@@ -66,6 +66,9 @@
#define UB953_REG_GPIO_INPUT_CTRL_OUT_EN(n) BIT(4 + (n))
#define UB953_REG_GPIO_INPUT_CTRL_INPUT_EN(n) BIT(0 + (n))
+#define UB953_REG_BC_CTRL 0x49
+#define UB953_REG_BC_CTRL_CRC_ERR_CLR BIT(3)
+
#define UB953_REG_REV_MASK_ID 0x50
#define UB953_REG_GENERAL_STATUS 0x52
@@ -619,6 +622,12 @@ static int ub953_log_status(struct v4l2_subdev *sd)
ub953_read(priv, UB953_REG_CRC_ERR_CNT2, &v2);
dev_info(dev, "CRC error count %u\n", v1 | (v2 << 8));
+ /* Clear CRC error counter */
+ if (v1 || v2)
+ regmap_update_bits(priv->regmap, UB953_REG_BC_CTRL,
+ UB953_REG_BC_CTRL_CRC_ERR_CLR,
+ UB953_REG_BC_CTRL_CRC_ERR_CLR);
+
ub953_read(priv, UB953_REG_CSI_ERR_CNT, &v);
dev_info(dev, "CSI error count %u\n", v);
Clear the CRC error counter after showing it in ub953_log_status() to make its behavior match the other counter values. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> --- drivers/media/i2c/ds90ub953.c | 9 +++++++++ 1 file changed, 9 insertions(+)