From patchwork Thu Dec 5 09:04:30 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Keke Li via B4 Relay X-Patchwork-Id: 13894882 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3AC4F1D79BB; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733389474; cv=none; b=KI5q+6uZJ3QqSTpMXYgcoJc+5/7X+8cKGUllhcpfiuomRwkjsn6uvk40Pz8DUup09K5brAPHjqUtz93+kDTuP2Br3NQqJ+KM1CIpW6gP96ov8voryQ+dDqK7uYTrwsiMRRLKiKOK0NA556udeVm1Hs7N3303lq+8VBonCeycbjk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733389474; c=relaxed/simple; bh=l+Nu1HUzyoaeNmIiNCeF09JlHj8BmCdvi4fOAXQwi6M=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=ZMj8/0V/d5JgQGuCpfUmgIOfV9SuOnYx7tXyVTL8AKHzGH5aGriO9C7686Jc3O/sprf1eEvwOpge3+GwPV6WORthOwMcpHCzK8CUUB4EIxOcNFXuMfS7zxOJEHfzhRxW/5OHlBCaI+aWtGxbNZZqS/qqjbZThLK7q/8KIawL838= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=qxtKnlbW; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="qxtKnlbW" Received: by smtp.kernel.org (Postfix) with ESMTPS id C72ABC4CEED; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1733389473; bh=l+Nu1HUzyoaeNmIiNCeF09JlHj8BmCdvi4fOAXQwi6M=; h=From:Date:Subject:References:In-Reply-To:To:Cc:Reply-To:From; b=qxtKnlbWsJXNUcMNVKiptZcaLvBFvj9AsfxFnCBzXOjreIKg8rkG0WWVwwCxza8P5 1nzKPDBmpsoEriFU47DvfGjOPkbiSlzfjVvh/1da/HiM0cOHO1+ZGZmltCJYJ0f8ot gg+RP3r/ALRq/0QLbMIsuZvc9peN5vWWhmpwXIq+f9/rl86p5G6VPh4LIoEwbbShU0 vP1lVuaHnRtOgsj22EGPDldzX8yjAS8TANGIov6Jqp4l1wpVeiSvXbUvXmcFOVfZiQ UzscvPMhsHxmFXe5GcqlH1pRWs+hOQNXdCs1m+A/zlcFMEQ0oBNqybjK7HaznfY8t2 Z+Zb2jhQYkAsA== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id BC0ADE7716E; Thu, 5 Dec 2024 09:04:33 +0000 (UTC) From: Keke Li via B4 Relay Date: Thu, 05 Dec 2024 17:04:30 +0800 Subject: [PATCH v4 04/10] media: platform: Add c3 mipi adapter driver Precedence: bulk X-Mailing-List: linux-media@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Message-Id: <20241205-c3isp-v4-4-cb1868be0105@amlogic.com> References: <20241205-c3isp-v4-0-cb1868be0105@amlogic.com> In-Reply-To: <20241205-c3isp-v4-0-cb1868be0105@amlogic.com> To: Mauro Carvalho Chehab , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: linux-media@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, kieran.bingham@ideasonboard.com, laurent.pinchart@ideasonboard.com, dan.scally@ideasonboard.com, Keke Li X-Mailer: b4 0.14.1 X-Developer-Signature: v=1; a=ed25519-sha256; t=1733389471; l=34154; i=keke.li@amlogic.com; s=20240902; h=from:subject:message-id; bh=Ii3eJyedo9YhppXc1ISBqYKGiZ0aK6pYRNLNN4Yakj8=; b=nW5t1+lmaNsQHulAZvdYEpP4mWK3afA1/QSh+kqHUL7ZyR4VNFzzN53+ztUkKWWNmJUZ8XtEO 4qW+nVvCgLoAjlY3JIZ+g/ZzdUw3JnN0wUrYzQZ0JV3oeVA+W4LuliH X-Developer-Key: i=keke.li@amlogic.com; a=ed25519; pk=XxNPTsQ0YqMJLLekV456eoKV5gbSlxnViB1k1DhfRmU= X-Endpoint-Received: by B4 Relay for keke.li@amlogic.com/20240902 with auth_id=204 X-Original-From: Keke Li Reply-To: keke.li@amlogic.com From: Keke Li This driver mainly responsible for organizing MIPI data and sending raw data to ISP pipeline. Reviewed-by: Daniel Scally Signed-off-by: Keke Li --- MAINTAINERS | 7 + drivers/media/platform/amlogic/c3/Kconfig | 1 + drivers/media/platform/amlogic/c3/Makefile | 1 + .../media/platform/amlogic/c3/mipi-adapter/Kconfig | 16 + .../platform/amlogic/c3/mipi-adapter/Makefile | 3 + .../amlogic/c3/mipi-adapter/c3-mipi-adap.c | 892 +++++++++++++++++++++ 6 files changed, 920 insertions(+) diff --git a/MAINTAINERS b/MAINTAINERS index 9b405a694881..0136101bef0d 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1224,6 +1224,13 @@ F: Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml F: drivers/perf/amlogic/ F: include/soc/amlogic/ +AMLOGIC MIPI ADAPTER DRIVER +M: Keke Li +L: linux-media@vger.kernel.org +S: Maintained +F: Documentation/devicetree/bindings/media/amlogic,c3-mipi-adapter.yaml +F: drivers/media/platform/amlogic/c3/mipi-adapter/ + AMLOGIC MIPI CSI2 DRIVER M: Keke Li L: linux-media@vger.kernel.org diff --git a/drivers/media/platform/amlogic/c3/Kconfig b/drivers/media/platform/amlogic/c3/Kconfig index 098d458747b8..a504a1eb22e6 100644 --- a/drivers/media/platform/amlogic/c3/Kconfig +++ b/drivers/media/platform/amlogic/c3/Kconfig @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only +source "drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig" source "drivers/media/platform/amlogic/c3/mipi-csi2/Kconfig" diff --git a/drivers/media/platform/amlogic/c3/Makefile b/drivers/media/platform/amlogic/c3/Makefile index a468fb782f94..770b2a2903ad 100644 --- a/drivers/media/platform/amlogic/c3/Makefile +++ b/drivers/media/platform/amlogic/c3/Makefile @@ -1,3 +1,4 @@ # SPDX-License-Identifier: GPL-2.0-only +obj-y += mipi-adapter/ obj-y += mipi-csi2/ diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig b/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig new file mode 100644 index 000000000000..bf19059b3543 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/Kconfig @@ -0,0 +1,16 @@ +# SPDX-License-Identifier: GPL-2.0-only + +config VIDEO_C3_MIPI_ADAPTER + tristate "Amlogic C3 MIPI adapter" + depends on ARCH_MESON || COMPILE_TEST + depends on VIDEO_DEV + depends on OF + select MEDIA_CONTROLLER + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + help + Video4Linux2 driver for Amlogic C3 MIPI adapter. + C3 MIPI adapter mainly responsible for organizing + MIPI data and sending raw data to ISP pipeline. + + To compile this driver as a module choose m here. diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile b/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile new file mode 100644 index 000000000000..216fc310c5b4 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/Makefile @@ -0,0 +1,3 @@ +# SPDX-License-Identifier: GPL-2.0-only + +obj-$(CONFIG_VIDEO_C3_MIPI_ADAPTER) += c3-mipi-adap.o diff --git a/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c b/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c new file mode 100644 index 000000000000..01557759f211 --- /dev/null +++ b/drivers/media/platform/amlogic/c3/mipi-adapter/c3-mipi-adap.c @@ -0,0 +1,892 @@ +// SPDX-License-Identifier: (GPL-2.0-only OR MIT) +/* + * Copyright (C) 2024 Amlogic, Inc. All rights reserved + */ + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include +#include +#include +#include + +/* + * Adapter Block Diagram + * --------------------- + * + * +--------------------------------------------+ + * | Adapter | + * |--------------------------------------------| + * +------------+ | | | | | +-----+ + * | MIPI CSI-2 |--->| Frontend -> DDR_RD0 -> PIXEL0 -> ALIGNMENT |--->| ISP | + * +------------+ | | | | | +-----+ + * +--------------------------------------------+ + * + */ + +/* C3 adapter submodule definition */ +enum { + SUBMD_TOP, + SUBMD_FD, + SUBMD_RD, +}; + +#define ADAP_SUBMD_MASK GENMASK(17, 16) +#define ADAP_SUBMD_SHIFT 16 +#define ADAP_SUBMD(x) (((x) & (ADAP_SUBMD_MASK)) >> (ADAP_SUBMD_SHIFT)) +#define ADAP_REG_ADDR_MASK GENMASK(15, 0) +#define ADAP_REG_ADDR(x) ((x) & (ADAP_REG_ADDR_MASK)) +#define ADAP_REG_T(x) ((SUBMD_TOP << ADAP_SUBMD_SHIFT) | (x)) +#define ADAP_REG_F(x) ((SUBMD_FD << ADAP_SUBMD_SHIFT) | (x)) +#define ADAP_REG_R(x) ((SUBMD_RD << ADAP_SUBMD_SHIFT) | (x)) + +#define MIPI_ADAP_CLOCK_NUM_MAX 3 +#define MIPI_ADAP_SUBDEV_NAME "c3-mipi-adapter" + +/* C3 MIPI adapter TOP register */ +#define MIPI_ADAPT_DE_CTRL0 ADAP_REG_T(0x40) +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_MASK BIT(3) +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_EN BIT(3) +#define MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_DIS (0 << 3) +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_MASK BIT(7) +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_EN BIT(7) +#define MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_DIS (0 << 7) + +/* C3 MIPI adapter FRONTEND register */ +#define CSI2_CLK_RESET ADAP_REG_F(0x00) +#define CSI2_CLK_RESET_SW_RESET_MASK BIT(0) +#define CSI2_CLK_RESET_SW_RESET_APPLY BIT(0) +#define CSI2_CLK_RESET_SW_RESET_RELEASE (0 << 0) +#define CSI2_CLK_RESET_CLK_ENABLE_MASK BIT(1) +#define CSI2_CLK_RESET_CLK_ENABLE_EN BIT(1) +#define CSI2_CLK_RESET_CLK_ENABLE_DIS (0 << 1) + +#define CSI2_GEN_CTRL0 ADAP_REG_F(0x04) +#define CSI2_GEN_CTRL0_VC0_MASK BIT(0) +#define CSI2_GEN_CTRL0_VC0_EN BIT(0) +#define CSI2_GEN_CTRL0_VC0_DIS (0 << 0) +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_MASK GENMASK(20, 16) +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_RAW BIT(16) +#define CSI2_GEN_CTRL0_ENABLE_PACKETS_YUV (2 << 16) + +#define CSI2_X_START_END_ISP ADAP_REG_F(0x0c) +#define CSI2_X_START_END_ISP_X_START_MASK GENMASK(15, 0) +#define CSI2_X_START_END_ISP_X_START(x) ((x) << 0) +#define CSI2_X_START_END_ISP_X_END_MASK GENMASK(31, 16) +#define CSI2_X_START_END_ISP_X_END(x) (((x) - 1) << 16) + +#define CSI2_Y_START_END_ISP ADAP_REG_F(0x10) +#define CSI2_Y_START_END_ISP_Y_START_MASK GENMASK(15, 0) +#define CSI2_Y_START_END_ISP_Y_START(x) ((x) << 0) +#define CSI2_Y_START_END_ISP_Y_END_MASK GENMASK(31, 16) +#define CSI2_Y_START_END_ISP_Y_END(x) (((x) - 1) << 16) + +#define CSI2_VC_MODE ADAP_REG_F(0x1c) +#define CSI2_VC_MODE_VS_ISP_SEL_VC_MASK GENMASK(19, 16) +#define CSI2_VC_MODE_VS_ISP_SEL_VC_0 BIT(16) +#define CSI2_VC_MODE_VS_ISP_SEL_VC_1 (2 << 16) +#define CSI2_VC_MODE_VS_ISP_SEL_VC_2 (4 << 16) +#define CSI2_VC_MODE_VS_ISP_SEL_VC_3 (8 << 16) +#define CSI2_VC_MODE_HS_ISP_SEL_VC_MASK GENMASK(23, 20) +#define CSI2_VC_MODE_HS_ISP_SEL_VC_0 BIT(20) +#define CSI2_VC_MODE_HS_ISP_SEL_VC_1 (2 << 20) +#define CSI2_VC_MODE_HS_ISP_SEL_VC_2 (4 << 20) +#define CSI2_VC_MODE_HS_ISP_SEL_VC_3 (8 << 20) + +/* C3 MIPI adapter READER register */ +#define MIPI_ADAPT_DDR_RD0_CNTL0 ADAP_REG_R(0x00) +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN_MASK BIT(0) +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN BIT(0) +#define MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_DIS (0 << 0) + +#define MIPI_ADAPT_DDR_RD0_CNTL1 ADAP_REG_R(0x04) +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_MASK GENMASK(31, 30) +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DIRECT_MODE (0 << 30) +#define MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DDR_MODE BIT(30) + +#define MIPI_ADAPT_PIXEL0_CNTL0 ADAP_REG_R(0x80) +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_MASK GENMASK(17, 16) +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DDR_PATH (0 << 16) +#define MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DIRECT_PATH BIT(16) +#define MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE_MASK GENMASK(25, 20) +#define MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE(x) ((x) << 20) +#define MIPI_ADAPT_PIXEL0_CNTL0_START_EN_MASK BIT(31) +#define MIPI_ADAPT_PIXEL0_CNTL0_START_EN BIT(31) + +#define MIPI_ADAPT_ALIG_CNTL0 ADAP_REG_R(0x100) +#define MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM_MASK GENMASK(15, 0) +#define MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM(x) ((x) << 0) +#define MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM_MASK GENMASK(31, 16) +#define MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM(x) ((x) << 16) + +#define MIPI_ADAPT_ALIG_CNTL1 ADAP_REG_R(0x104) +#define MIPI_ADAPT_ALIG_CNTL1_HPE_NUM_MASK GENMASK(31, 16) +#define MIPI_ADAPT_ALIG_CNTL1_HPE_NUM(x) ((x) << 16) + +#define MIPI_ADAPT_ALIG_CNTL2 ADAP_REG_R(0x108) +#define MIPI_ADAPT_ALIG_CNTL2_VPE_NUM_MASK GENMASK(31, 16) +#define MIPI_ADAPT_ALIG_CNTL2_VPE_NUM(x) ((x) << 16) + +#define MIPI_ADAPT_ALIG_CNTL6 ADAP_REG_R(0x118) +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_EN_MASK BIT(0) +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_EN BIT(0) +#define MIPI_ADAPT_ALIG_CNTL6_PATH0_DIS (0 << 0) +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_MASK BIT(4) +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DDR (0 << 4) +#define MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DIRECT BIT(4) +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_EN_MASK BIT(12) +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_EN BIT(12) +#define MIPI_ADAPT_ALIG_CNTL6_DATA0_DIS (0 << 12) + +#define MIPI_ADAPT_ALIG_CNTL8 ADAP_REG_R(0x120) +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_MASK BIT(5) +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_EN BIT(5) +#define MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_DIS (0 << 5) +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_DIS_MASK BIT(12) +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_HOLD (0 << 12) +#define MIPI_ADAPT_ALIG_CNTL8_EXCEED_NOT_HOLD BIT(12) +#define MIPI_ADAPT_ALIG_CNTL8_START_EN_MASK BIT(31) +#define MIPI_ADAPT_ALIG_CNTL8_START_EN BIT(31) + +#define MIPI_ADAP_MAX_WIDTH 2888 +#define MIPI_ADAP_MIN_WIDTH 160 +#define MIPI_ADAP_MAX_HEIGHT 2240 +#define MIPI_ADAP_MIN_HEIGHT 120 +#define MIPI_ADAP_DEFAULT_WIDTH 1920 +#define MIPI_ADAP_DEFAULT_HEIGHT 1080 +#define MIPI_ADAP_DEFAULT_FMT MEDIA_BUS_FMT_SRGGB10_1X10 + +/* C3 MIPI adapter pad list */ +enum { + MIPI_ADAP_PAD_SINK, + MIPI_ADAP_PAD_SRC, + MIPI_ADAP_PAD_MAX +}; + +/* + * struct adap_info - mipi adapter information + * + * @clocks: array of mipi adapter clock names + * @clock_rates: array of mipi adapter clock rate + * @clock_num: actual clock number + */ +struct adap_info { + char *clocks[MIPI_ADAP_CLOCK_NUM_MAX]; + u32 clock_rates[MIPI_ADAP_CLOCK_NUM_MAX]; + u32 clock_num; +}; + +/* + * struct adap_device - mipi adapter platform device + * + * @dev: pointer to the struct device + * @top: mipi adapter top register address + * @fd: mipi adapter frontend register address + * @rd: mipi adapter reader register address + * @clks: array of MIPI adapter clocks + * @sd: mipi adapter sub-device + * @pads: mipi adapter sub-device pads + * @notifier: notifier to register on the v4l2-async API + * @src_sd: source sub-device + * @src_sd_pad: source sub-device pad + * @info: version-specific MIPI adapter information + */ +struct adap_device { + struct device *dev; + void __iomem *top; + void __iomem *fd; + void __iomem *rd; + struct clk_bulk_data clks[MIPI_ADAP_CLOCK_NUM_MAX]; + + struct v4l2_subdev sd; + struct media_pad pads[MIPI_ADAP_PAD_MAX]; + struct v4l2_async_notifier notifier; + struct v4l2_subdev *src_sd; + + u16 src_sd_pad; + const struct adap_info *info; +}; + +/* Format helpers */ + +struct adap_pix_format { + u32 code; + u8 data_type; +}; + +static const struct adap_pix_format c3_mipi_adap_formats[] = { + { MEDIA_BUS_FMT_SBGGR10_1X10, MIPI_CSI2_DT_RAW10 }, + { MEDIA_BUS_FMT_SGBRG10_1X10, MIPI_CSI2_DT_RAW10 }, + { MEDIA_BUS_FMT_SGRBG10_1X10, MIPI_CSI2_DT_RAW10 }, + { MEDIA_BUS_FMT_SRGGB10_1X10, MIPI_CSI2_DT_RAW10 }, + { MEDIA_BUS_FMT_SBGGR12_1X12, MIPI_CSI2_DT_RAW12 }, + { MEDIA_BUS_FMT_SGBRG12_1X12, MIPI_CSI2_DT_RAW12 }, + { MEDIA_BUS_FMT_SGRBG12_1X12, MIPI_CSI2_DT_RAW12 }, + { MEDIA_BUS_FMT_SRGGB12_1X12, MIPI_CSI2_DT_RAW12 }, +}; + +static const struct adap_pix_format +*c3_mipi_adap_find_format(u32 code) +{ + unsigned int i; + + for (i = 0; i < ARRAY_SIZE(c3_mipi_adap_formats); i++) + if (code == c3_mipi_adap_formats[i].code) + return &c3_mipi_adap_formats[i]; + + return NULL; +} + +/* Hardware configuration */ + +static void c3_mipi_adap_update_bits(struct adap_device *adap, u32 reg, + u32 mask, u32 val) +{ + void __iomem *addr; + u32 orig, tmp; + + switch (ADAP_SUBMD(reg)) { + case SUBMD_TOP: + addr = adap->top + ADAP_REG_ADDR(reg); + break; + case SUBMD_FD: + addr = adap->fd + ADAP_REG_ADDR(reg); + break; + case SUBMD_RD: + addr = adap->rd + ADAP_REG_ADDR(reg); + break; + default: + dev_err(adap->dev, "Invalid sub-module: %lu\n", ADAP_SUBMD(reg)); + return; + } + + orig = readl(addr); + tmp = orig & ~mask; + tmp |= val & mask; + + if (tmp != orig) + writel(tmp, addr); +} + +/* Configure adapter top sub module */ +static void c3_mipi_adap_cfg_top(struct adap_device *adap) +{ + /* Bypass decompress */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DE_CTRL0, + MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_MASK, + MIPI_ADAPT_DE_CTRL0_RD_BUS_BYPASS_EN); + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DE_CTRL0, + MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_MASK, + MIPI_ADAPT_DE_CTRL0_WR_BUS_BYPASS_EN); +} + +/* Configure adapter frontend sub module */ +static void c3_mipi_adap_cfg_frontend(struct adap_device *adap, + struct v4l2_mbus_framefmt *fmt) +{ + /* Reset frontend module */ + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET, + CSI2_CLK_RESET_SW_RESET_MASK, CSI2_CLK_RESET_SW_RESET_APPLY); + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET, + CSI2_CLK_RESET_SW_RESET_MASK, CSI2_CLK_RESET_SW_RESET_RELEASE); + c3_mipi_adap_update_bits(adap, CSI2_CLK_RESET, + CSI2_CLK_RESET_CLK_ENABLE_MASK, CSI2_CLK_RESET_CLK_ENABLE_EN); + + c3_mipi_adap_update_bits(adap, CSI2_X_START_END_ISP, CSI2_X_START_END_ISP_X_START_MASK, + CSI2_X_START_END_ISP_X_START(0)); + c3_mipi_adap_update_bits(adap, CSI2_X_START_END_ISP, CSI2_X_START_END_ISP_X_END_MASK, + CSI2_X_START_END_ISP_X_END(fmt->width)); + + c3_mipi_adap_update_bits(adap, CSI2_Y_START_END_ISP, CSI2_Y_START_END_ISP_Y_START_MASK, + CSI2_Y_START_END_ISP_Y_START(0)); + c3_mipi_adap_update_bits(adap, CSI2_Y_START_END_ISP, CSI2_Y_START_END_ISP_Y_END_MASK, + CSI2_Y_START_END_ISP_Y_END(fmt->height)); + + /* Select VS and HS signal for direct path */ + c3_mipi_adap_update_bits(adap, CSI2_VC_MODE, CSI2_VC_MODE_VS_ISP_SEL_VC_MASK, + CSI2_VC_MODE_VS_ISP_SEL_VC_0); + c3_mipi_adap_update_bits(adap, CSI2_VC_MODE, CSI2_VC_MODE_HS_ISP_SEL_VC_MASK, + CSI2_VC_MODE_HS_ISP_SEL_VC_0); + + /* Enable to receive RAW packet */ + c3_mipi_adap_update_bits(adap, CSI2_GEN_CTRL0, CSI2_GEN_CTRL0_ENABLE_PACKETS_MASK, + CSI2_GEN_CTRL0_ENABLE_PACKETS_RAW); + + /* Enable virtual channel 0 */ + c3_mipi_adap_update_bits(adap, CSI2_GEN_CTRL0, + CSI2_GEN_CTRL0_VC0_MASK, CSI2_GEN_CTRL0_VC0_EN); +} + +static void c3_mipi_adap_cfg_rd0(struct adap_device *adap) +{ + /* Select direct mode for DDR_RD0 mode */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DDR_RD0_CNTL1, + MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_MASK, + MIPI_ADAPT_DDR_RD0_CNTL1_PORT_SEL_DIRECT_MODE); + + /* + * Data can't bypass DDR_RD0 in direct mode, + * so need to enable DDR_RD0 module here. + */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_DDR_RD0_CNTL0, + MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN_MASK, + MIPI_ADAPT_DDR_RD0_CNTL0_MODULE_EN); +} + +static void c3_mipi_adap_cfg_pixel0(struct adap_device *adap, + struct v4l2_mbus_framefmt *fmt) +{ + const struct adap_pix_format *pix_fmt; + + pix_fmt = c3_mipi_adap_find_format(fmt->code); + + /* Set work mode and data type for PIXEL0 module */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0, + MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_MASK, + MIPI_ADAPT_PIXEL0_CNTL0_WORK_MODE_RAW_DIRECT_PATH); + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0, + MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE_MASK, + MIPI_ADAPT_PIXEL0_CNTL0_DATA_TYPE(pix_fmt->data_type)); + + /* Start PIXEL0 module */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_PIXEL0_CNTL0, + MIPI_ADAPT_PIXEL0_CNTL0_START_EN_MASK, + MIPI_ADAPT_PIXEL0_CNTL0_START_EN); +} + +static void c3_mipi_adap_cfg_alig(struct adap_device *adap, + struct v4l2_mbus_framefmt *fmt) +{ + /* + * ISP hardware requires the number of horizonal blanks + * greater than 64 cycles, so adding 72 here. + */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL0, + MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM_MASK, + MIPI_ADAPT_ALIG_CNTL0_H_TOTAL_NUM(fmt->width + 72)); + /* + * ISP hardware requires the number of vertical blanks + * greater than 40 lines, so adding 48 here. + */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL0, + MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM_MASK, + MIPI_ADAPT_ALIG_CNTL0_V_TOTAL_NUM(fmt->height + 48)); + + /* End pixel in a line */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL1, + MIPI_ADAPT_ALIG_CNTL1_HPE_NUM_MASK, + MIPI_ADAPT_ALIG_CNTL1_HPE_NUM(fmt->width)); + + /* End line in a frame */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL2, + MIPI_ADAPT_ALIG_CNTL2_VPE_NUM_MASK, + MIPI_ADAPT_ALIG_CNTL2_VPE_NUM(fmt->height)); + + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6, + MIPI_ADAPT_ALIG_CNTL6_PATH0_EN_MASK, + MIPI_ADAPT_ALIG_CNTL6_PATH0_EN); + + /* Select direct mode for ALIG module */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6, + MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_MASK, + MIPI_ADAPT_ALIG_CNTL6_PIX0_DATA_MODE_DIRECT); + + /* Enable to send raw data */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL6, + MIPI_ADAPT_ALIG_CNTL6_DATA0_EN_MASK, + MIPI_ADAPT_ALIG_CNTL6_DATA0_EN); + + /* Set continue mode and disable hold counter */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8, + MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_MASK, + MIPI_ADAPT_ALIG_CNTL8_FRMAE_CONTINUE_EN); + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8, + MIPI_ADAPT_ALIG_CNTL8_EXCEED_DIS_MASK, + MIPI_ADAPT_ALIG_CNTL8_EXCEED_NOT_HOLD); + + /* Start ALIG module */ + c3_mipi_adap_update_bits(adap, MIPI_ADAPT_ALIG_CNTL8, + MIPI_ADAPT_ALIG_CNTL8_START_EN_MASK, + MIPI_ADAPT_ALIG_CNTL8_START_EN); +} + +/* V4L2 subdev operations */ + +static int c3_mipi_adap_enable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + u32 pad, u64 streams_mask) +{ + struct adap_device *adap = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *fmt; + u64 sink_streams; + int ret; + + pm_runtime_resume_and_get(adap->dev); + + fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SINK); + + c3_mipi_adap_cfg_top(adap); + c3_mipi_adap_cfg_frontend(adap, fmt); + c3_mipi_adap_cfg_rd0(adap); + c3_mipi_adap_cfg_pixel0(adap, fmt); + c3_mipi_adap_cfg_alig(adap, fmt); + + sink_streams = v4l2_subdev_state_xlate_streams(state, pad, + MIPI_ADAP_PAD_SINK, + &streams_mask); + ret = v4l2_subdev_enable_streams(adap->src_sd, + adap->src_sd_pad, + sink_streams); + if (ret) { + pm_runtime_put(adap->dev); + return ret; + } + + return 0; +} + +static int c3_mipi_adap_disable_streams(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + u32 pad, u64 streams_mask) +{ + struct adap_device *adap = v4l2_get_subdevdata(sd); + u64 sink_streams; + int ret; + + sink_streams = v4l2_subdev_state_xlate_streams(state, pad, + MIPI_ADAP_PAD_SINK, + &streams_mask); + ret = v4l2_subdev_disable_streams(adap->src_sd, + adap->src_sd_pad, + sink_streams); + if (ret) + dev_err(adap->dev, "Failed to disable %s\n", adap->src_sd->name); + + pm_runtime_put(adap->dev); + + return ret; +} + +static int c3_mipi_adap_cfg_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_krouting *routing) +{ + static const struct v4l2_mbus_framefmt format = { + .width = MIPI_ADAP_DEFAULT_WIDTH, + .height = MIPI_ADAP_DEFAULT_HEIGHT, + .code = MIPI_ADAP_DEFAULT_FMT, + .field = V4L2_FIELD_NONE, + .colorspace = V4L2_COLORSPACE_RAW, + .ycbcr_enc = V4L2_YCBCR_ENC_601, + .quantization = V4L2_QUANTIZATION_LIM_RANGE, + .xfer_func = V4L2_XFER_FUNC_NONE, + }; + int ret; + + ret = v4l2_subdev_routing_validate(sd, routing, + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); + if (ret) + return ret; + + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing, &format); + if (ret) + return ret; + + return 0; +} + +static int c3_mipi_adap_init_routing(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_subdev_route routes; + struct v4l2_subdev_krouting routing; + + routes.sink_pad = MIPI_ADAP_PAD_SINK; + routes.sink_stream = 0; + routes.source_pad = MIPI_ADAP_PAD_SRC; + routes.source_stream = 0; + routes.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE; + + routing.num_routes = 1; + routing.routes = &routes; + + return c3_mipi_adap_cfg_routing(sd, state, &routing); +} + +static int c3_mipi_adap_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_mbus_code_enum *code) +{ + switch (code->pad) { + case MIPI_ADAP_PAD_SINK: + if (code->index >= ARRAY_SIZE(c3_mipi_adap_formats)) + return -EINVAL; + + code->code = c3_mipi_adap_formats[code->index].code; + break; + case MIPI_ADAP_PAD_SRC: + struct v4l2_mbus_framefmt *fmt; + + if (code->index) + return -EINVAL; + + fmt = v4l2_subdev_state_get_format(state, code->pad); + code->code = fmt->code; + break; + default: + return -EINVAL; + } + + return 0; +} + +static int c3_mipi_adap_set_fmt(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state, + struct v4l2_subdev_format *format) +{ + struct v4l2_mbus_framefmt *fmt; + const struct adap_pix_format *pix_format; + + if (format->pad != MIPI_ADAP_PAD_SINK) + return v4l2_subdev_get_fmt(sd, state, format); + + pix_format = c3_mipi_adap_find_format(format->format.code); + if (!pix_format) + pix_format = &c3_mipi_adap_formats[0]; + + fmt = v4l2_subdev_state_get_format(state, format->pad); + fmt->code = pix_format->code; + fmt->width = clamp_t(u32, format->format.width, + MIPI_ADAP_MIN_WIDTH, MIPI_ADAP_MAX_WIDTH); + fmt->height = clamp_t(u32, format->format.height, + MIPI_ADAP_MIN_HEIGHT, MIPI_ADAP_MAX_HEIGHT); + + format->format = *fmt; + + /* Synchronize the format to source pad */ + fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SRC); + *fmt = format->format; + + return 0; +} + +static int c3_mipi_adap_init_state(struct v4l2_subdev *sd, + struct v4l2_subdev_state *state) +{ + struct v4l2_mbus_framefmt *sink_fmt; + struct v4l2_mbus_framefmt *src_fmt; + + sink_fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SINK); + src_fmt = v4l2_subdev_state_get_format(state, MIPI_ADAP_PAD_SRC); + + sink_fmt->width = MIPI_ADAP_DEFAULT_WIDTH; + sink_fmt->height = MIPI_ADAP_DEFAULT_HEIGHT; + sink_fmt->field = V4L2_FIELD_NONE; + sink_fmt->code = MIPI_ADAP_DEFAULT_FMT; + sink_fmt->colorspace = V4L2_COLORSPACE_RAW; + sink_fmt->xfer_func = V4L2_XFER_FUNC_NONE; + sink_fmt->ycbcr_enc = V4L2_YCBCR_ENC_601; + sink_fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; + + *src_fmt = *sink_fmt; + + return c3_mipi_adap_init_routing(sd, state); +} + +static const struct v4l2_subdev_pad_ops c3_mipi_adap_pad_ops = { + .enum_mbus_code = c3_mipi_adap_enum_mbus_code, + .get_fmt = v4l2_subdev_get_fmt, + .set_fmt = c3_mipi_adap_set_fmt, + .enable_streams = c3_mipi_adap_enable_streams, + .disable_streams = c3_mipi_adap_disable_streams, +}; + +static const struct v4l2_subdev_ops c3_mipi_adap_subdev_ops = { + .pad = &c3_mipi_adap_pad_ops, +}; + +static const struct v4l2_subdev_internal_ops c3_mipi_adap_internal_ops = { + .init_state = c3_mipi_adap_init_state, +}; + +/* Media entity operations */ +static const struct media_entity_operations c3_mipi_adap_entity_ops = { + .link_validate = v4l2_subdev_link_validate, +}; + +/* PM runtime */ + +static int c3_mipi_adap_runtime_suspend(struct device *dev) +{ + struct adap_device *adap = dev_get_drvdata(dev); + + clk_bulk_disable_unprepare(adap->info->clock_num, adap->clks); + + return 0; +} + +static int c3_mipi_adap_runtime_resume(struct device *dev) +{ + struct adap_device *adap = dev_get_drvdata(dev); + + return clk_bulk_prepare_enable(adap->info->clock_num, adap->clks); +} + +static const struct dev_pm_ops c3_mipi_adap_pm_ops = { + SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + RUNTIME_PM_OPS(c3_mipi_adap_runtime_suspend, + c3_mipi_adap_runtime_resume, NULL) +}; + +/* Probe/remove & platform driver */ + +static int c3_mipi_adap_subdev_init(struct adap_device *adap) +{ + struct v4l2_subdev *sd = &adap->sd; + int ret; + + v4l2_subdev_init(sd, &c3_mipi_adap_subdev_ops); + sd->owner = THIS_MODULE; + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + sd->internal_ops = &c3_mipi_adap_internal_ops; + snprintf(sd->name, sizeof(sd->name), "%s", MIPI_ADAP_SUBDEV_NAME); + + sd->entity.function = MEDIA_ENT_F_VID_IF_BRIDGE; + sd->entity.ops = &c3_mipi_adap_entity_ops; + + sd->dev = adap->dev; + v4l2_set_subdevdata(sd, adap); + + adap->pads[MIPI_ADAP_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + adap->pads[MIPI_ADAP_PAD_SRC].flags = MEDIA_PAD_FL_SOURCE; + ret = media_entity_pads_init(&sd->entity, MIPI_ADAP_PAD_MAX, adap->pads); + if (ret) + return ret; + + ret = v4l2_subdev_init_finalize(sd); + if (ret) { + media_entity_cleanup(&sd->entity); + return ret; + } + + return 0; +} + +static void c3_mipi_adap_subdev_deinit(struct adap_device *adap) +{ + v4l2_subdev_cleanup(&adap->sd); + media_entity_cleanup(&adap->sd.entity); +} + +/* Subdev notifier register */ +static int c3_mipi_adap_notify_bound(struct v4l2_async_notifier *notifier, + struct v4l2_subdev *sd, + struct v4l2_async_connection *asc) +{ + struct adap_device *adap = v4l2_get_subdevdata(notifier->sd); + struct media_pad *sink = &adap->sd.entity.pads[MIPI_ADAP_PAD_SINK]; + int ret; + + ret = media_entity_get_fwnode_pad(&sd->entity, + sd->fwnode, MEDIA_PAD_FL_SOURCE); + if (ret < 0) { + dev_err(adap->dev, "Failed to find pad for %s\n", sd->name); + return ret; + } + + adap->src_sd = sd; + adap->src_sd_pad = ret; + + return v4l2_create_fwnode_links_to_pad(sd, sink, MEDIA_LNK_FL_ENABLED | + MEDIA_LNK_FL_IMMUTABLE); +} + +static const struct v4l2_async_notifier_operations c3_mipi_adap_notify_ops = { + .bound = c3_mipi_adap_notify_bound, +}; + +static int c3_mipi_adap_async_register(struct adap_device *adap) +{ + struct v4l2_async_connection *asc; + struct fwnode_handle *ep; + int ret; + + v4l2_async_subdev_nf_init(&adap->notifier, &adap->sd); + + ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(adap->dev), 0, 0, + FWNODE_GRAPH_ENDPOINT_NEXT); + if (!ep) + return -ENOTCONN; + + asc = v4l2_async_nf_add_fwnode_remote(&adap->notifier, ep, + struct v4l2_async_connection); + if (IS_ERR(asc)) { + ret = PTR_ERR(asc); + goto err_put_handle; + } + + adap->notifier.ops = &c3_mipi_adap_notify_ops; + ret = v4l2_async_nf_register(&adap->notifier); + if (ret) + goto err_cleanup_nf; + + ret = v4l2_async_register_subdev(&adap->sd); + if (ret) + goto err_unregister_nf; + + fwnode_handle_put(ep); + + return 0; + +err_unregister_nf: + v4l2_async_nf_unregister(&adap->notifier); +err_cleanup_nf: + v4l2_async_nf_cleanup(&adap->notifier); +err_put_handle: + fwnode_handle_put(ep); + return ret; +} + +static void c3_mipi_adap_async_unregister(struct adap_device *adap) +{ + v4l2_async_unregister_subdev(&adap->sd); + v4l2_async_nf_unregister(&adap->notifier); + v4l2_async_nf_cleanup(&adap->notifier); +} + +static int c3_mipi_adap_ioremap_resource(struct adap_device *adap) +{ + struct device *dev = adap->dev; + struct platform_device *pdev = to_platform_device(dev); + + adap->top = devm_platform_ioremap_resource_byname(pdev, "top"); + if (IS_ERR(adap->top)) + return PTR_ERR(adap->top); + + adap->fd = devm_platform_ioremap_resource_byname(pdev, "fd"); + if (IS_ERR(adap->fd)) + return PTR_ERR(adap->fd); + + adap->rd = devm_platform_ioremap_resource_byname(pdev, "rd"); + if (IS_ERR(adap->rd)) + return PTR_ERR(adap->rd); + + return 0; +} + +static int c3_mipi_adap_configure_clocks(struct adap_device *adap) +{ + const struct adap_info *info = adap->info; + int ret; + u32 i; + + for (i = 0; i < info->clock_num; i++) + adap->clks[i].id = info->clocks[i]; + + ret = devm_clk_bulk_get(adap->dev, info->clock_num, adap->clks); + if (ret) + return ret; + + for (i = 0; i < info->clock_num; i++) { + if (!info->clock_rates[i]) + continue; + ret = clk_set_rate(adap->clks[i].clk, info->clock_rates[i]); + if (ret) { + dev_err(adap->dev, "Failed to set %s rate %u\n", info->clocks[i], + info->clock_rates[i]); + return ret; + } + } + + return 0; +} + +static int c3_mipi_adap_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + struct adap_device *adap; + int ret; + + adap = devm_kzalloc(dev, sizeof(*adap), GFP_KERNEL); + if (!adap) + return -ENOMEM; + + adap->info = of_device_get_match_data(dev); + adap->dev = dev; + + ret = c3_mipi_adap_ioremap_resource(adap); + if (ret) + return dev_err_probe(dev, ret, "Failed to ioremap resource\n"); + + ret = c3_mipi_adap_configure_clocks(adap); + if (ret) + return dev_err_probe(dev, ret, "Failed to configure clocks\n"); + + platform_set_drvdata(pdev, adap); + + pm_runtime_enable(dev); + + ret = c3_mipi_adap_subdev_init(adap); + if (ret < 0) + goto err_disable_runtime_pm; + + ret = c3_mipi_adap_async_register(adap); + if (ret < 0) + goto err_deinit_subdev; + + return 0; + +err_deinit_subdev: + c3_mipi_adap_subdev_deinit(adap); +err_disable_runtime_pm: + pm_runtime_disable(dev); + return ret; +}; + +static void c3_mipi_adap_remove(struct platform_device *pdev) +{ + struct adap_device *adap = platform_get_drvdata(pdev); + + c3_mipi_adap_async_unregister(adap); + c3_mipi_adap_subdev_deinit(adap); + + pm_runtime_disable(&pdev->dev); +}; + +static const struct adap_info c3_mipi_adap_info = { + .clocks = {"vapb", "isp0"}, + .clock_rates = {0, 400000000}, + .clock_num = 2 +}; + +static const struct of_device_id c3_mipi_adap_of_match[] = { + { .compatible = "amlogic,c3-mipi-adapter", + .data = &c3_mipi_adap_info }, + { }, +}; +MODULE_DEVICE_TABLE(of, c3_mipi_adap_of_match); + +static struct platform_driver c3_mipi_adap_driver = { + .probe = c3_mipi_adap_probe, + .remove = c3_mipi_adap_remove, + .driver = { + .name = "c3-mipi-adapter", + .of_match_table = c3_mipi_adap_of_match, + .pm = pm_ptr(&c3_mipi_adap_pm_ops), + }, +}; + +module_platform_driver(c3_mipi_adap_driver); + +MODULE_AUTHOR("Keke Li "); +MODULE_DESCRIPTION("Amlogic C3 MIPI adapter"); +MODULE_LICENSE("GPL");