765,6 +1765,7 @@ F: Documentation/admin-guide/media/mali-c55-graph.dot F: Documentation/admin-guide/media/mali-c55.rst F: Documentation/devicetree/bindings/media/arm,mali-c55.yaml F: drivers/media/platform/arm/mali-c55/ +F: include/uapi/linux/media/arm/mali-c55-config.h ARM MALI-DP DRM DRIVER M: Liviu Dudau diff --git a/include/uapi/linux/media/arm/mali-c55-config.h b/include/uapi/linux/media/arm/mali-c55-config.h new file mode 100644 index 000000000000..21b453bdee5d --- /dev/null +++ b/include/uapi/linux/media/arm/mali-c55-config.h @@ -0,0 +1,182 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* + * ARM Mali-C55 ISP Driver - Userspace API + * + * Copyright (C) 2023 Ideas on Board Oy + */ + +#ifndef __UAPI_MALI_C55_CONFIG_H +#define __UAPI_MALI_C55_CONFIG_H + +#include + +/* + * Frames are split into zones of almost equal width and height - a zone is a + * rectangular tile of a frame. The metering blocks within the ISP collect + * aggregated statistics per zone. A maximum of 15x15 zones can be configured, + * and so the statistics buffer within the hardware is sized to accommodate + * that. + * + * The utilised number of zones is runtime configurable. + */ +#define MALI_C55_MAX_ZONES (15 * 15) + +/** + * struct mali_c55_ae_1024bin_hist - Auto Exposure 1024-bin histogram statistics + * + * @bins: 1024 element array of 16-bit pixel counts. + * + * The 1024-bin histogram module collects image-global but zone-weighted + * intensity distributions of pixels in fixed-width bins. The modules can be + * configured into different "plane modes" which affect the contents of the + * collected statistics. In plane mode 0, pixel intensities are taken regardless + * of colour plane into a single 1024-bin histogram with a bin width of 4. In + * plane mode 1, four 256-bin histograms with a bin width of 16 are collected - + * one for each CFA colour plane. In plane modes 4, 5, 6 and 7 two 512-bin + * histograms with a bin width of 8 are collected - in each mode one of the + * colour planes is collected into the first histogram and all the others are + * combined into the second. The histograms are stored consecutively in the bins + * array. + * + * The 16-bit pixel counts are stored as a 4-bit exponent in the most + * significant bits followed by a 12-bit mantissa. Conversion to a usable + * format can be done according to the following pseudo-code:: + * + * if (e == 0) { + * bin = m * 2; + * } else { + * bin = (m + 4096) * 2^e + * } + * + * where + * e is the exponent value in range 0..15 + * m is the mantissa value in range 0..4095 + * + * The pixels used in calculating the statistics can be masked using three + * methods: + * + * 1. Pixels can be skipped in X and Y directions independently. + * 2. Minimum/Maximum intensities can be configured + * 3. Zones can be differentially weighted, including 0 weighted to mask them + * + * The data for this histogram can be collected from different tap points in the + * ISP depending on configuration - after the white balance or digital gain + * blocks, or immediately after the input crossbar. + */ +struct mali_c55_ae_1024bin_hist { + __u16 bins[1024]; +} __attribute__((packed)); + +/** + * struct mali_c55_ae_5bin_hist - Auto Exposure 5-bin histogram statistics + * + * @hist0: 16-bit normalised pixel count for the 0th intensity bin + * @hist1: 16-bit normalised pixel count for the 1st intensity bin + * @hist3: 16-bit normalised pixel count for the 3rd intensity bin + * @hist4: 16-bit normalised pixel count for the 4th intensity bin + * + * The ISP generates a 5-bin histogram of normalised pixel counts within bins of + * pixel intensity for each of 225 possible zones within a frame. The centre bin + * of the histogram for each zone is not available from the hardware and must be + * calculated by subtracting the values of hist0, hist1, hist3 and hist4 from + * 0xffff as in the following equation: + * + * hist2 = 0xffff - (hist0 + hist1 + hist3 + hist4) + */ +struct mali_c55_ae_5bin_hist { + __u16 hist0; + __u16 hist1; + __u16 hist3; + __u16 hist4; +} __attribute__((packed)); + +/** + * struct mali_c55_awb_average_ratios - Auto White Balance colour ratios + * + * @avg_rg_gr: Average R/G or G/R ratio in Q4.8 format. + * @avg_bg_br: Average B/G or B/R ratio in Q4.8 format. + * @num_pixels: The number of pixels used in the AWB calculation + * + * The ISP calculates and collects average colour ratios for each zone in an + * image and stores them in Q4.8 format (the lowest 8 bits are fractional, with + * bits [11:8] representing the integer). The exact ratios collected (either + * R/G, B/G or G/R, B/R) are configurable through the parameters buffer. The + * value of the 4 high bits is undefined. + */ +struct mali_c55_awb_average_ratios { + __u16 avg_rg_gr; + __u16 avg_bg_br; + __u32 num_pixels; +} __attribute__((packed)); + +/** + * struct mali_c55_af_statistics - Auto Focus edge and intensity statistics + * + * @intensity_stats: Packed mantissa and exponent value for pixel intensity + * @edge_stats: Packed mantissa and exponent values for edge intensity + * + * The ISP collects the squared sum of pixel intensities for each zone within a + * configurable Region of Interest on the frame. Additionally, the same data are + * collected after being passed through a bandpass filter which removes high and + * low frequency components - these are referred to as the edge statistics. + * + * The intensity and edge statistics for a zone can be used to calculate the + * contrast information for a zone + * + * C = E2 / I2 + * + * Where I2 is the intensity statistic for a zone and E2 is the edge statistic + * for that zone. Optimum focus is reached when C is at its maximum. + * + * The intensity and edge statistics are stored packed into a non-standard 16 + * bit floating point format, where the 7 most significant bits represent the + * exponent and the 9 least significant bits the mantissa. This format can be + * unpacked with the following pseudocode:: + * + * if (e == 0) { + * x = m; + * } else { + * x = 2^e-1 * (m + 2^9) + * } + * + * where + * e is the exponent value in range 0..127 + * m is the mantissa value in range 0..511 + */ +struct mali_c55_af_statistics { + __u16 intensity_stats; + __u16 edge_stats; +} __attribute__((packed)); + +/** + * struct mali_c55_stats_buffer - 3A statistics for the mali-c55 ISP + * + * @ae_1024bin_hist: 1024-bin frame-global pixel intensity histogram + * @iridix_1024bin_hist: Post-Iridix block 1024-bin histogram + * @ae_5bin_hists: 5-bin pixel intensity histograms for AEC + * @reserved1: Undefined buffer space + * @awb_ratios: Color balance ratios for Auto White Balance + * @reserved2: Undefined buffer space + * @af_statistics: Pixel intensity statistics for Auto Focus + * @reserved3: Undefined buffer space + * + * This struct describes the metering statistics space in the Mali-C55 ISP's + * hardware in its entirety. The space between each defined area is marked as + * "unknown" and may not be 0, but should not be used. The @ae_5bin_hists, + * @awb_ratios and @af_statistics members are arrays of statistics per-zone. + * The zones are arranged in the array in raster order starting from the top + * left corner of the image. + */ + +struct mali_c55_stats_buffer { + struct mali_c55_ae_1024bin_hist ae_1024bin_hist; + struct mali_c55_ae_1024bin_hist iridix_1024bin_hist; + struct mali_c55_ae_5bin_hist ae_5bin_hists[MALI_C55_MAX_ZONES]; + __u32 reserved1[14]; + struct mali_c55_awb_average_ratios awb_ratios[MALI_C55_MAX_ZONES]; + __u32 reserved2[14]; + struct mali_c55_af_statistics af_statistics[MALI_C55_MAX_ZONES]; + __u32 reserved3[15]; +} __attribute__((packed)); + +#endif /* __UAPI_MALI_C55_CONFIG_H */