[v4,2/4] dt-bindings: media: Add bindings for raspberrypi,rp1-cfe

Commit Message

Tomi Valkeinen Sept. 4, 2024, 11:19 a.m. UTC

Add DT bindings for raspberrypi,rp1-cfe.

Reviewed-by: Krzysztof Kozlowski <[e-mail]>
Signed-off-by: Tomi Valkeinen <[e-mail]>
---
 .../bindings/media/raspberrypi,rp1-cfe.yaml        | 93 ++++++++++++++++++++++
 1 file changed, 93 insertions(+)

Patch

diff --git a/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
new file mode 100644
index 000000000000..eba5394719b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/raspberrypi,rp1-cfe.yaml
@@ -0,0 +1,93 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/raspberrypi,rp1-cfe.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi PiSP Camera Front End
+
+maintainers:
+  - Tomi Valkeinen <[e-mail]>
+  - Raspberry Pi Kernel Maintenance <[e-mail]>
+
+description: |
+  The Raspberry Pi PiSP Camera Front End is a module in Raspberrypi 5's RP1 I/O
+  controller, that contains:
+  - MIPI D-PHY
+  - MIPI CSI-2 receiver
+  - Simple image processor (called PiSP Front End, or FE)
+
+  The FE documentation is available at:
+  https://datasheets.raspberrypi.com/camera/raspberry-pi-image-signal-processor-specification.pdf
+
+  The PHY and CSI-2 receiver part have no public documentation.
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,rp1-cfe
+
+  reg:
+    items:
+      - description: CSI-2 registers
+      - description: D-PHY registers
+      - description: MIPI CFG (a simple top-level mux) registers
+      - description: FE registers
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+    description: CSI-2 RX Port
+
+    properties:
+      endpoint:
+        $ref: video-interfaces.yaml#
+        unevaluatedProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 4
+
+        required:
+          - data-lanes
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    rp1 {
+      #address-cells = <2>;
+      #size-cells = <2>;
+
+      csi@110000 {
+        compatible = "raspberrypi,rp1-cfe";
+        reg = <0xc0 0x40110000 0x0 0x100>,
+              <0xc0 0x40114000 0x0 0x100>,
+              <0xc0 0x40120000 0x0 0x100>,
+              <0xc0 0x40124000 0x0 0x1000>;
+
+        interrupts = <42>;
+
+        clocks = <&rp1_clocks>;
+
+        port {
+          csi_ep: endpoint {
+            remote-endpoint = <&cam_endpoint>;
+            data-lanes = <1 2>;
+          };
+        };
+      };
+    };