@@ -8,6 +8,7 @@
* Copyright (c) 2023 Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
*/
+#include <linux/bitfield.h>
#include <linux/clk-provider.h>
#include <linux/clk.h>
#include <linux/delay.h>
@@ -146,6 +147,19 @@ static int ub913_write(const struct ub913_data *priv, u8 reg, u8 val)
return ret;
}
+static int ub913_update_bits(const struct ub913_data *priv, u8 reg, u8 mask,
+ u8 val)
+{
+ int ret;
+
+ ret = regmap_update_bits(priv->regmap, reg, mask, val);
+ if (ret < 0)
+ dev_err(&priv->client->dev,
+ "Cannot update register 0x%02x %d!\n", reg, ret);
+
+ return ret;
+}
+
/*
* GPIO chip
*/
@@ -733,10 +747,13 @@ static int ub913_hw_init(struct ub913_data *priv)
if (ret)
return dev_err_probe(dev, ret, "i2c master init failed\n");
- ub913_read(priv, UB913_REG_GENERAL_CFG, &v);
- v &= ~UB913_REG_GENERAL_CFG_PCLK_RISING;
- v |= priv->pclk_polarity_rising ? UB913_REG_GENERAL_CFG_PCLK_RISING : 0;
- ub913_write(priv, UB913_REG_GENERAL_CFG, v);
+ ret = ub913_update_bits(priv, UB913_REG_GENERAL_CFG,
+ UB913_REG_GENERAL_CFG_PCLK_RISING,
+ FIELD_PREP(UB913_REG_GENERAL_CFG_PCLK_RISING,
+ priv->pclk_polarity_rising));
+
+ if (ret)
+ return ret;
return 0;
}
Add error handling to ub913_hw_init() using a new helper function, ub913_update_bits(). Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> --- drivers/media/i2c/ds90ub913.c | 25 +++++++++++++++++++++---- 1 file changed, 21 insertions(+), 4 deletions(-)