From patchwork Thu Dec 5 09:04:28 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keke Li via B4 Relay X-Patchwork-Id: 13894878 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id CA9B21D3566; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733389473; cv=none; b=bQRYwAoblZ0AKKX3ItrbkwHh1rrHK/FhgnbKz0mLz1zZU4RrYbvTXbIpWKlOlH97GE5LIkXGkRJKDmc3vooKsCsx8Irw2QjymzOiFqyOjMv1+6b3qu+FalR0+wRBkzJMQPINf7xX6FxXM7B6tkC7V9FIqHcrM9I9TqdStQLRxPQ= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733389473; c=relaxed/simple; bh=VlSQ6c2sc9CkMoKDoPVB5u6ULarStTusKO9e5qGRuy8=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=A/nTGXOvP+YBoP0wI+FJPH3d7KiJmxT4lW8GfzartRJv+SuEzBjwDFkFCDEFTOMqS92FLvZEC0+BmccJ7ZxSTzGetTo00ZJlESHFYaG5Qqpw/UVEhnuQ7RJ7zU+SjlCEicnR+SGUjoestby0W0eH8mE75FhBW3qg+jSawy3IwZ4= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=qVnlVAuk; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="qVnlVAuk" Received: by smtp.kernel.org (Postfix) with ESMTPS id 92CECC4CEE1; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1733389473; bh=VlSQ6c2sc9CkMoKDoPVB5u6ULarStTusKO9e5qGRuy8=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=qVnlVAukIz0UFeNZiUMxZa+vr36ul89pSg/Ch9yZZztzY7P7tn3dKEFhVW0bqRPyI iXx6vSWoBAJsTEWnUFUqPeluNU+1yss3Z4uAl0xrB/zPngKqDgCB8O+DVcsELPOlWB 6cO4WYSsrfBXmlHfIp+6Qnseo5zjjYxTa+1BOrQGvBm5OKkUZ0qkpqLSDdIDpl6U1S X1psyGwylto1wYidjyoS3o9pZ2r5+0QXpHdZGSHlpOCtMgZ0EGpJs8uTy9ZpDwWRuF 9J3ZGrnJUarW4rNIx/EuPcMJZOQHgopPKlThB3WL+vttt9UV2be6AiY2GbeyEJS8iD 1M6OugjjXJALw== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 857B8E77171; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) From: Keke Li via B4 Relay Date: Thu, 05 Dec 2024 17:04:28 +0800 Subject: [PATCH v4 02/10] media: platform: Add c3 mipi csi2 driver Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241205-c3isp-v4-2-cb1868be0105@amlogic.com> References: <20241205-c3isp-v4-0-cb1868be0105@amlogic.com> In-Reply-To: <20241205-c3isp-v4-0-cb1868be0105@amlogic.com> To: Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kieran.bingham@ideasonboard.com, laurent.pinchart@ideasonboard.com, dan.scally@ideasonboard.com, Keke Li X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1733389471; l=34240; i=keke.li@amlogic.com; s=20240902; h=from:subject:message-id; bh=LOhp98u02tyy6XnfRKImoPb6U4TwyjFsnibAG5FYd1E=; b=Zus+/B48Ynxwu+HNJpMyeodlMtoIDb8jGGfSbnm/o3BSlRCTTH0ldKhDTXGfBXjjbMXVBow0C yM0tXoG8VCaADwvo13fjeBtY+ErkrD3kBVAlKwsWpJsqE5WYkgCdPFl X-Developer-Key: i=keke.li@amlogic.com; a=ed25519; pk=XxNPTsQ0YqMJLLekV456eoKV5gbSlxnViB1k1DhfRmU= X-Endpoint-Received: by B4 Relay for keke.li@amlogic.com/20240902 with auth_id=204 X-Original-From: Keke Li Reply-To: keke.li@amlogic.com From: Keke Li This driver is used to receive mipi data from image sensor. Reviewed-by: Daniel Scally Signed-off-by: Keke Li --- MAINTAINERS | 7 + drivers/media/platform/amlogic/Kconfig | 1 + drivers/media/platform/amlogic/Makefile | 2 + drivers/media/platform/amlogic/c3/Kconfig | 3 + drivers/media/platform/amlogic/c3/Makefile | 3 + .../media/platform/amlogic/c3/mipi-csi2/Kconfig | 16 + .../media/platform/amlogic/c3/mipi-csi2/Makefile | 3 + .../platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.c | 900 +++++++++++++++++++++ 8 files changed, 935 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 21f855fe468b..9b405a694881 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1224,6 +1224,13 @@ F: Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml F: drivers/perf/amlogic/ F: include/soc/amlogic/ +AMLOGIC MIPI CSI2 DRIVER +M: Keke Li +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/amlogic,c3-mipi-csi2.yaml +F: drivers/media/platform/amlogic/c3/mipi-csi2/ + AMLOGIC RTC DRIVER M: Yiting Deng M: Xianwei Zhao diff --git a/drivers/media/platform/amlogic/Kconfig b/drivers/media/platform/amlogic/Kconfig index 5014957404e9..458acf3d5fa8 100644 --- a/drivers/media/platform/amlogic/Kconfig +++ b/drivers/media/platform/amlogic/Kconfig @@ -2,4 +2,5 @@ comment "Amlogic media platform drivers" +source "drivers/media/platform/amlogic/c3/Kconfig" source "drivers/media/platform/amlogic/meson-ge2d/Kconfig" diff --git a/drivers/media/platform/amlogic/Makefile b/drivers/media/platform/amlogic/Makefile index d3cdb8fa4ddb..c744afcd1b9e 100644 --- a/drivers/media/platform/amlogic/Makefile +++ b/drivers/media/platform/amlogic/Makefile @@ -1,2 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only + +obj-y += c3/ obj-y += meson-ge2d/ diff --git a/drivers/media/platform/amlogic/c3/Kconfig b/drivers/media/platform/amlogic/c3/Kconfig new file mode 100644 index 000000000000..098d458747b8 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/Kconfig @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +source "drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig" diff --git a/drivers/media/platform/amlogic/c3/Makefile b/drivers/media/platform/amlogic/c3/Makefile new file mode 100644 index 000000000000..a468fb782f94 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-y += mipi-csi2/ diff --git a/drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig b/drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig new file mode 100644 index 000000000000..0d7b2e203273 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config VIDEO_C3_MIPI_CSI2 + tristate "Amlogic C3 MIPI CSI-2 receiver" + depends on ARCH_MESON || COMPILE_TEST + depends on VIDEO_DEV + depends on OF + select MEDIA_CONTROLLER + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Video4Linux2 driver for Amlogic C3 MIPI CSI-2 receiver. + C3 MIPI CSI-2 receiver is used to receive MIPI data from + image sensor. + + To compile this driver as a module choose m here. diff --git a/drivers/media/platform/amlogic/c3/mipi-csi2/Makefile b/drivers/media/platform/amlogic/c3/mipi-csi2/Makefile new file mode 100644 index 000000000000..cc08fc722bfd --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-csi2/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_VIDEO_C3_MIPI_CSI2) += c3-mipi-csi2.o diff --git a/drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.c b/drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.c new file mode 100644 index 000000000000..861fccc4ca9e --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-csi2/c3-mipi-csi2.c @@ -0,0 +1,900 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2024 Amlogic, Inc. All rights reserved + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include + +/* C3 CSI-2 submodule definition */ +enum { + SUBMD_APHY, + SUBMD_DPHY, + SUBMD_HOST, +}; + +#define CSI2_SUBMD_MASK GENMASK(17, 16) +#define CSI2_SUBMD_SHIFT 16 +#define CSI2_SUBMD(x) (((x) & (CSI2_SUBMD_MASK)) >> (CSI2_SUBMD_SHIFT)) +#define CSI2_REG_ADDR_MASK GENMASK(15, 0) +#define CSI2_REG_ADDR(x) ((x) & (CSI2_REG_ADDR_MASK)) +#define CSI2_REG_A(x) ((SUBMD_APHY << CSI2_SUBMD_SHIFT) | (x)) +#define CSI2_REG_D(x) ((SUBMD_DPHY << CSI2_SUBMD_SHIFT) | (x)) +#define CSI2_REG_H(x) ((SUBMD_HOST << CSI2_SUBMD_SHIFT) | (x)) + +#define MIPI_CSI2_CLOCK_NUM_MAX 3 +#define MIPI_CSI2_SUBDEV_NAME "c3-mipi-csi2" + +/* C3 CSI-2 APHY register */ +#define CSI_PHY_CNTL0 CSI2_REG_A(0x44) +#define CSI_PHY_CNTL0_HS_LP_BIAS_EN BIT(10) +#define CSI_PHY_CNTL0_HS_RX_TRIM_11 (11 << 11) +#define CSI_PHY_CNTL0_LP_LOW_VTH_2 (2 << 16) +#define CSI_PHY_CNTL0_LP_HIGH_VTH_4 (4 << 20) +#define CSI_PHY_CNTL0_DATA_LANE0_HS_DIG_EN BIT(24) +#define CSI_PHY_CNTL0_DATA_LANE1_HS_DIG_EN BIT(25) +#define CSI_PHY_CNTL0_CLK0_LANE_HS_DIG_EN BIT(26) +#define CSI_PHY_CNTL0_DATA_LANE2_HS_DIG_EN BIT(27) +#define CSI_PHY_CNTL0_DATA_LANE3_HS_DIG_EN BIT(28) + +#define CSI_PHY_CNTL1 CSI2_REG_A(0x48) +#define CSI_PHY_CNTL1_HS_EQ_CAP_SMALL (2 << 16) +#define CSI_PHY_CNTL1_HS_EQ_CAP_BIG (3 << 16) +#define CSI_PHY_CNTL1_HS_EQ_RES_MIN (3 << 18) +#define CSI_PHY_CNTL1_HS_EQ_RES_MED (2 << 18) +#define CSI_PHY_CNTL1_HS_EQ_RES_MAX BIT(18) +#define CSI_PHY_CNTL1_CLK_CHN_EQ_MAX_GAIN BIT(20) +#define CSI_PHY_CNTL1_DATA_CHN_EQ_MAX_GAIN BIT(21) +#define CSI_PHY_CNTL1_COM_BG_EN BIT(24) +#define CSI_PHY_CNTL1_HS_SYNC_EN BIT(25) + +/* C3 CSI-2 DPHY register */ +#define MIPI_PHY_CTRL CSI2_REG_D(0x00) +#define MIPI_PHY_CTRL_DATA_LANE0_EN (0 << 0) +#define MIPI_PHY_CTRL_DATA_LANE0_DIS BIT(0) +#define MIPI_PHY_CTRL_DATA_LANE1_EN (0 << 1) +#define MIPI_PHY_CTRL_DATA_LANE1_DIS BIT(1) +#define MIPI_PHY_CTRL_DATA_LANE2_EN (0 << 2) +#define MIPI_PHY_CTRL_DATA_LANE2_DIS BIT(2) +#define MIPI_PHY_CTRL_DATA_LANE3_EN (0 << 3) +#define MIPI_PHY_CTRL_DATA_LANE3_DIS BIT(3) +#define MIPI_PHY_CTRL_CLOCK_LANE_EN (0 << 4) +#define MIPI_PHY_CTRL_CLOCK_LANE_DIS BIT(4) + +#define MIPI_PHY_CLK_LANE_CTRL CSI2_REG_D(0x04) +#define MIPI_PHY_CLK_LANE_CTRL_FORCE_ULPS_ENTER BIT(0) +#define MIPI_PHY_CLK_LANE_CTRL_FORCE_ULPS_EXIT BIT(1) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS (0 << 3) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS_2 BIT(3) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS_4 (2 << 3) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS_8 (3 << 3) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS_16 (4 << 3) +#define MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_EN BIT(6) +#define MIPI_PHY_CLK_LANE_CTRL_LPEN_DIS BIT(7) +#define MIPI_PHY_CLK_LANE_CTRL_END_EN BIT(8) +#define MIPI_PHY_CLK_LANE_CTRL_HS_RX_EN BIT(9) + +#define MIPI_PHY_DATA_LANE_CTRL1 CSI2_REG_D(0x0c) +#define MIPI_PHY_DATA_LANE_CTRL1_INSERT_ERRESC BIT(0) +#define MIPI_PHY_DATA_LANE_CTRL1_HS_SYNC_CHK_EN BIT(1) +#define MIPI_PHY_DATA_LANE_CTRL1_PIPE_MASK GENMASK(6, 2) +#define MIPI_PHY_DATA_LANE_CTRL1_PIPE_ALL_EN (0x1f << 2) +#define MIPI_PHY_DATA_LANE_CTRL1_PIPE_DELAY_MASK GENMASK(9, 7) +#define MIPI_PHY_DATA_LANE_CTRL1_PIPE_DELAY_3 (3 << 7) + +#define MIPI_PHY_TCLK_MISS CSI2_REG_D(0x10) +#define MIPI_PHY_TCLK_MISS_CYCLES_MASK GENMASK(7, 0) +#define MIPI_PHY_TCLK_MISS_CYCLES_9 (9 << 0) + +#define MIPI_PHY_TCLK_SETTLE CSI2_REG_D(0x14) +#define MIPI_PHY_TCLK_SETTLE_CYCLES_MASK GENMASK(7, 0) +#define MIPI_PHY_TCLK_SETTLE_CYCLES_31 (31 << 0) + +#define MIPI_PHY_THS_EXIT CSI2_REG_D(0x18) +#define MIPI_PHY_THS_EXIT_CYCLES_MASK GENMASK(7, 0) +#define MIPI_PHY_THS_EXIT_CYCLES_8 (8 << 0) + +#define MIPI_PHY_THS_SKIP CSI2_REG_D(0x1c) +#define MIPI_PHY_THS_SKIP_CYCLES_MASK GENMASK(7, 0) +#define MIPI_PHY_THS_SKIP_CYCLES_10 (10 << 0) + +#define MIPI_PHY_THS_SETTLE CSI2_REG_D(0x20) +#define MIPI_PHY_THS_SETTLE_CYCLES_MASK GENMASK(7, 0) + +#define MIPI_PHY_TINIT CSI2_REG_D(0x24) +#define MIPI_PHY_TINIT_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TINIT_CYCLES_20000 (20000 << 0) + +#define MIPI_PHY_TULPS_C CSI2_REG_D(0x28) +#define MIPI_PHY_TULPS_C_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TULPS_C_CYCLES_4096 (4096 << 0) + +#define MIPI_PHY_TULPS_S CSI2_REG_D(0x2c) +#define MIPI_PHY_TULPS_S_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TULPS_S_CYCLES_256 (256 << 0) + +#define MIPI_PHY_TMBIAS CSI2_REG_D(0x30) +#define MIPI_PHY_TMBIAS_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TMBIAS_CYCLES_256 (256 << 0) + +#define MIPI_PHY_TLP_EN_W CSI2_REG_D(0x34) +#define MIPI_PHY_TLP_EN_W_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TLP_EN_W_CYCLES_12 (12 << 0) + +#define MIPI_PHY_TLPOK CSI2_REG_D(0x38) +#define MIPI_PHY_TLPOK_CYCLES_MASK GENMASK(31, 0) +#define MIPI_PHY_TLPOK_CYCLES_256 (256 << 0) + +#define MIPI_PHY_TWD_INIT CSI2_REG_D(0x3c) +#define MIPI_PHY_TWD_INIT_DOG_MASK GENMASK(31, 0) +#define MIPI_PHY_TWD_INIT_DOG_0X400000 (0x400000 << 0) + +#define MIPI_PHY_TWD_HS CSI2_REG_D(0x40) +#define MIPI_PHY_TWD_HS_DOG_MASK GENMASK(31, 0) +#define MIPI_PHY_TWD_HS_DOG_0X400000 (0x400000 << 0) + +#define MIPI_PHY_MUX_CTRL0 CSI2_REG_D(0x284) +#define MIPI_PHY_MUX_CTRL0_SFEN3_SRC_MASK GENMASK(3, 0) +#define MIPI_PHY_MUX_CTRL0_SFEN3_SRC_LANE0 (0 << 0) +#define MIPI_PHY_MUX_CTRL0_SFEN3_SRC_LANE1 BIT(0) +#define MIPI_PHY_MUX_CTRL0_SFEN3_SRC_LANE2 (2 << 0) +#define MIPI_PHY_MUX_CTRL0_SFEN3_SRC_LANE3 (3 << 0) +#define MIPI_PHY_MUX_CTRL0_SFEN2_SRC_MASK GENMASK(7, 4) +#define MIPI_PHY_MUX_CTRL0_SFEN2_SRC_LANE0 (0 << 4) +#define MIPI_PHY_MUX_CTRL0_SFEN2_SRC_LANE1 BIT(4) +#define MIPI_PHY_MUX_CTRL0_SFEN2_SRC_LANE2 (2 << 4) +#define MIPI_PHY_MUX_CTRL0_SFEN2_SRC_LANE3 (3 << 4) +#define MIPI_PHY_MUX_CTRL0_SFEN1_SRC_MASK GENMASK(11, 8) +#define MIPI_PHY_MUX_CTRL0_SFEN1_SRC_LANE0 (0 << 8) +#define MIPI_PHY_MUX_CTRL0_SFEN1_SRC_LANE1 BIT(8) +#define MIPI_PHY_MUX_CTRL0_SFEN1_SRC_LANE2 (2 << 8) +#define MIPI_PHY_MUX_CTRL0_SFEN1_SRC_LANE3 (3 << 8) +#define MIPI_PHY_MUX_CTRL0_SFEN0_SRC_MASK GENMASK(14, 12) +#define MIPI_PHY_MUX_CTRL0_SFEN0_SRC_LANE0 (0 << 12) +#define MIPI_PHY_MUX_CTRL0_SFEN0_SRC_LANE1 BIT(12) +#define MIPI_PHY_MUX_CTRL0_SFEN0_SRC_LANE2 (2 << 12) +#define MIPI_PHY_MUX_CTRL0_SFEN0_SRC_LANE3 (3 << 12) + +#define MIPI_PHY_MUX_CTRL1 CSI2_REG_D(0x288) +#define MIPI_PHY_MUX_CTRL1_LANE3_SRC_MASK GENMASK(3, 0) +#define MIPI_PHY_MUX_CTRL1_LANE3_SRC_SFEN0 (0 << 0) +#define MIPI_PHY_MUX_CTRL1_LANE3_SRC_SFEN1 BIT(0) +#define MIPI_PHY_MUX_CTRL1_LANE3_SRC_SFEN2 (2 << 0) +#define MIPI_PHY_MUX_CTRL1_LANE3_SRC_SFEN3 (3 << 0) +#define MIPI_PHY_MUX_CTRL1_LANE2_SRC_MASK GENMASK(7, 4) +#define MIPI_PHY_MUX_CTRL1_LANE2_SRC_SFEN0 (0 << 4) +#define MIPI_PHY_MUX_CTRL1_LANE2_SRC_SFEN1 BIT(4) +#define MIPI_PHY_MUX_CTRL1_LANE2_SRC_SFEN2 (2 << 4) +#define MIPI_PHY_MUX_CTRL1_LANE2_SRC_SFEN3 (3 << 4) +#define MIPI_PHY_MUX_CTRL1_LANE1_SRC_MASK GENMASK(11, 8) +#define MIPI_PHY_MUX_CTRL1_LANE1_SRC_SFEN0 (0 << 8) +#define MIPI_PHY_MUX_CTRL1_LANE1_SRC_SFEN1 BIT(8) +#define MIPI_PHY_MUX_CTRL1_LANE1_SRC_SFEN2 (2 << 8) +#define MIPI_PHY_MUX_CTRL1_LANE1_SRC_SFEN3 (3 << 8) +#define MIPI_PHY_MUX_CTRL1_LANE0_SRC_MASK GENMASK(14, 12) +#define MIPI_PHY_MUX_CTRL1_LANE0_SRC_SFEN0 (0 << 12) +#define MIPI_PHY_MUX_CTRL1_LANE0_SRC_SFEN1 BIT(12) +#define MIPI_PHY_MUX_CTRL1_LANE0_SRC_SFEN2 (2 << 12) +#define MIPI_PHY_MUX_CTRL1_LANE0_SRC_SFEN3 (3 << 12) + +/* C3 CSI-2 HOST register */ +#define CSI2_HOST_N_LANES CSI2_REG_H(0x04) +#define CSI2_HOST_N_LANES_MASK GENMASK(1, 0) +#define CSI2_HOST_N_LANES_1 (0 << 0) +#define CSI2_HOST_N_LANES_2 BIT(0) +#define CSI2_HOST_N_LANES_3 (2 << 0) +#define CSI2_HOST_N_LANES_4 (3 << 0) + +#define CSI2_HOST_CSI2_RESETN CSI2_REG_H(0x10) +#define CSI2_HOST_CSI2_RESETN_MASK BIT(0) +#define CSI2_HOST_CSI2_RESETN_ACTIVE (0 << 0) +#define CSI2_HOST_CSI2_RESETN_EXIT BIT(0) + +#define MIPI_CSI2_MAX_WIDTH 2888 +#define MIPI_CSI2_MIN_WIDTH 160 +#define MIPI_CSI2_MAX_HEIGHT 2240 +#define MIPI_CSI2_MIN_HEIGHT 120 +#define MIPI_CSI2_DEFAULT_WIDTH 1920 +#define MIPI_CSI2_DEFAULT_HEIGHT 1080 +#define MIPI_CSI2_DEFAULT_FMT MEDIA_BUS_FMT_SRGGB10_1X10 + +/* C3 CSI-2 pad list */ +enum { + MIPI_CSI2_PAD_SINK, + MIPI_CSI2_PAD_SRC, + MIPI_CSI2_PAD_MAX +}; + +/* + * struct csi_info - MIPI CSI2 information + * + * @clocks: array of MIPI CSI2 clock names + * @clock_rates: array of MIPI CSI2 clock rate + * @clock_num: actual clock number + */ +struct csi_info { + char *clocks[MIPI_CSI2_CLOCK_NUM_MAX]; + u32 clock_rates[MIPI_CSI2_CLOCK_NUM_MAX]; + u32 clock_num; +}; + +/* + * struct csi_device - MIPI CSI2 platform device + * + * @dev: pointer to the struct device + * @aphy: MIPI CSI2 aphy register address + * @dphy: MIPI CSI2 dphy register address + * @host: MIPI CSI2 host register address + * @clks: array of MIPI CSI2 clocks + * @sd: MIPI CSI2 sub-device + * @pads: MIPI CSI2 sub-device pads + * @notifier: notifier to register on the v4l2-async API + * @src_sd: source sub-device + * @bus: MIPI CSI2 bus information + * @src_sd_pad: source sub-device pad + * @info: version-specific MIPI CSI2 information + */ +struct csi_device { + struct device *dev; + void __iomem *aphy; + void __iomem *dphy; + void __iomem *host; + struct clk_bulk_data clks[MIPI_CSI2_CLOCK_NUM_MAX]; + + struct v4l2_subdev sd; + struct media_pad pads[MIPI_CSI2_PAD_MAX]; + struct v4l2_async_notifier notifier; + struct v4l2_subdev *src_sd; + struct v4l2_mbus_config_mipi_csi2 bus; + + u16 src_sd_pad; + const struct csi_info *info; +}; + +static const u32 c3_mipi_csi_formats[] = { + MEDIA_BUS_FMT_SBGGR10_1X10, + MEDIA_BUS_FMT_SGBRG10_1X10, + MEDIA_BUS_FMT_SGRBG10_1X10, + MEDIA_BUS_FMT_SRGGB10_1X10, + MEDIA_BUS_FMT_SBGGR12_1X12, + MEDIA_BUS_FMT_SGBRG12_1X12, + MEDIA_BUS_FMT_SGRBG12_1X12, + MEDIA_BUS_FMT_SRGGB12_1X12, +}; + +/* Hardware configuration */ + +static void c3_mipi_csi_write(struct csi_device *csi, u32 reg, u32 val) +{ + void __iomem *addr; + + switch (CSI2_SUBMD(reg)) { + case SUBMD_APHY: + addr = csi->aphy + CSI2_REG_ADDR(reg); + break; + case SUBMD_DPHY: + addr = csi->dphy + CSI2_REG_ADDR(reg); + break; + case SUBMD_HOST: + addr = csi->host + CSI2_REG_ADDR(reg); + break; + default: + dev_err(csi->dev, "Invalid sub-module: %lu\n", CSI2_SUBMD(reg)); + return; + } + + writel(val, addr); +} + +static void c3_mipi_csi_cfg_aphy(struct csi_device *csi) +{ + c3_mipi_csi_write(csi, CSI_PHY_CNTL0, + CSI_PHY_CNTL0_HS_LP_BIAS_EN | + CSI_PHY_CNTL0_HS_RX_TRIM_11 | + CSI_PHY_CNTL0_LP_LOW_VTH_2 | + CSI_PHY_CNTL0_LP_HIGH_VTH_4 | + CSI_PHY_CNTL0_DATA_LANE0_HS_DIG_EN | + CSI_PHY_CNTL0_DATA_LANE1_HS_DIG_EN | + CSI_PHY_CNTL0_CLK0_LANE_HS_DIG_EN | + CSI_PHY_CNTL0_DATA_LANE2_HS_DIG_EN | + CSI_PHY_CNTL0_DATA_LANE3_HS_DIG_EN); + + c3_mipi_csi_write(csi, CSI_PHY_CNTL1, + CSI_PHY_CNTL1_HS_EQ_CAP_SMALL | + CSI_PHY_CNTL1_HS_EQ_RES_MED | + CSI_PHY_CNTL1_CLK_CHN_EQ_MAX_GAIN | + CSI_PHY_CNTL1_DATA_CHN_EQ_MAX_GAIN | + CSI_PHY_CNTL1_COM_BG_EN | + CSI_PHY_CNTL1_HS_SYNC_EN); +} + +static void c3_mipi_csi_cfg_dphy(struct csi_device *csi, s64 rate) +{ + u32 val; + u32 settle; + + /* Calculate the high speed settle */ + val = DIV_ROUND_UP(1000000000, rate); + settle = (16 * val + 230) / 10; + + c3_mipi_csi_write(csi, MIPI_PHY_CLK_LANE_CTRL, + MIPI_PHY_CLK_LANE_CTRL_HS_RX_EN | + MIPI_PHY_CLK_LANE_CTRL_END_EN | + MIPI_PHY_CLK_LANE_CTRL_LPEN_DIS | + MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_EN | + MIPI_PHY_CLK_LANE_CTRL_TCLK_ZERO_HS_8); + + c3_mipi_csi_write(csi, MIPI_PHY_TCLK_MISS, MIPI_PHY_TCLK_MISS_CYCLES_9); + c3_mipi_csi_write(csi, MIPI_PHY_TCLK_SETTLE, MIPI_PHY_TCLK_SETTLE_CYCLES_31); + c3_mipi_csi_write(csi, MIPI_PHY_THS_EXIT, MIPI_PHY_THS_EXIT_CYCLES_8); + c3_mipi_csi_write(csi, MIPI_PHY_THS_SKIP, MIPI_PHY_THS_SKIP_CYCLES_10); + c3_mipi_csi_write(csi, MIPI_PHY_THS_SETTLE, settle); + c3_mipi_csi_write(csi, MIPI_PHY_TINIT, MIPI_PHY_TINIT_CYCLES_20000); + c3_mipi_csi_write(csi, MIPI_PHY_TMBIAS, MIPI_PHY_TMBIAS_CYCLES_256); + c3_mipi_csi_write(csi, MIPI_PHY_TULPS_C, MIPI_PHY_TULPS_C_CYCLES_4096); + c3_mipi_csi_write(csi, MIPI_PHY_TULPS_S, MIPI_PHY_TULPS_S_CYCLES_256); + c3_mipi_csi_write(csi, MIPI_PHY_TLP_EN_W, MIPI_PHY_TLP_EN_W_CYCLES_12); + c3_mipi_csi_write(csi, MIPI_PHY_TLPOK, MIPI_PHY_TLPOK_CYCLES_256); + c3_mipi_csi_write(csi, MIPI_PHY_TWD_INIT, MIPI_PHY_TWD_INIT_DOG_0X400000); + c3_mipi_csi_write(csi, MIPI_PHY_TWD_HS, MIPI_PHY_TWD_HS_DOG_0X400000); + + c3_mipi_csi_write(csi, MIPI_PHY_DATA_LANE_CTRL1, + MIPI_PHY_DATA_LANE_CTRL1_INSERT_ERRESC | + MIPI_PHY_DATA_LANE_CTRL1_HS_SYNC_CHK_EN | + MIPI_PHY_DATA_LANE_CTRL1_PIPE_ALL_EN | + MIPI_PHY_DATA_LANE_CTRL1_PIPE_DELAY_3); + + /* Set the order of lanes */ + c3_mipi_csi_write(csi, MIPI_PHY_MUX_CTRL0, + MIPI_PHY_MUX_CTRL0_SFEN3_SRC_LANE3 | + MIPI_PHY_MUX_CTRL0_SFEN2_SRC_LANE2 | + MIPI_PHY_MUX_CTRL0_SFEN1_SRC_LANE1 | + MIPI_PHY_MUX_CTRL0_SFEN0_SRC_LANE0); + + c3_mipi_csi_write(csi, MIPI_PHY_MUX_CTRL1, + MIPI_PHY_MUX_CTRL1_LANE3_SRC_SFEN3 | + MIPI_PHY_MUX_CTRL1_LANE2_SRC_SFEN2 | + MIPI_PHY_MUX_CTRL1_LANE1_SRC_SFEN1 | + MIPI_PHY_MUX_CTRL1_LANE0_SRC_SFEN0); + + /* Enable digital data and clock lanes */ + c3_mipi_csi_write(csi, MIPI_PHY_CTRL, + MIPI_PHY_CTRL_DATA_LANE0_EN | + MIPI_PHY_CTRL_DATA_LANE1_EN | + MIPI_PHY_CTRL_DATA_LANE2_EN | + MIPI_PHY_CTRL_DATA_LANE3_EN | + MIPI_PHY_CTRL_CLOCK_LANE_EN); +} + +static void c3_mipi_csi_cfg_host(struct csi_device *csi) +{ + /* Reset CSI-2 controller output */ + c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_CSI2_RESETN_ACTIVE); + c3_mipi_csi_write(csi, CSI2_HOST_CSI2_RESETN, CSI2_HOST_CSI2_RESETN_EXIT); + + /* Set data lane number */ + c3_mipi_csi_write(csi, CSI2_HOST_N_LANES, csi->bus.num_data_lanes - 1); +} + +static int c3_mipi_csi_start_stream(struct csi_device *csi) +{ + s64 link_freq; + s64 lane_rate; + + link_freq = v4l2_get_link_freq(csi->src_sd->ctrl_handler, 0, 0); + if (link_freq < 0) { + dev_err(csi->dev, "Unable to obtain link frequency: %lld\n", link_freq); + return link_freq; + } + + lane_rate = link_freq * 2; + if (lane_rate > 1500000000) { + dev_err(csi->dev, "Invalid lane rate: %lld\n", lane_rate); + return -EINVAL; + } + + c3_mipi_csi_cfg_aphy(csi); + c3_mipi_csi_cfg_dphy(csi, lane_rate); + c3_mipi_csi_cfg_host(csi); + + return 0; +} + +static int c3_mipi_csi_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + u32 pad, u64 streams_mask) +{ + struct csi_device *csi = v4l2_get_subdevdata(sd); + u64 sink_streams; + int ret; + + pm_runtime_resume_and_get(csi->dev); + + c3_mipi_csi_start_stream(csi); + + sink_streams = v4l2_subdev_state_xlate_streams(state, pad, + MIPI_CSI2_PAD_SINK, + &streams_mask); + ret = v4l2_subdev_enable_streams(csi->src_sd, + csi->src_sd_pad, + sink_streams); + if (ret) { + pm_runtime_put(csi->dev); + return ret; + } + + return 0; +} + +static int c3_mipi_csi_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + u32 pad, u64 streams_mask) +{ + struct csi_device *csi = v4l2_get_subdevdata(sd); + u64 sink_streams; + int ret; + + sink_streams = v4l2_subdev_state_xlate_streams(state, pad, + MIPI_CSI2_PAD_SINK, + &streams_mask); + ret = v4l2_subdev_disable_streams(csi->src_sd, + csi->src_sd_pad, + sink_streams); + if (ret) + dev_err(csi->dev, "Failed to disable %s\n", csi->src_sd->name); + + pm_runtime_put(csi->dev); + + return ret; +} + +static int c3_mipi_csi_cfg_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = MIPI_CSI2_DEFAULT_WIDTH, + .height = MIPI_CSI2_DEFAULT_HEIGHT, + .code = MIPI_CSI2_DEFAULT_FMT, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_RAW, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_FULL_RANGE, + .xfer_func = V4L2_XFER_FUNC_NONE, + }; + int ret; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int c3_mipi_csi_init_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes; + struct v4l2_subdev_krouting routing; + + routes.sink_pad = MIPI_CSI2_PAD_SINK; + routes.sink_stream = 0; + routes.source_pad = MIPI_CSI2_PAD_SRC; + routes.source_stream = 0; + routes.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE; + + routing.num_routes = 1; + routing.routes = &routes; + + return c3_mipi_csi_cfg_routing(sd, state, &routing); +} + +static int c3_mipi_csi_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + switch (code->pad) { + case MIPI_CSI2_PAD_SINK: + if (code->index >= ARRAY_SIZE(c3_mipi_csi_formats)) + return -EINVAL; + + code->code = c3_mipi_csi_formats[code->index]; + break; + case MIPI_CSI2_PAD_SRC: + struct v4l2_mbus_framefmt *fmt; + + if (code->index) + return -EINVAL; + + fmt = v4l2_subdev_state_get_format(state, code->pad); + code->code = fmt->code; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int c3_mipi_csi_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt; + unsigned int i; + + if (format->pad != MIPI_CSI2_PAD_SINK) + return v4l2_subdev_get_fmt(sd, state, format); + + fmt = v4l2_subdev_state_get_format(state, format->pad); + + for (i = 0; i < ARRAY_SIZE(c3_mipi_csi_formats); i++) { + if (format->format.code == c3_mipi_csi_formats[i]) { + fmt->code = c3_mipi_csi_formats[i]; + break; + } + } + + if (i == ARRAY_SIZE(c3_mipi_csi_formats)) + fmt->code = c3_mipi_csi_formats[0]; + + fmt->width = clamp_t(u32, format->format.width, + MIPI_CSI2_MIN_WIDTH, MIPI_CSI2_MAX_WIDTH); + fmt->height = clamp_t(u32, format->format.height, + MIPI_CSI2_MIN_HEIGHT, MIPI_CSI2_MAX_HEIGHT); + fmt->colorspace = V4L2_COLORSPACE_RAW; + fmt->xfer_func = V4L2_XFER_FUNC_NONE; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_601; + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; + + format->format = *fmt; + + /* Synchronize the format to source pad */ + fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC); + *fmt = format->format; + + return 0; +} + +static int c3_mipi_csi_init_state(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_mbus_framefmt *sink_fmt; + struct v4l2_mbus_framefmt *src_fmt; + + sink_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SINK); + src_fmt = v4l2_subdev_state_get_format(state, MIPI_CSI2_PAD_SRC); + + sink_fmt->width = MIPI_CSI2_DEFAULT_WIDTH; + sink_fmt->height = MIPI_CSI2_DEFAULT_HEIGHT; + sink_fmt->field = V4L2_FIELD_NONE; + sink_fmt->code = MIPI_CSI2_DEFAULT_FMT; + sink_fmt->colorspace = V4L2_COLORSPACE_RAW; + sink_fmt->xfer_func = V4L2_XFER_FUNC_NONE; + sink_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601; + sink_fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; + + *src_fmt = *sink_fmt; + + return c3_mipi_csi_init_routing(sd, state); +} + +static const struct v4l2_subdev_pad_ops c3_mipi_csi_pad_ops = { + .enum_mbus_code = c3_mipi_csi_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = c3_mipi_csi_set_fmt, + .enable_streams = c3_mipi_csi_enable_streams, + .disable_streams = c3_mipi_csi_disable_streams, +}; + +static const struct v4l2_subdev_ops c3_mipi_csi_subdev_ops = { + .pad = &c3_mipi_csi_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops c3_mipi_csi_internal_ops = { + .init_state = c3_mipi_csi_init_state, +}; + +/* Media entity operations */ +static const struct media_entity_operations c3_mipi_csi_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* PM runtime */ + +static int c3_mipi_csi_runtime_suspend(struct device *dev) +{ + struct csi_device *csi = dev_get_drvdata(dev); + + clk_bulk_disable_unprepare(csi->info->clock_num, csi->clks); + + return 0; +} + +static int c3_mipi_csi_runtime_resume(struct device *dev) +{ + struct csi_device *csi = dev_get_drvdata(dev); + + return clk_bulk_prepare_enable(csi->info->clock_num, csi->clks); +} + +static const struct dev_pm_ops c3_mipi_csi_pm_ops = { + SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + RUNTIME_PM_OPS(c3_mipi_csi_runtime_suspend, + c3_mipi_csi_runtime_resume, NULL) +}; + +/* Probe/remove & platform driver */ + +static int c3_mipi_csi_subdev_init(struct csi_device *csi) +{ + struct v4l2_subdev *sd = &csi->sd; + int ret; + + v4l2_subdev_init(sd, &c3_mipi_csi_subdev_ops); + sd->owner = THIS_MODULE; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sd->internal_ops = &c3_mipi_csi_internal_ops; + snprintf(sd->name, sizeof(sd->name), "%s", MIPI_CSI2_SUBDEV_NAME); + + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + sd->entity.ops = &c3_mipi_csi_entity_ops; + + sd->dev = csi->dev; + v4l2_set_subdevdata(sd, csi); + + csi->pads[MIPI_CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + csi->pads[MIPI_CSI2_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&sd->entity, MIPI_CSI2_PAD_MAX, csi->pads); + if (ret) + return ret; + + ret = v4l2_subdev_init_finalize(sd); + if (ret) { + media_entity_cleanup(&sd->entity); + return ret; + } + + return 0; +} + +static void c3_mipi_csi_subdev_deinit(struct csi_device *csi) +{ + v4l2_subdev_cleanup(&csi->sd); + media_entity_cleanup(&csi->sd.entity); +} + +/* Subdev notifier register */ +static int c3_mipi_csi_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_connection *asc) +{ + struct csi_device *csi = v4l2_get_subdevdata(notifier->sd); + struct media_pad *sink = &csi->sd.entity.pads[MIPI_CSI2_PAD_SINK]; + int ret; + + ret = media_entity_get_fwnode_pad(&sd->entity, + sd->fwnode, MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(csi->dev, "Failed to find pad for %s\n", sd->name); + return ret; + } + + csi->src_sd = sd; + csi->src_sd_pad = ret; + + return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static const struct v4l2_async_notifier_operations c3_mipi_csi_notify_ops = { + .bound = c3_mipi_csi_notify_bound, +}; + +static int c3_mipi_csi_async_register(struct csi_device *csi) +{ + struct v4l2_fwnode_endpoint vep = { + .bus_type = V4L2_MBUS_CSI2_DPHY, + }; + struct v4l2_async_connection *asc; + struct fwnode_handle *ep; + int ret; + + v4l2_async_subdev_nf_init(&csi->notifier, &csi->sd); + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(csi->dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!ep) + return -ENOTCONN; + + ret = v4l2_fwnode_endpoint_parse(ep, &vep); + if (ret) + goto err_put_handle; + + csi->bus = vep.bus.mipi_csi2; + if (csi->bus.num_data_lanes < 1 || csi->bus.num_data_lanes > 4) { + dev_err(csi->dev, "Unsupported data lanes number\n"); + goto err_put_handle; + } + + asc = v4l2_async_nf_add_fwnode_remote(&csi->notifier, ep, + struct v4l2_async_connection); + if (IS_ERR(asc)) { + ret = PTR_ERR(asc); + goto err_put_handle; + } + + csi->notifier.ops = &c3_mipi_csi_notify_ops; + ret = v4l2_async_nf_register(&csi->notifier); + if (ret) + goto err_cleanup_nf; + + ret = v4l2_async_register_subdev(&csi->sd); + if (ret) + goto err_unregister_nf; + + fwnode_handle_put(ep); + + return 0; + +err_unregister_nf: + v4l2_async_nf_unregister(&csi->notifier); +err_cleanup_nf: + v4l2_async_nf_cleanup(&csi->notifier); +err_put_handle: + fwnode_handle_put(ep); + return ret; +} + +static void c3_mipi_csi_async_unregister(struct csi_device *csi) +{ + v4l2_async_unregister_subdev(&csi->sd); + v4l2_async_nf_unregister(&csi->notifier); + v4l2_async_nf_cleanup(&csi->notifier); +} + +static int c3_mipi_csi_ioremap_resource(struct csi_device *csi) +{ + struct device *dev = csi->dev; + struct platform_device *pdev = to_platform_device(dev); + + csi->aphy = devm_platform_ioremap_resource_byname(pdev, "aphy"); + if (IS_ERR(csi->aphy)) + return PTR_ERR(csi->aphy); + + csi->dphy = devm_platform_ioremap_resource_byname(pdev, "dphy"); + if (IS_ERR(csi->dphy)) + return PTR_ERR(csi->dphy); + + csi->host = devm_platform_ioremap_resource_byname(pdev, "host"); + if (IS_ERR(csi->host)) + return PTR_ERR(csi->host); + + return 0; +} + +static int c3_mipi_csi_configure_clocks(struct csi_device *csi) +{ + const struct csi_info *info = csi->info; + int ret; + u32 i; + + for (i = 0; i < info->clock_num; i++) + csi->clks[i].id = info->clocks[i]; + + ret = devm_clk_bulk_get(csi->dev, info->clock_num, csi->clks); + if (ret) + return ret; + + for (i = 0; i < info->clock_num; i++) { + if (!info->clock_rates[i]) + continue; + ret = clk_set_rate(csi->clks[i].clk, info->clock_rates[i]); + if (ret) { + dev_err(csi->dev, "Failed to set %s rate %u\n", info->clocks[i], + info->clock_rates[i]); + return ret; + } + } + + return 0; +} + +static int c3_mipi_csi_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct csi_device *csi; + int ret; + + csi = devm_kzalloc(dev, sizeof(*csi), GFP_KERNEL); + if (!csi) + return -ENOMEM; + + csi->info = of_device_get_match_data(dev); + csi->dev = dev; + + ret = c3_mipi_csi_ioremap_resource(csi); + if (ret) + return dev_err_probe(dev, ret, "Failed to ioremap resource\n"); + + ret = c3_mipi_csi_configure_clocks(csi); + if (ret) + return dev_err_probe(dev, ret, "Failed to configure clocks\n"); + + platform_set_drvdata(pdev, csi); + + pm_runtime_enable(dev); + + ret = c3_mipi_csi_subdev_init(csi); + if (ret) + goto err_disable_runtime_pm; + + ret = c3_mipi_csi_async_register(csi); + if (ret) + goto err_deinit_subdev; + + return 0; + +err_deinit_subdev: + c3_mipi_csi_subdev_deinit(csi); +err_disable_runtime_pm: + pm_runtime_disable(dev); + return ret; +}; + +static void c3_mipi_csi_remove(struct platform_device *pdev) +{ + struct csi_device *csi = platform_get_drvdata(pdev); + + c3_mipi_csi_async_unregister(csi); + c3_mipi_csi_subdev_deinit(csi); + + pm_runtime_disable(&pdev->dev); +}; + +static const struct csi_info c3_mipi_csi_info = { + .clocks = {"vapb", "phy0"}, + .clock_rates = {0, 200000000}, + .clock_num = 2 +}; + +static const struct of_device_id c3_mipi_csi_of_match[] = { + { .compatible = "amlogic,c3-mipi-csi2", + .data = &c3_mipi_csi_info, + }, + { }, +}; +MODULE_DEVICE_TABLE(of, c3_mipi_csi_of_match); + +static struct platform_driver c3_mipi_csi_driver = { + .probe = c3_mipi_csi_probe, + .remove = c3_mipi_csi_remove, + .driver = { + .name = "c3-mipi-csi2", + .of_match_table = c3_mipi_csi_of_match, + .pm = pm_ptr(&c3_mipi_csi_pm_ops), + }, +}; + +module_platform_driver(c3_mipi_csi_driver); + +MODULE_AUTHOR("Keke Li "); +MODULE_DESCRIPTION("Amlogic C3 MIPI CSI-2 receiver"); +MODULE_LICENSE("GPL");