new file mode 100644
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx-capture-subsystem.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX Media Video Device
+
+description:
+ This is the media controller node for video capture support. It is a
+ virtual device that lists the camera serial interface nodes that the
+ media device will control
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx-capture-subsystem
+
+ ports:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ description:
+ Should contain a list of phandles pointing to camera
+ sensor interface ports of IPU devices.
+
+required:
+ - compatible
+
+additionalProperties: false
+
+examples:
+ - |
+ capture-subsystem {
+ compatible = "fsl,imx-capture-subsystem";
+ ports = <&ipu1_csi0>, <&ipu1_csi1>;
+ };
+
new file mode 100644
@@ -0,0 +1,126 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/fsl,imx6-mipi-csi2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPI CSI-2 Receiver core in the i.MX SoC
+
+description:
+ This is the device node for the MIPI CSI-2 Receiver core in the i.MX
+ SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
+ combined with a D-PHY core mixed into the same register block. In
+ addition this device consists of an i.MX-specific "CSI2IPU gasket"
+ glue logic, also controlled from the same register block. The CSI2IPU
+ gasket demultiplexes the four virtual channel streams from the host
+ controller's 32-bit output image bus onto four 16-bit parallel busses
+ to the i.MX IPU CSIs.
+
+maintainers:
+ - Frank Li <Frank.Li@nxp.com>
+
+properties:
+ compatible:
+ const: fsl,imx6-mipi-csi2
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: hsi_tx (the D-PHY clock)
+ - description: video_27m (D-PHY PLL reference clock)
+ - description: eim_podf;
+
+ clock-names:
+ items:
+ - const: dphy
+ - const: ref
+ - const: pix
+
+ interrupts:
+ maxItems: 2
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ port@0:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ Input port node, single endpoint describing the CSI-2 transmitter.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ clock-lanes:
+ const: 0
+
+ data-lanes:
+ minItems: 1
+ items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+
+ required:
+ - data-lanes
+
+patternProperties:
+ '^port@[1-4]':
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+ description:
+ ports 1 through 4 are output ports connecting with parallel bus sink
+ endpoint nodes and correspond to the four MIPI CSI-2 virtual channel
+ outputs.
+
+ properties:
+ endpoint@0:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ endpoint@1:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - clock-names
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx6qdl-clock.h>
+
+ mipi@21dc000 {
+ compatible = "fsl,imx6-mipi-csi2";
+ reg = <0x021dc000 0x4000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ clocks = <&clks IMX6QDL_CLK_HSI_TX>,
+ <&clks IMX6QDL_CLK_VIDEO_27M>,
+ <&clks IMX6QDL_CLK_EIM_PODF>;
+ clock-names = "dphy", "ref", "pix";
+
+ port@0 {
+ reg = <0>;
+
+ endpoint {
+ remote-endpoint = <&ov5640_to_mipi_csi2>;
+ clock-lanes = <0>;
+ data-lanes = <1 2>;
+ };
+ };
+ };
+
deleted file mode 100644
@@ -1,53 +0,0 @@
-Freescale i.MX Media Video Device
-=================================
-
-Video Media Controller node
----------------------------
-
-This is the media controller node for video capture support. It is a
-virtual device that lists the camera serial interface nodes that the
-media device will control.
-
-Required properties:
-- compatible : "fsl,imx-capture-subsystem";
-- ports : Should contain a list of phandles pointing to camera
- sensor interface ports of IPU devices
-
-example:
-
-capture-subsystem {
- compatible = "fsl,imx-capture-subsystem";
- ports = <&ipu1_csi0>, <&ipu1_csi1>;
-};
-
-
-mipi_csi2 node
---------------
-
-This is the device node for the MIPI CSI-2 Receiver core in the i.MX
-SoC. This is a Synopsys Designware MIPI CSI-2 host controller core
-combined with a D-PHY core mixed into the same register block. In
-addition this device consists of an i.MX-specific "CSI2IPU gasket"
-glue logic, also controlled from the same register block. The CSI2IPU
-gasket demultiplexes the four virtual channel streams from the host
-controller's 32-bit output image bus onto four 16-bit parallel busses
-to the i.MX IPU CSIs.
-
-Required properties:
-- compatible : "fsl,imx6-mipi-csi2";
-- reg : physical base address and length of the register set;
-- clocks : the MIPI CSI-2 receiver requires three clocks: hsi_tx
- (the D-PHY clock), video_27m (D-PHY PLL reference
- clock), and eim_podf;
-- clock-names : must contain "dphy", "ref", "pix";
-- port@* : five port nodes must exist, containing endpoints
- connecting to the source and sink devices according to
- of_graph bindings. The first port is an input port,
- connecting with a MIPI CSI-2 source, and ports 1
- through 4 are output ports connecting with parallel
- bus sink endpoint nodes and correspond to the four
- MIPI CSI-2 virtual channel outputs.
-
-Optional properties:
-- interrupts : must contain two level-triggered interrupts,
- in order: 100 and 101;
Convert binding doc imx.txt to yaml format. Create two yaml files: fsl,imx6-mipi-csi2.yaml and fsl,imx-capture-subsystem.yaml. Additional changes: - add example for fsl,imx6-mipi-csi2 Signed-off-by: Frank Li <Frank.Li@nxp.com> --- .../media/fsl,imx-capture-subsystem.yaml | 38 ++++++ .../bindings/media/fsl,imx6-mipi-csi2.yaml | 126 ++++++++++++++++++ .../devicetree/bindings/media/imx.txt | 53 -------- 3 files changed, 164 insertions(+), 53 deletions(-) create mode 100644 Documentation/devicetree/bindings/media/fsl,imx-capture-subsystem.yaml create mode 100644 Documentation/devicetree/bindings/media/fsl,imx6-mipi-csi2.yaml delete mode 100644 Documentation/devicetree/bindings/media/imx.txt