[04/19] media: i2c: ds90ub960: Add error handling to multiple places

Message ID	20250110-ub9xx-improvements-v1-4-e0b9a1f644da@ideasonboard.com (mailing list archive)
State	New
Headers	show Received: from perceval.ideasonboard.com (perceval.ideasonboard.com [213.167.242.64]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 655B220ADC4; Fri, 10 Jan 2025 09:15:17 +0000 (UTC) From: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Date: Fri, 10 Jan 2025 11:14:04 +0200 Subject: [PATCH 04/19] media: i2c: ds90ub960: Add error handling to multiple places Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20250110-ub9xx-improvements-v1-4-e0b9a1f644da@ideasonboard.com> References: <20250110-ub9xx-improvements-v1-0-e0b9a1f644da@ideasonboard.com> In-Reply-To: <20250110-ub9xx-improvements-v1-0-e0b9a1f644da@ideasonboard.com> To: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, Devarsh Thakkar <devarsht@ti.com>, Jai Luthra <jai.luthra@ideasonboard.com>, Sakari Ailus <sakari.ailus@linux.intel.com>, Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Series	media: i2c: ds90ub9xx: Error handling, UB9702 improvements \| expand [00/19] media: i2c: ds90ub9xx: Error handling, UB9702 improvements [01/19] media: i2c: ds90ub953: Fix error prints [02/19] media: i2c: ds90ub913: Align ub913_read() with other similar functions [03/19] media: i2c: ds90ub9xx: Add err parameter to read/write funcs [04/19] media: i2c: ds90ub960: Add error handling to multiple places [05/19] media: i2c: ds90ub953: Add error handling to ub953_log_status() [06/19] media: i2c: ds90ub913: Add error handling to ub913_log_status() [07/19] media: i2c: ds90ub953: Speed-up I2C watchdog timer [08/19] media: i2c: ds90ub960: Move UB9702 registers to a separate section [09/19] media: i2c: ds90ub960: Add UB9702 specific registers [10/19] media: i2c: ds90ub960: Split ub960_init_tx_ports() [11/19] media: i2c: ds90ub960: Refresh ub960_init_tx_ports_ub9702() [12/19] media: i2c: ds90ub960: Add RX port iteration support [13/19] media: i2c: ds90ub960: Move all RX port init code into ub960_init_rx_ports() [14/19] media: i2c: ds90ub960: Remove old ub9702 RX port init code (SQUASH) [15/19] media: i2c: ds90ub960: Update UB9702 init sequences [16/19] media: i2c: ds90ub960: Enable SSCG for UB9702 [17/19] media: dt-bindings: ti,ds90ub960: Add "i2c-addr" link property [18/19] media: i2c: ds90ub960: Configure serializer using back-channel [19/19] media: i2c: ds90ub9xx: Set serializer temperature ramp

diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index 03986a2aaf2c..80bbba0792c1 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -1144,6 +1144,7 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, struct ub960_rxport *rxport = priv->rxports[chan_id]; struct device *dev = &priv->client->dev; unsigned int reg_idx; + int ret = 0; for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { if (!rxport->aliased_clients[reg_idx]) @@ -1158,9 +1159,12 @@ static int ub960_atr_attach_client(struct i2c_atr *atr, u32 chan_id, rxport->aliased_clients[reg_idx] = client; ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ID(reg_idx), - client->addr << 1, NULL); + client->addr << 1, &ret); ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), - alias << 1, NULL); + alias << 1, &ret); + + if (ret) + return ret; dev_dbg(dev, "rx%u: client 0x%02x assigned alias 0x%02x at slot %u\n", rxport->nport, client->addr, alias, reg_idx); @@ -1175,6 +1179,7 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, struct ub960_rxport *rxport = priv->rxports[chan_id]; struct device *dev = &priv->client->dev; unsigned int reg_idx; + int ret; for (reg_idx = 0; reg_idx < ARRAY_SIZE(rxport->aliased_clients); reg_idx++) { if (rxport->aliased_clients[reg_idx] == client) @@ -1189,8 +1194,13 @@ static void ub960_atr_detach_client(struct i2c_atr *atr, u32 chan_id, rxport->aliased_clients[reg_idx] = NULL; - ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), 0, - NULL); + ret = ub960_rxport_write(priv, chan_id, UB960_RR_SLAVE_ALIAS(reg_idx), + 0, NULL); + if (ret) { + dev_err(dev, "rx%u: unable to fully unmap client 0x%02x: %d\n", + rxport->nport, client->addr, ret); + return; + } dev_dbg(dev, "rx%u: client 0x%02x released at slot %u\n", rxport->nport, client->addr, reg_idx); @@ -1285,7 +1295,7 @@ static int ub960_parse_dt_txport(struct ub960_data *priv, return ret; } -static void ub960_csi_handle_events(struct ub960_data *priv, u8 nport) +static int ub960_csi_handle_events(struct ub960_data *priv, u8 nport) { struct device *dev = &priv->client->dev; u8 csi_tx_isr; @@ -1294,13 +1304,15 @@ static void ub960_csi_handle_events(struct ub960_data *priv, u8 nport) ret = ub960_txport_read(priv, nport, UB960_TR_CSI_TX_ISR, &csi_tx_isr, NULL); if (ret) - return; + return ret; if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_SYNC_ERROR) dev_warn(dev, "TX%u: CSI_SYNC_ERROR\n", nport); if (csi_tx_isr & UB960_TR_CSI_TX_ISR_IS_CSI_PASS_ERROR) dev_warn(dev, "TX%u: CSI_PASS_ERROR\n", nport); + + return 0; } /* ----------------------------------------------------------------------------- @@ -1352,28 +1364,38 @@ static void ub960_rxport_disable_vpocs(struct ub960_data *priv) } } -static void ub960_rxport_clear_errors(struct ub960_data *priv, - unsigned int nport) +static int ub960_rxport_clear_errors(struct ub960_data *priv, + unsigned int nport) { + int ret = 0; u8 v; - ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v, NULL); - ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v, NULL); - ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &v, NULL); - ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &v, NULL); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v, &ret); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v, &ret); + ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &v, &ret); + ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &v, &ret); - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v, NULL); - ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v, NULL); + ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v, &ret); + ub960_rxport_read(priv, nport, UB960_RR_RX_PAR_ERR_LO, &v, &ret); - ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v, NULL); + ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v, &ret); + + return ret; } -static void ub960_clear_rx_errors(struct ub960_data *priv) +static int ub960_clear_rx_errors(struct ub960_data *priv) { unsigned int nport; - for (nport = 0; nport < priv->hw_data->num_rxports; nport++) - ub960_rxport_clear_errors(priv, nport); + for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { + int ret; + + ret = ub960_rxport_clear_errors(priv, nport); + if (ret) + return ret; + } + + return 0; } static int ub960_rxport_get_strobe_pos(struct ub960_data *priv, @@ -1383,14 +1405,18 @@ static int ub960_rxport_get_strobe_pos(struct ub960_data *priv, u8 clk_delay, data_delay; int ret; - ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), - UB960_IR_RX_ANA_STROBE_SET_CLK, &v, NULL); + ret = ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_CLK, &v, NULL); + if (ret) + return ret; clk_delay = (v & UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY) ? 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; - ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), - UB960_IR_RX_ANA_STROBE_SET_DATA, &v, NULL); + ret = ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), + UB960_IR_RX_ANA_STROBE_SET_DATA, &v, NULL); + if (ret) + return ret; data_delay = (v & UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY) ? 0 : UB960_MANUAL_STROBE_EXTRA_DELAY; @@ -1412,10 +1438,11 @@ static int ub960_rxport_get_strobe_pos(struct ub960_data *priv, return 0; } -static void ub960_rxport_set_strobe_pos(struct ub960_data *priv, - unsigned int nport, s8 strobe_pos) +static int ub960_rxport_set_strobe_pos(struct ub960_data *priv, + unsigned int nport, s8 strobe_pos) { u8 clk_delay, data_delay; + int ret = 0; clk_delay = UB960_IR_RX_ANA_STROBE_SET_CLK_NO_EXTRA_DELAY; data_delay = UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY; @@ -1430,23 +1457,25 @@ static void ub960_rxport_set_strobe_pos(struct ub960_data *priv, data_delay = strobe_pos | UB960_IR_RX_ANA_STROBE_SET_DATA_NO_EXTRA_DELAY; ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), - UB960_IR_RX_ANA_STROBE_SET_CLK, clk_delay, NULL); + UB960_IR_RX_ANA_STROBE_SET_CLK, clk_delay, &ret); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), - UB960_IR_RX_ANA_STROBE_SET_DATA, data_delay, NULL); + UB960_IR_RX_ANA_STROBE_SET_DATA, data_delay, &ret); + + return ret; } -static void ub960_rxport_set_strobe_range(struct ub960_data *priv, - s8 strobe_min, s8 strobe_max) +static int ub960_rxport_set_strobe_range(struct ub960_data *priv, s8 strobe_min, + s8 strobe_max) { /* Convert the signed strobe pos to positive zero based value */ strobe_min -= UB960_MIN_AEQ_STROBE_POS; strobe_max -= UB960_MIN_AEQ_STROBE_POS; - ub960_write(priv, UB960_XR_SFILTER_CFG, - ((u8)strobe_min << UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) | - ((u8)strobe_max << UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT), - NULL); + return ub960_write(priv, UB960_XR_SFILTER_CFG, + ((u8)strobe_min << UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) | + ((u8)strobe_max << UB960_XR_SFILTER_CFG_SFILTER_MAX_SHIFT), + NULL); } static int ub960_rxport_get_eq_level(struct ub960_data *priv, @@ -1465,11 +1494,12 @@ static int ub960_rxport_get_eq_level(struct ub960_data *priv, return 0; } -static void ub960_rxport_set_eq_level(struct ub960_data *priv, - unsigned int nport, u8 eq_level) +static int ub960_rxport_set_eq_level(struct ub960_data *priv, + unsigned int nport, u8 eq_level) { u8 eq_stage_1_select_value, eq_stage_2_select_value; const unsigned int eq_stage_max = 7; + int ret; u8 v; if (eq_level <= eq_stage_max) { @@ -1480,7 +1510,9 @@ static void ub960_rxport_set_eq_level(struct ub960_data *priv, eq_stage_2_select_value = eq_level - eq_stage_max; } - ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v, NULL); + ret = ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v, NULL); + if (ret) + return ret; v &= ~(UB960_RR_AEQ_BYPASS_EQ_STAGE1_VALUE_MASK | UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_MASK); @@ -1488,68 +1520,102 @@ static void ub960_rxport_set_eq_level(struct ub960_data *priv, v |= eq_stage_2_select_value << UB960_RR_AEQ_BYPASS_EQ_STAGE2_VALUE_SHIFT; v |= UB960_RR_AEQ_BYPASS_ENABLE; - ub960_rxport_write(priv, nport, UB960_RR_AEQ_BYPASS, v, NULL); + ret = ub960_rxport_write(priv, nport, UB960_RR_AEQ_BYPASS, v, NULL); + if (ret) + return ret; + + return 0; } -static void ub960_rxport_set_eq_range(struct ub960_data *priv, - unsigned int nport, u8 eq_min, u8 eq_max) +static int ub960_rxport_set_eq_range(struct ub960_data *priv, + unsigned int nport, u8 eq_min, u8 eq_max) { + int ret = 0; + ub960_rxport_write(priv, nport, UB960_RR_AEQ_MIN_MAX, (eq_min << UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) | (eq_max << UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT), - NULL); + &ret); /* Enable AEQ min setting */ ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_CTL2, UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR, - UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR, NULL); + UB960_RR_AEQ_CTL2_SET_AEQ_FLOOR, &ret); + + return ret; } -static void ub960_rxport_config_eq(struct ub960_data *priv, unsigned int nport) +static int ub960_rxport_config_eq(struct ub960_data *priv, unsigned int nport) { struct ub960_rxport *rxport = priv->rxports[nport]; + int ret; /* We also set common settings here. Should be moved elsewhere. */ if (priv->strobe.manual) { /* Disable AEQ_SFILTER_EN */ - ub960_update_bits(priv, UB960_XR_AEQ_CTL1, - UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN, 0, NULL); + ret = ub960_update_bits(priv, UB960_XR_AEQ_CTL1, + UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN, 0, + NULL); + if (ret) + return ret; } else { /* Enable SFILTER and error control */ - ub960_write(priv, UB960_XR_AEQ_CTL1, - UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_MASK | - UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN, NULL); + ret = ub960_write(priv, UB960_XR_AEQ_CTL1, + UB960_XR_AEQ_CTL1_AEQ_ERR_CTL_MASK | + UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN, + NULL); + + if (ret) + return ret; /* Set AEQ strobe range */ - ub960_rxport_set_strobe_range(priv, priv->strobe.min, - priv->strobe.max); + ret = ub960_rxport_set_strobe_range(priv, priv->strobe.min, + priv->strobe.max); + if (ret) + return ret; } /* The rest are port specific */ if (priv->strobe.manual) - ub960_rxport_set_strobe_pos(priv, nport, rxport->eq.strobe_pos); + ret = ub960_rxport_set_strobe_pos(priv, nport, + rxport->eq.strobe_pos); else - ub960_rxport_set_strobe_pos(priv, nport, 0); + ret = ub960_rxport_set_strobe_pos(priv, nport, 0); + + if (ret) + return ret; if (rxport->eq.manual_eq) { - ub960_rxport_set_eq_level(priv, nport, - rxport->eq.manual.eq_level); + ret = ub960_rxport_set_eq_level(priv, nport, + rxport->eq.manual.eq_level); + if (ret) + return ret; /* Enable AEQ Bypass */ - ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, - UB960_RR_AEQ_BYPASS_ENABLE, - UB960_RR_AEQ_BYPASS_ENABLE, NULL); + ret = ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, + UB960_RR_AEQ_BYPASS_ENABLE, + UB960_RR_AEQ_BYPASS_ENABLE, + NULL); + if (ret) + return ret; } else { - ub960_rxport_set_eq_range(priv, nport, - rxport->eq.aeq.eq_level_min, - rxport->eq.aeq.eq_level_max); + ret = ub960_rxport_set_eq_range(priv, nport, + rxport->eq.aeq.eq_level_min, + rxport->eq.aeq.eq_level_max); + if (ret) + return ret; /* Disable AEQ Bypass */ - ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, - UB960_RR_AEQ_BYPASS_ENABLE, 0, NULL); + ret = ub960_rxport_update_bits(priv, nport, UB960_RR_AEQ_BYPASS, + UB960_RR_AEQ_BYPASS_ENABLE, 0, + NULL); + if (ret) + return ret; } + + return 0; } static int ub960_rxport_link_ok(struct ub960_data *priv, unsigned int nport, @@ -1697,8 +1763,11 @@ static int ub960_rxport_wait_locks(struct ub960_data *priv, continue; } - ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v, - NULL); + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, + &v, NULL); + + if (ret) + return ret; if (priv->hw_data->is_ub9702) { dev_dbg(dev, "\trx%u: locked, freq %llu Hz\n", @@ -1867,8 +1936,8 @@ static void ub960_rxport_remove_serializers(struct ub960_data *priv) } } -static void ub960_init_tx_port(struct ub960_data *priv, - struct ub960_txport *txport) +static int ub960_init_tx_port(struct ub960_data *priv, + struct ub960_txport *txport) { unsigned int nport = txport->nport; u8 csi_ctl = 0; @@ -1885,7 +1954,7 @@ static void ub960_init_tx_port(struct ub960_data *priv, if (!txport->non_continous_clk) csi_ctl |= UB960_TR_CSI_CTL_CSI_CONTS_CLOCK; - ub960_txport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl, NULL); + return ub960_txport_write(priv, nport, UB960_TR_CSI_CTL, csi_ctl, NULL); } static int ub960_init_tx_ports(struct ub960_data *priv) @@ -1893,6 +1962,7 @@ static int ub960_init_tx_ports(struct ub960_data *priv) unsigned int nport; u8 speed_select; u8 pll_div; + int ret = 0; /* TX ports */ @@ -1916,51 +1986,57 @@ static int ub960_init_tx_ports(struct ub960_data *priv) break; } - ub960_write(priv, UB960_SR_CSI_PLL_CTL, speed_select, NULL); + ub960_write(priv, UB960_SR_CSI_PLL_CTL, speed_select, &ret); if (priv->hw_data->is_ub9702) { - ub960_write(priv, UB960_SR_CSI_PLL_DIV, pll_div, NULL); + ub960_write(priv, UB960_SR_CSI_PLL_DIV, pll_div, &ret); switch (priv->tx_data_rate) { case MHZ(1600): default: ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, - 0x80, NULL); + 0x80, &ret); ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, - 0x2a, NULL); + 0x2a, &ret); break; case MHZ(800): ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, - 0x90, NULL); + 0x90, &ret); ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4f, - 0x2a, NULL); + 0x2a, &ret); ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x4b, - 0x2a, NULL); + 0x2a, &ret); break; case MHZ(400): ub960_write_ind(priv, UB960_IND_TARGET_CSI_ANA, 0x92, - 0xa0, NULL); + 0xa0, &ret); break; } } + if (ret) + return ret; + for (nport = 0; nport < priv->hw_data->num_txports; nport++) { struct ub960_txport *txport = priv->txports[nport]; if (!txport) continue; - ub960_init_tx_port(priv, txport); + ret = ub960_init_tx_port(priv, txport); + if (ret) + return ret; } return 0; } -static void ub960_init_rx_port_ub960(struct ub960_data *priv, - struct ub960_rxport *rxport) +static int ub960_init_rx_port_ub960(struct ub960_data *priv, + struct ub960_rxport *rxport) { unsigned int nport = rxport->nport; u32 bc_freq_val; + int ret = 0; /* * Back channel frequency select. @@ -1989,19 +2065,19 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, break; default: - return; + return -EINVAL; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, UB960_RR_BCC_CONFIG_BC_FREQ_SEL_MASK, - bc_freq_val, NULL); + bc_freq_val, &ret); switch (rxport->rx_mode) { case RXPORT_MODE_RAW10: /* FPD3_MODE = RAW10 Mode (DS90UB913A-Q1 / DS90UB933-Q1 compatible) */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, UB960_RR_PORT_CONFIG_FPD3_MODE_MASK, - 0x3, NULL); + 0x3, &ret); /* * RAW10_8BIT_CTL = 0b10 : 8-bit processing using upper 8 bits @@ -2009,55 +2085,58 @@ static void ub960_init_rx_port_ub960(struct ub960_data *priv, ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_MASK, 0x2 << UB960_RR_PORT_CONFIG2_RAW10_8BIT_CTL_SHIFT, - NULL); + &ret); break; case RXPORT_MODE_RAW12_HF: case RXPORT_MODE_RAW12_LF: /* Not implemented */ - return; + return -EINVAL; case RXPORT_MODE_CSI2_SYNC: case RXPORT_MODE_CSI2_NONSYNC: /* CSI-2 Mode (DS90UB953-Q1 compatible) */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG, 0x3, - 0x0, NULL); + 0x0, &ret); break; } /* LV_POLARITY & FV_POLARITY */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, - rxport->lv_fv_pol, NULL); + rxport->lv_fv_pol, &ret); /* Enable all interrupt sources from this port */ - ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07, NULL); - ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f, NULL); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07, &ret); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f, &ret); /* Enable I2C_PASS_THROUGH */ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, - UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, NULL); + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, &ret); /* Enable I2C communication to the serializer via the alias addr */ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, - rxport->ser.alias << 1, NULL); + rxport->ser.alias << 1, &ret); /* Configure EQ related settings */ ub960_rxport_config_eq(priv, nport); /* Enable RX port */ ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport), - NULL); + &ret); + + return ret; } -static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, - struct ub960_rxport *rxport) +static int ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, + struct ub960_rxport *rxport) { unsigned int nport = rxport->nport; u8 bc_freq_val; u8 fpd_func_mode; + int ret = 0; switch (rxport->rx_mode) { case RXPORT_MODE_RAW10: @@ -2086,90 +2165,96 @@ static void ub960_init_rx_port_ub9702_fpd3(struct ub960_data *priv, break; default: - return; + return -EINVAL; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, - bc_freq_val, NULL); + bc_freq_val, &ret); ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, fpd_func_mode, - NULL); + &ret); /* set serdes_eq_mode = 1 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa8, 0x80, - NULL); + &ret); /* enable serdes driver */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x0d, 0x7f, - NULL); + &ret); /* set serdes_eq_offset=4 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04, - NULL); + &ret); /* init default serdes_eq_max in 0xa9 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xa9, 0x23, - NULL); + &ret); /* init serdes_eq_min in 0xaa */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xaa, 0, NULL); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xaa, 0, &ret); /* serdes_driver_ctl2 control: DS90UB953-Q1/DS90UB933-Q1/DS90UB913A-Q1 */ ub960_ind_update_bits(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, - BIT(3), BIT(3), NULL); + BIT(3), BIT(3), &ret); /* RX port to half-rate */ ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2), - BIT(nport * 2), NULL); + BIT(nport * 2), &ret); + + return ret; } -static void ub960_init_rx_port_ub9702_fpd4_aeq(struct ub960_data *priv, - struct ub960_rxport *rxport) +static int ub960_init_rx_port_ub9702_fpd4_aeq(struct ub960_data *priv, + struct ub960_rxport *rxport) { unsigned int nport = rxport->nport; bool first_time_power_up = true; + int ret = 0; if (first_time_power_up) { u8 v; /* AEQ init */ ub960_read_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2c, &v, - NULL); + &ret); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, v, - NULL); + &ret); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, - v + 1, NULL); + v + 1, &ret); ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, - 0x00, NULL); + 0x00, &ret); } /* enable serdes_eq_ctl2 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x9e, 0x00, - NULL); + &ret); /* enable serdes_eq_ctl1 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x90, 0x40, - NULL); + &ret); /* enable serdes_eq_en */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2e, 0x40, - NULL); + &ret); /* disable serdes_eq_override */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0xf0, 0x00, - NULL); + &ret); /* disable serdes_gain_override */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x71, 0x00, - NULL); + &ret); + + return ret; } -static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, - struct ub960_rxport *rxport) +static int ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, + struct ub960_rxport *rxport) { unsigned int nport = rxport->nport; u8 bc_freq_val; + int ret = 0; switch (rxport->rx_mode) { case RXPORT_MODE_RAW10: @@ -2193,55 +2278,66 @@ static void ub960_init_rx_port_ub9702_fpd4(struct ub960_data *priv, break; default: - return; + return -EINVAL; } ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, 0x7, - bc_freq_val, NULL); + bc_freq_val, &ret); /* FPD4 Sync Mode */ - ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, 0, NULL); + ub960_rxport_write(priv, nport, UB960_RR_CHANNEL_MODE, 0, &ret); /* add serdes_eq_offset of 4 */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x2b, 0x04, - NULL); + &ret); /* FPD4 serdes_start_eq in 0x27: assign default */ - ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, 0x0, NULL); + ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x27, 0x0, &ret); /* FPD4 serdes_end_eq in 0x28: assign default */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x28, 0x23, - NULL); + &ret); /* set serdes_driver_mode into FPD IV mode */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x04, 0x00, - NULL); + &ret); /* set FPD PBC drv into FPD IV mode */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x1b, 0x00, - NULL); + &ret); /* set serdes_system_init to 0x2f */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x21, 0x2f, - NULL); + &ret); /* set serdes_system_rst in reset mode */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, 0xc1, - NULL); + &ret); /* RX port to 7.55G mode */ ub960_update_bits(priv, UB960_SR_FPD_RATE_CFG, 0x3 << (nport * 2), - 0 << (nport * 2), NULL); + 0 << (nport * 2), &ret); + + if (ret) + return ret; - ub960_init_rx_port_ub9702_fpd4_aeq(priv, rxport); + ret = ub960_init_rx_port_ub9702_fpd4_aeq(priv, rxport); + if (ret) + return ret; + + return 0; } -static void ub960_init_rx_port_ub9702(struct ub960_data *priv, - struct ub960_rxport *rxport) +static int ub960_init_rx_port_ub9702(struct ub960_data *priv, + struct ub960_rxport *rxport) { unsigned int nport = rxport->nport; + int ret; if (rxport->cdr_mode == RXPORT_CDR_FPD3) - ub960_init_rx_port_ub9702_fpd3(priv, rxport); + ret = ub960_init_rx_port_ub9702_fpd3(priv, rxport); else /* RXPORT_CDR_FPD4 */ - ub960_init_rx_port_ub9702_fpd4(priv, rxport); + ret = ub960_init_rx_port_ub9702_fpd4(priv, rxport); + + if (ret) + return ret; switch (rxport->rx_mode) { case RXPORT_MODE_RAW10: @@ -2250,14 +2346,14 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv, * 0b10 : 8-bit processing using upper 8 bits */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, - 0x3 << 6, 0x2 << 6, NULL); + 0x3 << 6, 0x2 << 6, &ret); break; case RXPORT_MODE_RAW12_HF: case RXPORT_MODE_RAW12_LF: /* Not implemented */ - return; + return -EINVAL; case RXPORT_MODE_CSI2_SYNC: case RXPORT_MODE_CSI2_NONSYNC: @@ -2267,30 +2363,32 @@ static void ub960_init_rx_port_ub9702(struct ub960_data *priv, /* LV_POLARITY & FV_POLARITY */ ub960_rxport_update_bits(priv, nport, UB960_RR_PORT_CONFIG2, 0x3, - rxport->lv_fv_pol, NULL); + rxport->lv_fv_pol, &ret); /* Enable all interrupt sources from this port */ - ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07, NULL); - ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f, NULL); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_HI, 0x07, &ret); + ub960_rxport_write(priv, nport, UB960_RR_PORT_ICR_LO, 0x7f, &ret); /* Enable I2C_PASS_THROUGH */ ub960_rxport_update_bits(priv, nport, UB960_RR_BCC_CONFIG, UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, - UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, NULL); + UB960_RR_BCC_CONFIG_I2C_PASS_THROUGH, &ret); /* Enable I2C communication to the serializer via the alias addr */ ub960_rxport_write(priv, nport, UB960_RR_SER_ALIAS_ID, - rxport->ser.alias << 1, NULL); + rxport->ser.alias << 1, &ret); /* Enable RX port */ ub960_update_bits(priv, UB960_SR_RX_PORT_CTL, BIT(nport), BIT(nport), - NULL); + &ret); if (rxport->cdr_mode == RXPORT_CDR_FPD4) { /* unreset 960 AEQ */ ub960_write_ind(priv, UB960_IND_TARGET_RX_ANA(nport), 0x25, - 0x41, NULL); + 0x41, &ret); } + + return ret; } static int ub960_init_rx_ports(struct ub960_data *priv) @@ -2299,20 +2397,24 @@ static int ub960_init_rx_ports(struct ub960_data *priv) for (nport = 0; nport < priv->hw_data->num_rxports; nport++) { struct ub960_rxport *rxport = priv->rxports[nport]; + int ret; if (!rxport) continue; if (priv->hw_data->is_ub9702) - ub960_init_rx_port_ub9702(priv, rxport); + ret = ub960_init_rx_port_ub9702(priv, rxport); else - ub960_init_rx_port_ub960(priv, rxport); + ret = ub960_init_rx_port_ub960(priv, rxport); + + if (ret) + return ret; } return 0; } -static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) +static int ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) { struct device *dev = &priv->client->dev; u8 rx_port_sts1; @@ -2322,21 +2424,15 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) int ret = 0; /* Read interrupts (also clears most of them) */ - if (!ret) - ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, - &rx_port_sts1, NULL); - if (!ret) - ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, - &rx_port_sts2, NULL); - if (!ret) - ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, - &csi_rx_sts, NULL); - if (!ret) - ret = ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, - &bcc_sts, NULL); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &rx_port_sts1, + &ret); + ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &rx_port_sts2, + &ret); + ub960_rxport_read(priv, nport, UB960_RR_CSI_RX_STS, &csi_rx_sts, &ret); + ub960_rxport_read(priv, nport, UB960_RR_BCC_STATUS, &bcc_sts, &ret); if (ret) - return; + return ret; if (rx_port_sts1 & UB960_RR_RX_PORT_STS1_PARITY_ERROR) { u16 v; @@ -2431,6 +2527,8 @@ static void ub960_rxport_handle_events(struct ub960_data *priv, u8 nport) "stable freq" : "unstable freq"); } + + return 0; } /* ----------------------------------------------------------------------------- @@ -2486,14 +2584,14 @@ static int ub960_enable_tx_port(struct ub960_data *priv, unsigned int nport) UB960_TR_CSI_CTL_CSI_ENABLE, NULL); } -static void ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport) +static int ub960_disable_tx_port(struct ub960_data *priv, unsigned int nport) { struct device *dev = &priv->client->dev; dev_dbg(dev, "disable TX port %u\n", nport); - ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, - UB960_TR_CSI_CTL_CSI_ENABLE, 0, NULL); + return ub960_txport_update_bits(priv, nport, UB960_TR_CSI_CTL, + UB960_TR_CSI_CTL_CSI_ENABLE, 0, NULL); } static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport) @@ -2507,16 +2605,16 @@ static int ub960_enable_rx_port(struct ub960_data *priv, unsigned int nport) UB960_SR_FWD_CTL1_PORT_DIS(nport), 0, NULL); } -static void ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport) +static int ub960_disable_rx_port(struct ub960_data *priv, unsigned int nport) { struct device *dev = &priv->client->dev; dev_dbg(dev, "disable RX port %u\n", nport); /* Disable forwarding */ - ub960_update_bits(priv, UB960_SR_FWD_CTL1, - UB960_SR_FWD_CTL1_PORT_DIS(nport), - UB960_SR_FWD_CTL1_PORT_DIS(nport), NULL); + return ub960_update_bits(priv, UB960_SR_FWD_CTL1, + UB960_SR_FWD_CTL1_PORT_DIS(nport), + UB960_SR_FWD_CTL1_PORT_DIS(nport), NULL); } /* @@ -2658,12 +2756,12 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, case RXPORT_MODE_RAW10: ub960_rxport_write(priv, nport, UB960_RR_RAW10_ID, rx_data[nport].pixel_dt | (vc << UB960_RR_RAW10_ID_VC_SHIFT), - NULL); + &ret); ub960_rxport_write(priv, rxport->nport, UB960_RR_RAW_EMBED_DTYPE, (rx_data[nport].meta_lines << UB960_RR_RAW_EMBED_DTYPE_LINES_SHIFT) | - rx_data[nport].meta_dt, NULL); + rx_data[nport].meta_dt, &ret); break; @@ -2681,7 +2779,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, (vc << UB960_RR_CSI_VC_MAP_SHIFT(2)) | (vc << UB960_RR_CSI_VC_MAP_SHIFT(1)) | (vc << UB960_RR_CSI_VC_MAP_SHIFT(0)), - NULL); + &ret); } else { unsigned int i; @@ -2690,7 +2788,7 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, ub960_rxport_write(priv, nport, UB960_RR_VC_ID_MAP(i), (nport << 4) | nport, - NULL); + &ret); } break; @@ -2702,9 +2800,9 @@ static int ub960_configure_ports_for_streaming(struct ub960_data *priv, fwd_ctl &= ~BIT(nport); /* forward to TX0 */ } - ub960_write(priv, UB960_SR_FWD_CTL1, fwd_ctl, NULL); + ub960_write(priv, UB960_SR_FWD_CTL1, fwd_ctl, &ret); - return 0; + return ret; } static void ub960_update_streaming_status(struct ub960_data *priv) @@ -3107,8 +3205,8 @@ static const struct v4l2_subdev_pad_ops ub960_pad_ops = { .set_fmt = ub960_set_fmt, }; -static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, - unsigned int nport) +static int ub960_log_status_ub960_sp_eq(struct ub960_data *priv, + unsigned int nport) { struct device *dev = &priv->client->dev; u8 eq_level; @@ -3120,7 +3218,7 @@ static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, ret = ub960_read(priv, UB960_XR_AEQ_CTL1, &v, NULL); if (ret) - return; + return ret; dev_info(dev, "\t%s strobe\n", (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) ? "Adaptive" : @@ -3129,7 +3227,7 @@ static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, if (v & UB960_XR_AEQ_CTL1_AEQ_SFILTER_EN) { ret = ub960_read(priv, UB960_XR_SFILTER_CFG, &v, NULL); if (ret) - return; + return ret; dev_info(dev, "\tStrobe range [%d, %d]\n", ((v >> UB960_XR_SFILTER_CFG_SFILTER_MIN_SHIFT) & 0xf) - 7, @@ -3138,7 +3236,7 @@ static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, ret = ub960_rxport_get_strobe_pos(priv, nport, &strobe_pos); if (ret) - return; + return ret; dev_info(dev, "\tStrobe pos %d\n", strobe_pos); @@ -3146,7 +3244,7 @@ static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, ret = ub960_rxport_read(priv, nport, UB960_RR_AEQ_BYPASS, &v, NULL); if (ret) - return; + return ret; dev_info(dev, "\t%s EQ\n", (v & UB960_RR_AEQ_BYPASS_ENABLE) ? "Manual" : @@ -3156,15 +3254,20 @@ static void ub960_log_status_ub960_sp_eq(struct ub960_data *priv, ret = ub960_rxport_read(priv, nport, UB960_RR_AEQ_MIN_MAX, &v, NULL); if (ret) - return; + return ret; dev_info(dev, "\tEQ range [%u, %u]\n", (v >> UB960_RR_AEQ_MIN_MAX_AEQ_FLOOR_SHIFT) & 0xf, (v >> UB960_RR_AEQ_MIN_MAX_AEQ_MAX_SHIFT) & 0xf); } - if (ub960_rxport_get_eq_level(priv, nport, &eq_level) == 0) - dev_info(dev, "\tEQ level %u\n", eq_level); + ret = ub960_rxport_get_eq_level(priv, nport, &eq_level); + if (ret) + return ret; + + dev_info(dev, "\tEQ level %u\n", eq_level); + + return 0; } static int ub960_log_status(struct v4l2_subdev *sd) @@ -3176,11 +3279,15 @@ static int ub960_log_status(struct v4l2_subdev *sd) u16 v16 = 0; u8 v = 0; u8 id[UB960_SR_FPD3_RX_ID_LEN]; + int ret = 0; state = v4l2_subdev_lock_and_get_active_state(sd); - for (unsigned int i = 0; i < sizeof(id); i++) - ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i], NULL); + for (unsigned int i = 0; i < sizeof(id); i++) { + ret = ub960_read(priv, UB960_SR_FPD3_RX_ID(i), &id[i], NULL); + if (ret) + return ret; + } dev_info(dev, "ID '%.*s'\n", (int)sizeof(id), id); @@ -3194,24 +3301,39 @@ static int ub960_log_status(struct v4l2_subdev *sd) continue; } - ub960_txport_read(priv, nport, UB960_TR_CSI_STS, &v, NULL); + ret = ub960_txport_read(priv, nport, UB960_TR_CSI_STS, &v, NULL); + if (ret) + return ret; + dev_info(dev, "\tsync %u, pass %u\n", v & (u8)BIT(1), v & (u8)BIT(0)); - ub960_read16(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), &v16, - NULL); + ret = ub960_read16(priv, UB960_SR_CSI_FRAME_COUNT_HI(nport), + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tframe counter %u\n", v16); - ub960_read16(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), - &v16, NULL); + ret = ub960_read16(priv, UB960_SR_CSI_FRAME_ERR_COUNT_HI(nport), + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tframe error counter %u\n", v16); - ub960_read16(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), &v16, - NULL); + ret = ub960_read16(priv, UB960_SR_CSI_LINE_COUNT_HI(nport), + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tline counter %u\n", v16); - ub960_read16(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), - &v16, NULL); + ret = ub960_read16(priv, UB960_SR_CSI_LINE_ERR_COUNT_HI(nport), + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tline error counter %u\n", v16); } @@ -3225,8 +3347,10 @@ static int ub960_log_status(struct v4l2_subdev *sd) continue; } - ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v, - NULL); + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS1, &v, + NULL); + if (ret) + return ret; if (v & UB960_RR_RX_PORT_STS1_LOCK_STS) dev_info(dev, "\tLocked\n"); @@ -3234,32 +3358,53 @@ static int ub960_log_status(struct v4l2_subdev *sd) dev_info(dev, "\tNot locked\n"); dev_info(dev, "\trx_port_sts1 %#02x\n", v); - ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v, - NULL); + ret = ub960_rxport_read(priv, nport, UB960_RR_RX_PORT_STS2, &v, + NULL); + if (ret) + return ret; + dev_info(dev, "\trx_port_sts2 %#02x\n", v); - ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, &v16, - NULL); + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_FREQ_HIGH, + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tlink freq %llu Hz\n", ((u64)v16 * HZ_PER_MHZ) >> 8); - ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, &v16, - NULL); + ret = ub960_rxport_read16(priv, nport, UB960_RR_RX_PAR_ERR_HI, + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tparity errors %u\n", v16); - ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, &v16, - NULL); + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_COUNT_HI, + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tlines per frame %u\n", v16); - ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, &v16, - NULL); + ret = ub960_rxport_read16(priv, nport, UB960_RR_LINE_LEN_1, + &v16, NULL); + if (ret) + return ret; + dev_info(dev, "\tbytes per line %u\n", v16); - ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, &v, - NULL); + ret = ub960_rxport_read(priv, nport, UB960_RR_CSI_ERR_COUNTER, + &v, NULL); + if (ret) + return ret; + dev_info(dev, "\tcsi_err_counter %u\n", v); - if (!priv->hw_data->is_ub9702) - ub960_log_status_ub960_sp_eq(priv, nport); + if (!priv->hw_data->is_ub9702) { + ret = ub960_log_status_ub960_sp_eq(priv, nport); + if (ret) + return ret; + } /* GPIOs */ for (unsigned int i = 0; i < UB960_NUM_BC_GPIOS; i++) { @@ -3269,7 +3414,9 @@ static int ub960_log_status(struct v4l2_subdev *sd) ctl_reg = UB960_RR_BC_GPIO_CTL(i / 2); ctl_shift = (i % 2) * 4; - ub960_rxport_read(priv, nport, ctl_reg, &v, NULL); + ret = ub960_rxport_read(priv, nport, ctl_reg, &v, NULL); + if (ret) + return ret; dev_info(dev, "\tGPIO%u: mode %u\n", i, (v >> ctl_shift) & 0xf); @@ -3325,16 +3472,22 @@ static irqreturn_t ub960_handle_events(int irq, void *arg) dev_dbg(&priv->client->dev, "FWD_STS %#02x\n", fwd_sts); for (i = 0; i < priv->hw_data->num_txports; i++) { - if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i)) - ub960_csi_handle_events(priv, i); + if (int_sts & UB960_SR_INTERRUPT_STS_IS_CSI_TX(i)) { + ret = ub960_csi_handle_events(priv, i); + if (ret) + return IRQ_NONE; + } } for (i = 0; i < priv->hw_data->num_rxports; i++) { if (!priv->rxports[i]) continue; - if (int_sts & UB960_SR_INTERRUPT_STS_IS_RX(i)) - ub960_rxport_handle_events(priv, i); + if (int_sts & UB960_SR_INTERRUPT_STS_IS_RX(i)) { + ret = ub960_rxport_handle_events(priv, i); + if (ret) + return IRQ_NONE; + } } return IRQ_HANDLED; @@ -3938,7 +4091,7 @@ static const struct regmap_config ub960_regmap_config = { .disable_locking = true, }; -static void ub960_reset(struct ub960_data *priv, bool reset_regs) +static int ub960_reset(struct ub960_data *priv, bool reset_regs) { struct device *dev = &priv->client->dev; unsigned int v; @@ -3948,7 +4101,9 @@ static void ub960_reset(struct ub960_data *priv, bool reset_regs) bit = reset_regs ? UB960_SR_RESET_DIGITAL_RESET1 : UB960_SR_RESET_DIGITAL_RESET0; - ub960_write(priv, UB960_SR_RESET, bit, NULL); + ret = ub960_write(priv, UB960_SR_RESET, bit, NULL); + if (ret) + return ret; mutex_lock(&priv->reg_lock); @@ -3959,6 +4114,8 @@ static void ub960_reset(struct ub960_data *priv, bool reset_regs) if (ret) dev_err(dev, "reset failed: %d\n", ret); + + return ret; } static int ub960_get_hw_resources(struct ub960_data *priv) @@ -4017,7 +4174,9 @@ static int ub960_enable_core_hw(struct ub960_data *priv) fsleep(2000); } - ub960_reset(priv, true); + ret = ub960_reset(priv, true); + if (ret) + goto err_pd_gpio; /* Runtime check register accessibility */ ret = ub960_read(priv, UB960_SR_REV_MASK, &rev_mask, NULL); @@ -4132,7 +4291,9 @@ static int ub960_probe(struct i2c_client *client) if (ret) goto err_disable_vpocs; - ub960_reset(priv, false); + ret = ub960_reset(priv, false); + if (ret) + goto err_disable_vpocs; port_mask = 0; @@ -4159,7 +4320,9 @@ static int ub960_probe(struct i2c_client *client) * Clear any errors caused by switching the RX port settings while * probing. */ - ub960_clear_rx_errors(priv); + ret = ub960_clear_rx_errors(priv); + if (ret) + goto err_disable_vpocs; ret = ub960_init_atr(priv); if (ret)

[04/19] media: i2c: ds90ub960: Add error handling to multiple places

Commit Message

Patch