Message ID | 20241014173840.412695-1-tomm.merciai@gmail.com (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | media: i2c: ov5645: add HAS_EVENTS support | expand |
Hi Tommaso, Thank you for the patch. On Mon, Oct 14, 2024 at 07:38:40PM +0200, Tommaso Merciai wrote: > Controls can be exposed to userspace via a v4l-subdevX device, and > userspace has to be able to subscribe to control events so that it is > notified when the control changes value. > Add missing HAS_EVENTS support: flag and .(un)subscribe_event(). > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > --- > drivers/media/i2c/ov5645.c | 10 +++++++++- > 1 file changed, 9 insertions(+), 1 deletion(-) > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > index 0c32bd2940ec..2c5145d5c616 100644 > --- a/drivers/media/i2c/ov5645.c > +++ b/drivers/media/i2c/ov5645.c > @@ -29,6 +29,7 @@ > #include <linux/slab.h> > #include <linux/types.h> > #include <media/v4l2-ctrls.h> > +#include <media/v4l2-event.h> > #include <media/v4l2-fwnode.h> > #include <media/v4l2-subdev.h> > > @@ -1034,6 +1035,11 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = { > .s_stream = ov5645_s_stream, > }; > > +static const struct v4l2_subdev_core_ops ov5645_subdev_core_ops = { > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > +}; > + > static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > .enum_mbus_code = ov5645_enum_mbus_code, > .enum_frame_size = ov5645_enum_frame_size, > @@ -1043,6 +1049,7 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > }; > > static const struct v4l2_subdev_ops ov5645_subdev_ops = { > + .core = &ov5645_subdev_core_ops, > .video = &ov5645_video_ops, > .pad = &ov5645_subdev_pad_ops, > }; > @@ -1178,7 +1185,8 @@ static int ov5645_probe(struct i2c_client *client) > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > ov5645->sd.internal_ops = &ov5645_internal_ops; > - ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | > + V4L2_SUBDEV_FL_HAS_EVENTS; Instead of patching every subdev driver, should we handle all of this in the subdev core ? If a control handler is set for the subdev, we could set the HAS_EVENTS flag automatically, and default to v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() if there are no control operations. > ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > ov5645->sd.dev = &client->dev; > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
Hi Laurent, Thanks for your review. On Mon, Oct 14, 2024 at 08:54:52PM +0300, Laurent Pinchart wrote: > Hi Tommaso, > > Thank you for the patch. > > On Mon, Oct 14, 2024 at 07:38:40PM +0200, Tommaso Merciai wrote: > > Controls can be exposed to userspace via a v4l-subdevX device, and > > userspace has to be able to subscribe to control events so that it is > > notified when the control changes value. > > Add missing HAS_EVENTS support: flag and .(un)subscribe_event(). > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > --- > > drivers/media/i2c/ov5645.c | 10 +++++++++- > > 1 file changed, 9 insertions(+), 1 deletion(-) > > > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > > index 0c32bd2940ec..2c5145d5c616 100644 > > --- a/drivers/media/i2c/ov5645.c > > +++ b/drivers/media/i2c/ov5645.c > > @@ -29,6 +29,7 @@ > > #include <linux/slab.h> > > #include <linux/types.h> > > #include <media/v4l2-ctrls.h> > > +#include <media/v4l2-event.h> > > #include <media/v4l2-fwnode.h> > > #include <media/v4l2-subdev.h> > > > > @@ -1034,6 +1035,11 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = { > > .s_stream = ov5645_s_stream, > > }; > > > > +static const struct v4l2_subdev_core_ops ov5645_subdev_core_ops = { > > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > > +}; > > + > > static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > .enum_mbus_code = ov5645_enum_mbus_code, > > .enum_frame_size = ov5645_enum_frame_size, > > @@ -1043,6 +1049,7 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > }; > > > > static const struct v4l2_subdev_ops ov5645_subdev_ops = { > > + .core = &ov5645_subdev_core_ops, > > .video = &ov5645_video_ops, > > .pad = &ov5645_subdev_pad_ops, > > }; > > @@ -1178,7 +1185,8 @@ static int ov5645_probe(struct i2c_client *client) > > > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > > ov5645->sd.internal_ops = &ov5645_internal_ops; > > - ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | > > + V4L2_SUBDEV_FL_HAS_EVENTS; > > Instead of patching every subdev driver, should we handle all of this in > the subdev core ? If a control handler is set for the subdev, we could > set the HAS_EVENTS flag automatically, and default to > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > if there are no control operations. Well :) Not every subdev drivers, but only the ones I'm testing. Yesterday I was playing with ov5645 :) And I got: v4l2-compliance -d /dev/v4l-subdev1 test VIDIOC_G/S/TRY_EXT_CTRLS: OK fail: v4l2-test-controls.cpp(1108): subscribe event for control 'User Controls' failed Joke apart fully agree and thanks for your hint! I will take a look :) > > > ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > > ov5645->sd.dev = &client->dev; > > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > -- > Regards, > > Laurent Pinchart Thanks & Regards, Tommaso
Hi Laurent, Back on the topic. On Tue, Oct 15, 2024 at 08:16:13AM +0200, Tommaso Merciai wrote: > Hi Laurent, > Thanks for your review. > > On Mon, Oct 14, 2024 at 08:54:52PM +0300, Laurent Pinchart wrote: > > Hi Tommaso, > > > > Thank you for the patch. > > > > On Mon, Oct 14, 2024 at 07:38:40PM +0200, Tommaso Merciai wrote: > > > Controls can be exposed to userspace via a v4l-subdevX device, and > > > userspace has to be able to subscribe to control events so that it is > > > notified when the control changes value. > > > Add missing HAS_EVENTS support: flag and .(un)subscribe_event(). > > > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > > --- > > > drivers/media/i2c/ov5645.c | 10 +++++++++- > > > 1 file changed, 9 insertions(+), 1 deletion(-) > > > > > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > > > index 0c32bd2940ec..2c5145d5c616 100644 > > > --- a/drivers/media/i2c/ov5645.c > > > +++ b/drivers/media/i2c/ov5645.c > > > @@ -29,6 +29,7 @@ > > > #include <linux/slab.h> > > > #include <linux/types.h> > > > #include <media/v4l2-ctrls.h> > > > +#include <media/v4l2-event.h> > > > #include <media/v4l2-fwnode.h> > > > #include <media/v4l2-subdev.h> > > > > > > @@ -1034,6 +1035,11 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = { > > > .s_stream = ov5645_s_stream, > > > }; > > > > > > +static const struct v4l2_subdev_core_ops ov5645_subdev_core_ops = { > > > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > > > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > > > +}; > > > + > > > static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > > .enum_mbus_code = ov5645_enum_mbus_code, > > > .enum_frame_size = ov5645_enum_frame_size, > > > @@ -1043,6 +1049,7 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > > }; > > > > > > static const struct v4l2_subdev_ops ov5645_subdev_ops = { > > > + .core = &ov5645_subdev_core_ops, > > > .video = &ov5645_video_ops, > > > .pad = &ov5645_subdev_pad_ops, > > > }; > > > @@ -1178,7 +1185,8 @@ static int ov5645_probe(struct i2c_client *client) > > > > > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > > > ov5645->sd.internal_ops = &ov5645_internal_ops; > > > - ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > > + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | > > > + V4L2_SUBDEV_FL_HAS_EVENTS; > > > > Instead of patching every subdev driver, should we handle all of this in > > the subdev core ? If a control handler is set for the subdev, we could > > set the HAS_EVENTS flag automatically, and default to > > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > > if there are no control operations. Premit: - Don't know if I'm wrong eh. This can be done into: __v4l2_subdev_init_finalize() Adding: if (sd->ctrl_handler) sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; And check if there are no control operations using: bool has_subscribe_event; bool has_unsubscribe_event; has_subscribe_event = v4l2_subdev_has_op(sd, core, subscribe_event); has_unsubscribe_event = v4l2_subdev_has_op(sd, core, unsubscribe_event); if (!has_subscribe_event) assign v4l2_ctrl_subdev_subscribe_event as default .subscribe ops(somehow) if (!has_unsubscribe_event) assign v4l2_event_subdev_unsubscribe as default .unsubscribe ops (somehow) Or maybe v4l2_subdev_init_finalize() it's too late? I'm completely wrong? What do you think? Thanks in advance, Tommaso > > Well :) > Not every subdev drivers, but only the ones I'm testing. > > Yesterday I was playing with ov5645 :) And I got: > > v4l2-compliance -d /dev/v4l-subdev1 > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > fail: v4l2-test-controls.cpp(1108): subscribe event for control 'User Controls' failed > > Joke apart fully agree and thanks for your hint! > I will take a look :) > > > > > > ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > > > ov5645->sd.dev = &client->dev; > > > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; > > > > -- > > Regards, > > > > Laurent Pinchart > > Thanks & Regards, > Tommaso
Hi Tommaso, On Tue, Oct 15, 2024 at 06:37:58PM +0200, Tommaso Merciai wrote: > On Tue, Oct 15, 2024 at 08:16:13AM +0200, Tommaso Merciai wrote: > > On Mon, Oct 14, 2024 at 08:54:52PM +0300, Laurent Pinchart wrote: > > > On Mon, Oct 14, 2024 at 07:38:40PM +0200, Tommaso Merciai wrote: > > > > Controls can be exposed to userspace via a v4l-subdevX device, and > > > > userspace has to be able to subscribe to control events so that it is > > > > notified when the control changes value. > > > > Add missing HAS_EVENTS support: flag and .(un)subscribe_event(). > > > > > > > > Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> > > > > --- > > > > drivers/media/i2c/ov5645.c | 10 +++++++++- > > > > 1 file changed, 9 insertions(+), 1 deletion(-) > > > > > > > > diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c > > > > index 0c32bd2940ec..2c5145d5c616 100644 > > > > --- a/drivers/media/i2c/ov5645.c > > > > +++ b/drivers/media/i2c/ov5645.c > > > > @@ -29,6 +29,7 @@ > > > > #include <linux/slab.h> > > > > #include <linux/types.h> > > > > #include <media/v4l2-ctrls.h> > > > > +#include <media/v4l2-event.h> > > > > #include <media/v4l2-fwnode.h> > > > > #include <media/v4l2-subdev.h> > > > > > > > > @@ -1034,6 +1035,11 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = { > > > > .s_stream = ov5645_s_stream, > > > > }; > > > > > > > > +static const struct v4l2_subdev_core_ops ov5645_subdev_core_ops = { > > > > + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, > > > > + .unsubscribe_event = v4l2_event_subdev_unsubscribe, > > > > +}; > > > > + > > > > static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > > > .enum_mbus_code = ov5645_enum_mbus_code, > > > > .enum_frame_size = ov5645_enum_frame_size, > > > > @@ -1043,6 +1049,7 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { > > > > }; > > > > > > > > static const struct v4l2_subdev_ops ov5645_subdev_ops = { > > > > + .core = &ov5645_subdev_core_ops, > > > > .video = &ov5645_video_ops, > > > > .pad = &ov5645_subdev_pad_ops, > > > > }; > > > > @@ -1178,7 +1185,8 @@ static int ov5645_probe(struct i2c_client *client) > > > > > > > > v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); > > > > ov5645->sd.internal_ops = &ov5645_internal_ops; > > > > - ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; > > > > + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | > > > > + V4L2_SUBDEV_FL_HAS_EVENTS; > > > > > > Instead of patching every subdev driver, should we handle all of this in > > > the subdev core ? If a control handler is set for the subdev, we could > > > set the HAS_EVENTS flag automatically, and default to > > > v4l2_ctrl_subdev_subscribe_event() and v4l2_event_subdev_unsubscribe() > > > if there are no control operations. > > Premit: > - Don't know if I'm wrong eh. Nobody knows :-) > This can be done into: > > __v4l2_subdev_init_finalize() > > Adding: > > if (sd->ctrl_handler) > sd->flags |= V4L2_SUBDEV_FL_HAS_EVENTS; > > And check if there are no control operations using: > > bool has_subscribe_event; > bool has_unsubscribe_event; > > > has_subscribe_event = v4l2_subdev_has_op(sd, core, subscribe_event); > has_unsubscribe_event = v4l2_subdev_has_op(sd, core, unsubscribe_event); > > if (!has_subscribe_event) > assign v4l2_ctrl_subdev_subscribe_event as default .subscribe ops(somehow) We can't change the ops structure as it's constant. Something like this could do: diff --git a/drivers/media/v4l2-core/v4l2-subdev.c b/drivers/media/v4l2-core/v4l2-subdev.c index 3a4ba08810d2..41ae18a0d41e 100644 --- a/drivers/media/v4l2-core/v4l2-subdev.c +++ b/drivers/media/v4l2-core/v4l2-subdev.c @@ -691,10 +691,24 @@ static long subdev_do_ioctl(struct file *file, unsigned int cmd, void *arg, return v4l2_event_dequeue(vfh, arg, file->f_flags & O_NONBLOCK); case VIDIOC_SUBSCRIBE_EVENT: - return v4l2_subdev_call(sd, core, subscribe_event, vfh, arg); + if (v4l2_subdev_has_op(sd, core, subscribe_event)) + return v4l2_subdev_call(sd, core, subscribe_event, vfh, + arg); + else if ((sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS) && + vfh->ctrl_handler) + return v4l2_ctrl_subdev_subscribe_event(sd, vfh, arg); + else + return -ENOIOCTLCMD; case VIDIOC_UNSUBSCRIBE_EVENT: - return v4l2_subdev_call(sd, core, unsubscribe_event, vfh, arg); + if (!(sd->flags & V4L2_SUBDEV_FL_HAS_EVENTS)) + return -ENOIOCTLCMD; + + if (v4l2_subdev_has_op(sd, core, unsubscribe_event)) + return v4l2_subdev_call(sd, core, unsubscribe_event, + vfh, arg); + else + return v4l2_event_subdev_unsubscribe(sd, vfh, sub); #ifdef CONFIG_VIDEO_ADV_DEBUG case VIDIOC_DBG_G_REGISTER: > if (!has_unsubscribe_event) > assign v4l2_event_subdev_unsubscribe as default .unsubscribe ops (somehow) > > > Or maybe v4l2_subdev_init_finalize() it's too late? > I'm completely wrong? What do you think? I like v4l2_subdev_init_finalize() as we're pushing all subdev drivers to use it, so it's an extra incentive. > > Well :) > > Not every subdev drivers, but only the ones I'm testing. > > > > Yesterday I was playing with ov5645 :) And I got: > > > > v4l2-compliance -d /dev/v4l-subdev1 > > > > test VIDIOC_G/S/TRY_EXT_CTRLS: OK > > fail: v4l2-test-controls.cpp(1108): subscribe event for control 'User Controls' failed > > > > Joke apart fully agree and thanks for your hint! > > I will take a look :) > > > > > > ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; > > > > ov5645->sd.dev = &client->dev; > > > > ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
diff --git a/drivers/media/i2c/ov5645.c b/drivers/media/i2c/ov5645.c index 0c32bd2940ec..2c5145d5c616 100644 --- a/drivers/media/i2c/ov5645.c +++ b/drivers/media/i2c/ov5645.c @@ -29,6 +29,7 @@ #include <linux/slab.h> #include <linux/types.h> #include <media/v4l2-ctrls.h> +#include <media/v4l2-event.h> #include <media/v4l2-fwnode.h> #include <media/v4l2-subdev.h> @@ -1034,6 +1035,11 @@ static const struct v4l2_subdev_video_ops ov5645_video_ops = { .s_stream = ov5645_s_stream, }; +static const struct v4l2_subdev_core_ops ov5645_subdev_core_ops = { + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { .enum_mbus_code = ov5645_enum_mbus_code, .enum_frame_size = ov5645_enum_frame_size, @@ -1043,6 +1049,7 @@ static const struct v4l2_subdev_pad_ops ov5645_subdev_pad_ops = { }; static const struct v4l2_subdev_ops ov5645_subdev_ops = { + .core = &ov5645_subdev_core_ops, .video = &ov5645_video_ops, .pad = &ov5645_subdev_pad_ops, }; @@ -1178,7 +1185,8 @@ static int ov5645_probe(struct i2c_client *client) v4l2_i2c_subdev_init(&ov5645->sd, client, &ov5645_subdev_ops); ov5645->sd.internal_ops = &ov5645_internal_ops; - ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + ov5645->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | + V4L2_SUBDEV_FL_HAS_EVENTS; ov5645->pad.flags = MEDIA_PAD_FL_SOURCE; ov5645->sd.dev = &client->dev; ov5645->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
Controls can be exposed to userspace via a v4l-subdevX device, and userspace has to be able to subscribe to control events so that it is notified when the control changes value. Add missing HAS_EVENTS support: flag and .(un)subscribe_event(). Signed-off-by: Tommaso Merciai <tomm.merciai@gmail.com> --- drivers/media/i2c/ov5645.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-)