From patchwork Tue Aug 18 08:26:34 2015 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Hans Verkuil X-Patchwork-Id: 7029901 Return-Path: X-Original-To: patchwork-linux-media@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 0AF59C05AC for ; Tue, 18 Aug 2015 08:41:32 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id 645532066E for ; Tue, 18 Aug 2015 08:41:28 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 6610C20687 for ; Tue, 18 Aug 2015 08:41:24 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751860AbbHRIlH (ORCPT ); Tue, 18 Aug 2015 04:41:07 -0400 Received: from aer-iport-2.cisco.com ([173.38.203.52]:50624 "EHLO aer-iport-2.cisco.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752607AbbHRIjG (ORCPT ); Tue, 18 Aug 2015 04:39:06 -0400 DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=cisco.com; i=@cisco.com; l=62626; q=dns/txt; s=iport; t=1439887145; x=1441096745; h=from:to:cc:subject:date:message-id; bh=u8zZCGwQHyf1uVaBTc8v4LCXzDAS6Vy/UgsZo5T1Mpg=; b=k4P6iToJr5hHK7htjT6n3jtriIUO2kbwkexUbns9YHzWBPhISshZd442 5wqo4R1BA+A76aKmNR494UrgWkJBigyNguAzFPUcePc7zJqpBiY+yyF32 ay6a8w6uMvShFHmbUECcWilIowT8lgn08UdosT0xwKNiy3XMtsMSHo1FZ o=; X-IronPort-AV: E=Sophos;i="5.15,700,1432598400"; d="scan'208";a="611019150" Received: from aer-iport-nat.cisco.com (HELO aer-core-4.cisco.com) ([173.38.203.22]) by aer-iport-2.cisco.com with ESMTP; 18 Aug 2015 08:29:15 +0000 Received: from cobaltpc1.cisco.com (dhcp-10-54-92-107.cisco.com [10.54.92.107]) by aer-core-4.cisco.com (8.14.5/8.14.5) with ESMTP id t7I8T7ij022552; Tue, 18 Aug 2015 08:29:15 GMT From: Hans Verkuil To: linux-media@vger.kernel.org Cc: dri-devel@lists.freedesktop.org, m.szyprowski@samsung.com, kyungmin.park@samsung.com, thomas@tommie-lie.de, sean@mess.org, dmitry.torokhov@gmail.com, linux-input@vger.kernel.org, linux-samsung-soc@vger.kernel.org, lars@opdenkamp.eu, kamil@wypas.org, linux@arm.linux.org.uk, Hans Verkuil , Hans Verkuil Subject: [PATCHv8 09/15] DocBook/media: add CEC documentation Date: Tue, 18 Aug 2015 10:26:34 +0200 Message-Id: <221521eb854c05fd8105ee947edd73c39860a31e.1439886203.git.hans.verkuil@cisco.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: References: In-Reply-To: References: Sender: linux-media-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org X-Spam-Status: No, score=-14.9 required=5.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID, DKIM_VALID_AU, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY, USER_IN_DEF_DKIM_WL autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP From: Hans Verkuil Add DocBook documentation for the CEC API. Signed-off-by: Hans Verkuil [k.debski@samsung.com: add documentation for passthrough mode] [k.debski@samsung.com: minor fixes and change of reserved field sizes] Signed-off-by: Kamil Debski Signed-off-by: Hans Verkuil --- Documentation/DocBook/media/Makefile | 2 + Documentation/DocBook/media/v4l/biblio.xml | 10 + Documentation/DocBook/media/v4l/cec-api.xml | 75 +++++ Documentation/DocBook/media/v4l/cec-func-close.xml | 59 ++++ Documentation/DocBook/media/v4l/cec-func-ioctl.xml | 73 +++++ Documentation/DocBook/media/v4l/cec-func-open.xml | 94 +++++++ Documentation/DocBook/media/v4l/cec-func-poll.xml | 89 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-caps.xml | 138 ++++++++++ .../DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml | 306 +++++++++++++++++++++ .../DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml | 78 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-state.xml | 87 ++++++ .../DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml | 70 +++++ .../DocBook/media/v4l/cec-ioc-dqevent.xml | 125 +++++++++ .../DocBook/media/v4l/cec-ioc-g-monitor.xml | 86 ++++++ .../DocBook/media/v4l/cec-ioc-g-passthrough.xml | 81 ++++++ .../DocBook/media/v4l/cec-ioc-receive.xml | 185 +++++++++++++ Documentation/DocBook/media_api.tmpl | 8 +- 17 files changed, 1564 insertions(+), 2 deletions(-) create mode 100644 Documentation/DocBook/media/v4l/cec-api.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-close.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-ioctl.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-open.xml create mode 100644 Documentation/DocBook/media/v4l/cec-func-poll.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml create mode 100644 Documentation/DocBook/media/v4l/cec-ioc-receive.xml diff --git a/Documentation/DocBook/media/Makefile b/Documentation/DocBook/media/Makefile index 23996f8..5c89f4b 100644 --- a/Documentation/DocBook/media/Makefile +++ b/Documentation/DocBook/media/Makefile @@ -64,6 +64,7 @@ IOCTLS = \ $(shell perl -ne 'print "$$1 " if /\#define\s+([A-Z][^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /\#define\s+([^\s]+)\s+_IO/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ DEFINES = \ @@ -100,6 +101,7 @@ STRUCTS = \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/ && !/_old/)' $(srctree)/include/uapi/linux/dvb/net.h) \ $(shell perl -ne 'print "$$1 " if (/^struct\s+([^\s]+)\s+/)' $(srctree)/include/uapi/linux/dvb/video.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/media.h) \ + $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/cec.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-subdev.h) \ $(shell perl -ne 'print "$$1 " if /^struct\s+([^\s]+)\s+/' $(srctree)/include/uapi/linux/v4l2-mediabus.h) diff --git a/Documentation/DocBook/media/v4l/biblio.xml b/Documentation/DocBook/media/v4l/biblio.xml index fdee6b3..bed940b 100644 --- a/Documentation/DocBook/media/v4l/biblio.xml +++ b/Documentation/DocBook/media/v4l/biblio.xml @@ -324,6 +324,16 @@ in the frequency range from 87,5 to 108,0 MHz Specification Version 1.4a + + HDMI2 + + HDMI Licensing LLC +(http://www.hdmi.org) + + High-Definition Multimedia Interface + Specification Version 2.0 + + DP diff --git a/Documentation/DocBook/media/v4l/cec-api.xml b/Documentation/DocBook/media/v4l/cec-api.xml new file mode 100644 index 0000000..7394116 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-api.xml @@ -0,0 +1,75 @@ + + + + Hans + Verkuil +
hans.verkuil@cisco.com
 + Initial version. + + + + 2015 + Hans Verkuil + + + + + + 1.0.0 + 2015-04-27 + hv + Initial revision + + + + +CEC API + + + CEC: Consumer Electronics Control + +
+ Introduction + HDMI connectors provide a single pin for use by the Consumer Electronics + Control protocol. This protocol allows different devices connected by an HDMI cable + to communicate. The protocol for CEC version 1.4 is defined in supplements 1 (CEC) + and 2 (HEAC or HDMI Ethernet and Audio Return Channel) of the HDMI 1.4a + () specification and the extensions added to CEC version 2.0 + are defined in chapter 11 of the HDMI 2.0 () specification. + + + The bitrate is very slow (effectively no more than 36 bytes per second) and + is based on the ancient AV.link protocol used in old SCART connectors. The protocol + closely resembles a crazy Rube Goldberg contraption and is an unholy mix of low and + high level messages. Some messages, especially those part of the HEAC protocol layered + on top of CEC, need to be handled by the kernel, others can be handled either by the + kernel or by userspace. + + In addition, CEC can be implemented in HDMI receivers, transmitters and in USB + devices that have an HDMI input and an HDMI output and that control just the CEC pin. + + Drivers that support CEC and that allow (or require) userspace to handle CEC + messages and/or configure the CEC adapter will create a CEC device node (/dev/cecX) + to give userspace access to the CEC adapter. The &CEC-ADAP-G-CAPS; ioctl will tell userspace + what it is allowed to do. +
+ + + + Function Reference + + &sub-cec-func-open; + &sub-cec-func-close; + &sub-cec-func-ioctl; + &sub-cec-func-poll; + + &sub-cec-ioc-adap-g-caps; + &sub-cec-ioc-adap-g-log-addrs; + &sub-cec-ioc-adap-g-phys-addr; + &sub-cec-ioc-adap-g-state; + &sub-cec-ioc-adap-g-vendor-id; + &sub-cec-ioc-dqevent; + &sub-cec-ioc-g-monitor; + &sub-cec-ioc-g-passthrough; + &sub-cec-ioc-receive; + diff --git a/Documentation/DocBook/media/v4l/cec-func-close.xml b/Documentation/DocBook/media/v4l/cec-func-close.xml new file mode 100644 index 0000000..c3978af --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-close.xml @@ -0,0 +1,59 @@ + + + cec close() + &manvol; + + + + cec-close + Close a cec device + + + + + #include <unistd.h> + + int close + int fd + + + + + + Arguments + + + + fd + + &fd; + + + + + + + Description + + Closes the cec device. Resources associated with the file descriptor + are freed. The device configuration remain unchanged. + + + + Return Value + + close returns 0 on success. On error, -1 is + returned, and errno is set appropriately. Possible error + codes are: + + + + EBADF + + fd is not a valid open file descriptor. + + + + + + diff --git a/Documentation/DocBook/media/v4l/cec-func-ioctl.xml b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml new file mode 100644 index 0000000..ad85973 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-ioctl.xml @@ -0,0 +1,73 @@ + + + cec ioctl() + &manvol; + + + + cec-ioctl + Control a cec device + + + + + #include <sys/ioctl.h> + + int ioctl + int fd + int request + void *argp + + + + + + Arguments + + + + fd + + &fd; + + + + request + + CEC ioctl request code as defined in the cec.h header file, + for example CEC_G_CAPS. + + + + argp + + Pointer to a request-specific structure. + + + + + + + Description + The ioctl() function manipulates cec device + parameters. The argument fd must be an open file + descriptor. + The ioctl request code specifies the cec + function to be called. It has encoded in it whether the argument is an + input, output or read/write parameter, and the size of the argument + argp in bytes. + Macros and structures definitions specifying cec ioctl requests and + their parameters are located in the cec.h header file. All cec ioctl + requests, their respective function and parameters are specified in + . + + + + &return-value; + + Request-specific error codes are listed in the + individual requests descriptions. + When an ioctl that takes an output or read/write parameter fails, + the parameter remains unmodified. + + diff --git a/Documentation/DocBook/media/v4l/cec-func-open.xml b/Documentation/DocBook/media/v4l/cec-func-open.xml new file mode 100644 index 0000000..d814847 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-open.xml @@ -0,0 +1,94 @@ + + + cec open() + &manvol; + + + + cec-open + Open a cec device + + + + + #include <fcntl.h> + + int open + const char *device_name + int flags + + + + + + Arguments + + + + device_name + + Device to be opened. + + + + flags + + Open flags. Access mode must be either O_RDONLY + or O_RDWR. Other flags have no effect. + + + + + + Description + To open a cec device applications call open() + with the desired device name. The function has no side effects; the device + configuration remain unchanged. + When the device is opened in read-only mode, attempts to modify its + configuration will result in an error, and errno will be + set to EBADF. + + + Return Value + + open returns the new file descriptor on success. + On error, -1 is returned, and errno is set appropriately. + Possible error codes are: + + + + EACCES + + The requested access to the file is not allowed. + + + + EMFILE + + The process already has the maximum number of files open. + + + + + ENFILE + + The system limit on the total number of open files has been + reached. + + + + ENOMEM + + Insufficient kernel memory was available. + + + + ENXIO + + No device corresponding to this device special file exists. + + + + + + diff --git a/Documentation/DocBook/media/v4l/cec-func-poll.xml b/Documentation/DocBook/media/v4l/cec-func-poll.xml new file mode 100644 index 0000000..6853817 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-func-poll.xml @@ -0,0 +1,89 @@ + + + cec poll() + &manvol; + + + + cec-poll + Wait for some event on a file descriptor + + + + + #include <sys/poll.h> + + int poll + struct pollfd *ufds + unsigned int nfds + int timeout + + + + + + Description + + With the poll() function applications +can wait for CEC events. + + On success poll() returns the number of +file descriptors that have been selected (that is, file descriptors +for which the revents field of the +respective pollfd structure is non-zero). +CEC devices set the POLLIN and +POLLRDNORM flags in the +revents field if there are messages in the +receive queue. If the transmit queue has room for new messages, the +POLLOUT and POLLWRNORM +flags are set. If there are events in the event queue, then the +POLLPRI flag is set. +When the function timed out it returns a value of zero, on +failure it returns -1 and the +errno variable is set appropriately. + + + For more details see the +poll() manual page. + + + + Return Value + + On success, poll() returns the number +structures which have non-zero revents +fields, or zero if the call timed out. On error +-1 is returned, and the +errno variable is set appropriately: + + + + EBADF + + One or more of the ufds members +specify an invalid file descriptor. + + + + EFAULT + + ufds references an inaccessible +memory area. + + + + EINTR + + The call was interrupted by a signal. + + + + EINVAL + + The nfds argument is greater +than OPEN_MAX. + + + + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml new file mode 100644 index 0000000..db20619 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-caps.xml @@ -0,0 +1,138 @@ + + + ioctl CEC_ADAP_G_CAPS + &manvol; + + + + CEC_ADAP_G_CAPS + Query device capabilities + + + + + + int ioctl + int fd + int request + struct cec_caps *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_ADAP_G_CAPS + + + + argp + + + + + + + + + Description + + All cec devices must support the CEC_ADAP_G_CAPS + ioctl. To query device information, applications call the ioctl with a + pointer to a &cec-caps;. The driver fills the structure and returns + the information to the application. + The ioctl never fails. + + + struct <structname>cec_caps</structname> + + &cs-str; + + + __u32 + available_log_addrs + How many logical addresses does the CEC adapter support. This will + be at most CEC_MAX_LOG_ADDRS. + + + __u32 + capabilities + The capabilities of the CEC adapter, see . + + + __u8 + reserved[40] + Reserved for future extensions. Drivers must + set this array to zero. + + + +
+ + + CEC Capabilities Flags + + &cs-def; + + + CEC_CAP_STATE + 0x00000001 + Userspace has to configure the adapter state (enable or disable it) by + calling &CEC-ADAP-S-STATE;. + + + CEC_CAP_PHYS_ADDR + 0x00000002 + Userspace has to configure the physical address by + calling &CEC-ADAP-S-PHYS-ADDR;. + + + CEC_CAP_LOG_ADDRS + 0x00000004 + Userspace has to configure the logical addresses by + calling &CEC-ADAP-S-LOG-ADDRS;. + + + CEC_CAP_TRANSMIT + 0x00000008 + Userspace can transmit messages by calling &CEC-TRANSMIT;. + + + CEC_CAP_RECEIVE + 0x00000010 + Userspace can receive messages by calling &CEC-RECEIVE;. + + + CEC_CAP_VENDOR_ID + 0x00000020 + Userspace has to configure the vendor ID by + calling &CEC-ADAP-S-VENDOR-ID;. + + + CEC_CAP_PASSTHROUGH + 0x00000040 + Userspace can use the passthrough mode by + calling &CEC-G-PASSTHROUGH;. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml new file mode 100644 index 0000000..4d6575c --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-log-addrs.xml @@ -0,0 +1,306 @@ + + + ioctl CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS + &manvol; + + + + CEC_ADAP_G_LOG_ADDRS + CEC_ADAP_S_LOG_ADDRS + Get or set the logical addresses + + + + + + int ioctl + int fd + int request + struct cec_log_addrs *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_ADAP_G_LOG_ADDRS, CEC_ADAP_S_LOG_ADDRS + + + + argp + + + + + + + + + Description + + To query the current CEC logical addresses applications call the +CEC_ADAP_G_LOG_ADDRS ioctl with a pointer to a +cec_log_addrs structure where the drivers stores the +logical addresses. + + To set new logical addresses applications fill in struct cec_log_addrs +and call the CEC_ADAP_S_LOG_ADDRS ioctl with a pointer to this struct. +The CEC_ADAP_S_LOG_ADDRS ioctl is only available if +CEC_CAP_LOG_ADDRS is set. This ioctl will block until all +requested logical addresses have been claimed. + + + struct <structname>cec_log_addrs</structname> + + &cs-str; + + + __u8 + cec_version + The CEC version that this adapter shall use. See + . + Used to implement the CEC_MSG_CEC_VERSION and + CEC_MSG_REPORT_FEATURES messages. Note that + CEC_OP_CEC_VERSION_1_3A is not allowed + by the CEC framework. + + + + __u8 + num_log_addrs + Number of logical addresses to set up. Must be ≤ + available_log_addrs as returned by + &CEC-ADAP-G-CAPS;. All arrays in this structure are only filled up to + index available_log_addrs-1. The remaining + array elements will be ignored. Note that the CEC 2.0 standard allows + for a maximum of 2 logical addresses, although some hardware has support + for more. CEC_MAX_LOG_ADDRS is 4. The driver will + return the actual number of logical addresses it could claim, which may + be less than what was requested. If this field is set to 0, then the + CEC adapter shall clear all claimed logical addresses and all other + fields will be ignored. + + + __u8 + primary_device_type[CEC_MAX_LOG_ADDRS] + Primary device type for each logical address. See + for possible types. + + + __u8 + log_addr_type[CEC_MAX_LOG_ADDRS] + Logical address types. See for + possible types. The driver will update this with the actual logical address + type that it claimed (e.g. it may have to fallback to + CEC_LOG_ADDR_TYPE_UNREGISTERED). + + + __u8 + log_addr[CEC_MAX_LOG_ADDRS] + The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + CEC_LOG_ADDR_INVALID. + + + char + osd_name[15] + The actual logical addresses that were claimed. This is set by the + driver. If no logical address could be claimed, then it is set to + CEC_LOG_ADDR_INVALID. + + + __u8 + all_device_types[CEC_MAX_LOG_ADDRS] + CEC 2.0 specific: all device types. See . + Used to implement the CEC_MSG_REPORT_FEATURES message. + This field is ignored if cec_version < + CEC_OP_CEC_VERSION_2_0. + + + __u8 + features[CEC_MAX_LOG_ADDRS][12] + Features for each logical address. Used to implement the + CEC_MSG_REPORT_FEATURES message. The 12 bytes include + both the RC Profile and the Device Features. + This field is ignored if cec_version < + CEC_OP_CEC_VERSION_2_0. + + + __u8 + reserved[63] + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + +
+ + + CEC Versions + + &cs-def; + + + CEC_OP_CEC_VERSION_1_3A + 4 + CEC version according to the HDMI 1.3a standard. + + + CEC_OP_CEC_VERSION_1_4B + 5 + CEC version according to the HDMI 1.4b standard. + + + CEC_OP_CEC_VERSION_2_0 + 6 + CEC version according to the HDMI 2.0 standard. + + + +
+ + + CEC Primary Device Types + + &cs-def; + + + CEC_OP_PRIM_DEVTYPE_TV + 0 + Use for a TV. + + + CEC_OP_PRIM_DEVTYPE_RECORD + 1 + Use for a recording device. + + + CEC_OP_PRIM_DEVTYPE_TUNER + 3 + Use for a device with a tuner. + + + CEC_OP_PRIM_DEVTYPE_PLAYBACK + 4 + Use for a playback device. + + + CEC_OP_PRIM_DEVTYPE_AUDIOSYSTEM + 5 + Use for an audio system (e.g. an audio/video receiver). + + + CEC_OP_PRIM_DEVTYPE_SWITCH + 6 + Use for a CEC switch. + + + CEC_OP_PRIM_DEVTYPE_VIDEOPROC + 7 + Use for a video processor device. + + + +
+ + + CEC Logical Address Types + + &cs-def; + + + CEC_LOG_ADDR_TYPE_TV + 0 + Use for a TV. + + + CEC_LOG_ADDR_TYPE_RECORD + 1 + Use for a recording device. + + + CEC_LOG_ADDR_TYPE_TUNER + 2 + Use for a tuner device. + + + CEC_LOG_ADDR_TYPE_PLAYBACK + 3 + Use for a playback device. + + + CEC_LOG_ADDR_TYPE_AUDIOSYSTEM + 4 + Use for an audio system device. + + + CEC_LOG_ADDR_TYPE_SPECIFIC + 5 + Use for a second TV or for a video processor device. + + + CEC_LOG_ADDR_TYPE_UNREGISTERED + 6 + Fallback if all relevant logical addresses are claimed, or for + pure CEC switches or CDC-only devices (CDC: Capability Discovery and Control). + + + +
+ + + CEC All Device Types Flags + + &cs-def; + + + CEC_OP_ALL_DEVTYPE_TV + 0x80 + This supports the TV type. + + + CEC_OP_ALL_DEVTYPE_RECORD + 0x40 + This supports the Recording type. + + + CEC_OP_ALL_DEVTYPE_TUNER + 0x20 + This supports the Tuner type. + + + CEC_OP_ALL_DEVTYPE_PLAYBACK + 0x10 + This supports the Playback type. + + + CEC_OP_ALL_DEVTYPE_AUDIOSYSTEM + 0x08 + This supports the Audio System type. + + + CEC_OP_ALL_DEVTYPE_SWITCH + 0x04 + This supports the CEC Switch or Video Processing type. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml new file mode 100644 index 0000000..4d2827c --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-phys-addr.xml @@ -0,0 +1,78 @@ + + + ioctl CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR + &manvol; + + + + CEC_ADAP_G_PHYS_ADDR + CEC_ADAP_S_PHYS_ADDR + Get or set the physical address + + + + + + int ioctl + int fd + int request + __u16 *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_ADAP_G_PHYS_ADDR, CEC_ADAP_S_PHYS_ADDR + + + + argp + + + + + + + + + Description + + To query the current physical address applications call the +CEC_ADAP_G_PHYS_ADDR ioctl with a pointer to an __u16 +where the driver stores the physical address. + + To set a new physical address applications store the physical address in +an __u16 and call the CEC_ADAP_S_PHYS_ADDR ioctl with a +pointer to this integer. CEC_ADAP_S_PHYS_ADDR is only +available if CEC_CAP_PHYS_ADDR is set. + + The physical address is a 16-bit number where each group of 4 bits +represent a digit of the physical address a.b.c.d where the most significant +4 bits represent 'a'. The CEC root device (usually the TV) has address 0.0.0.0. +Every device that is hooked up to an input of the TV has address a.0.0.0 (where +'a' is ≥ 1), devices hooked up to those in turn have addresses a.b.0.0, etc. +So a topology of up to 5 devices deep is supported. The physical address a +device shall use is stored in the EDID of the sink. + +For example, the EDID for each HDMI input of the TV will have a different +physical address of the form a.0.0.0 that the sources will read out and use as +their physical address. + + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml new file mode 100644 index 0000000..19d1d45 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-state.xml @@ -0,0 +1,87 @@ + + + ioctl CEC_ADAP_G_STATE, CEC_ADAP_S_STATE + &manvol; + + + + CEC_ADAP_G_STATE + CEC_ADAP_S_STATE + Get or set the adapter state + + + + + + int ioctl + int fd + int request + __u32 *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_ADAP_G_STATE, CEC_ADAP_S_STATE + + + + argp + + + + + + + + + Description + + To query the current adapter state applications call the +CEC_ADAP_G_STATE ioctl with a pointer to an __u32 +where the driver stores the state. + + To set the adapter state applications store the CEC adapter state +in an __u32 and call the CEC_ADAP_S_STATE ioctl with a +pointer to this integer. CEC_ADAP_S_STATE is only +available if CEC_CAP_STATE is set. + + Available states are: + + + Adapter States + + &cs-def; + + + CEC_ADAP_DISABLED + 0 + The adapter is disabled. + + + CEC_ADAP_ENABLED + 1 + The adapter is enabled. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml new file mode 100644 index 0000000..0bf7731 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-adap-g-vendor-id.xml @@ -0,0 +1,70 @@ + + + ioctl CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID + &manvol; + + + + CEC_ADAP_G_VENDOR_ID + CEC_ADAP_S_VENDOR_ID + Get or set adapter vendor ID + + + + + + int ioctl + int fd + int request + __u32 *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_ADAP_G_VENDOR_ID, CEC_ADAP_S_VENDOR_ID + + + + argp + + + + + + + + + Description + + To query the current CEC adapter vendor ID applications call the +CEC_ADAP_G_VENDOR_ID ioctl with a pointer to an __u32 +where the driver stores the vendor ID. + + To set a new CEC adapter vendor ID applications store the vendor ID in +an __u32 and call the CEC_ADAP_S_VENDOR_ID ioctl with a +pointer to this integer. CEC_ADAP_S_VENDOR_ID is only +available if CEC_CAP_VENDOR_ID is set. + + The vendor ID is a 24-bit number that identifies the specific +vendor or entity. Based on this ID vendor specific commands may be +defined. + + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml new file mode 100644 index 0000000..cbde320 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-dqevent.xml @@ -0,0 +1,125 @@ + + + ioctl CEC_G_EVENT + &manvol; + + + + CEC_G_EVENT + Get a CEC event + + + + + + int ioctl + int fd + int request + struct cec_event *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_G_EVENT + + + + argp + + + + + + + + + Description + + CEC devices can send asynchronous events. These can be retrieved by calling + the CEC_G_EVENT ioctl. If the file descriptor is in non-blocking + mode and no event is pending, then it will return -1 and set errno to the &EAGAIN;. + + There can be up to 40 events queued up. If more events are added, then the oldest event will be discarded. + + + struct <structname>cec_event</structname> + + &cs-str; + + + __u64 + ts + Timestamp of the event in ns. + + + __u32 + event + The event, see . + + + __u32 + sequence + For the CEC_EVENT_GOT_REPLY event this + holds the sequence number of message that requested the reply. + + + + __u8 + reserved[8] + Reserved for future extensions. Drivers must + set this array to zero. + + + +
+ + + CEC Events + + &cs-def; + + + CEC_EVENT_CONNECT + 1 + Generated when the HDMI cable is connected. + + + CEC_EVENT_READY + 2 + Generated when all logical addresses are claimed. + + + CEC_EVENT_DISCONNECT + 3 + Generated when the HDMI cable is disconnected. + + + CEC_EVENT_GOT_REPLY + 4 + Generated when a reply is received for a previously sent + message. Generated only if a reply was requested and only if the + message was sent in non-blocking mode. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml new file mode 100644 index 0000000..6883003 --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-g-monitor.xml @@ -0,0 +1,86 @@ + + + ioctl CEC_G_MONITOR, CEC_S_MONITOR + &manvol; + + + + CEC_G_MONITOR + CEC_S_MONITOR + Get or set the monitor mode + + + + + + int ioctl + int fd + int request + __u32 *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_G_MONITOR, CEC_S_MONITOR + + + + argp + + + + + + + + + Description + + To query the current state of the monitor mode of the current file + descriptor applications call the CEC_G_MONITOR ioctl + with a pointer to an __u32 where the driver stores the state. + + To set the state of the monitor mode of the current file descriptor + applications store the monitor mode state in an __u32 and call the + CEC_S_MONITOR ioctl with a pointer to this integer. + + Available states are: + + + Monitor States + + &cs-def; + + + CEC_MONITOR_DISABLED + 0 + The monitor mode is disabled. + + + CEC_MONITOR_ENABLED + 1 + The monitor mode is enabled. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml new file mode 100644 index 0000000..127d65e --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-g-passthrough.xml @@ -0,0 +1,81 @@ + + + ioctl CEC_G_PASSTHROUGH + &manvol; + + + + CEC_G_PASSTHROUGH + Get the passthrough mode + + + + + + int ioctl + int fd + int request + __u32 *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_G_PASSTHROUGH + + + + argp + + + + + + + + + Description + + To query the current state of the passthrough mode of the current file + descriptor the applications call the CEC_G_PASSTHROUGH ioctl + with a pointer to an __u32 where the driver stores the state. + + Available states are: + + + Passthrough States + + &cs-def; + + + CEC_PASSTHROUGH_DISABLED + 0 + The passthrough mode is disabled. + + + CEC_PASSTHROUGH_ENABLED + 1 + The passthrough is enabled. + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media/v4l/cec-ioc-receive.xml b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml new file mode 100644 index 0000000..4b793df --- /dev/null +++ b/Documentation/DocBook/media/v4l/cec-ioc-receive.xml @@ -0,0 +1,185 @@ + + + ioctl CEC_RECEIVE, CEC_TRANSMIT + &manvol; + + + + CEC_RECEIVE + CEC_TRANSMIT + Receive or transmit a CEC message + + + + + + int ioctl + int fd + int request + struct cec_msg *argp + + + + + + Arguments + + + + fd + + File descriptor returned by + open(). + + + + request + + CEC_RECEIVE, CEC_TRANSMIT + + + + argp + + + + + + + + + Description + + To receive a CEC message the application has to fill in the + cec_msg structure and pass it to the + CEC_RECEIVE ioctl. CEC_RECEIVE is + only available if CEC_CAP_RECEIVE is set. If the + file descriptor is in non-blocking mode and there are no received + messages pending, then it will return -1 and set errno to the &EAGAIN;. + If the file descriptor is in blocking mode and timeout + is non-zero and no message arrived within timeout + milliseconds, then it will return -1 and set errno to the &ETIMEDOUT;. + + To send a CEC message the application has to fill in the + cec_msg structure and pass it to the + CEC_TRANSMIT ioctl. CEC_TRANSMIT is + only available if CEC_CAP_TRANSMIT is set. + If there is no more room in the transmit queue, then it will return + -1 and set errno to the &EBUSY;. + + + struct <structname>cec_msg</structname> + + &cs-str; + + + __u64 + ts + Timestamp of when the message was transmitted in ns in the case + of CEC_TRANSMIT with reply + set to 0, or the timestamp of the received message in all other cases. + + + __u32 + len + The length of the message. For CEC_TRANSMIT this + is filled in by the application. The driver will fill this in for + CEC_RECEIVE and for CEC_TRANSMIT + it will be filled in with the length of the reply message if + reply was set. + + + __u32 + status + The status of the message. When used with CEC_RECEIVE + this is always set to CEC_RX_STATUS_READY. When + used with CEC_TRANSMIT see + for the possible status values. + + + __u32 + timeout + The timeout in milliseconds. This is the time we wait for a message to + be received. If it is set to 0, then we wait indefinitely. + It is ignored by CEC_TRANSMIT. + + + __u8 + msg[16] + The message payload. For CEC_TRANSMIT this + is filled in by the application. The driver will fill this in for + CEC_RECEIVE and for CEC_TRANSMIT + it will be filled in with the payload of the reply message if + reply was set. + + + __u8 + reply + Wait until this message is replied. If reply + is 0, then don't wait for a reply but return after transmitting the + message. If there was an error as indicated by a non-zero status + field, then reply is set to 0 by the driver. + Ignored by CEC_RECEIVE. + + + __u32 + sequence + The sequence number is automatically assigned by the CEC + framework for all transmitted messages. It can be later used by the + framework to generate an event if a reply for a message was + requested and the message was transmitted in a non-blocking mode. + + + + __u8 + reserved[35] + Reserved for future extensions. Drivers and applications must + set this array to zero. + + + +
+ + + CEC Transmit Status + + &cs-def; + + + CEC_TX_STATUS_OK + 0x00 + The message was transmitted successfully. + + + CEC_TX_STATUS_ARB_LOST + 0x01 + CEC line arbitration was lost. + + + CEC_TX_STATUS_RETRY_TIMEOUT + 0x02 + The transmit timed out. The timeout period is 200 ms for a polling + message and 1 second for other messages as specified by the CEC protocol. + + + CEC_TX_STATUS_FEATURE_ABORT + 0x04 + The message was transmitted successfully but the reply was + CEC_MSG_FEATURE_ABORT. + + + CEC_TX_STATUS_REPLY_TIMEOUT + 0x08 + The message was transmitted successfully but the reply was never + received within the 1 second timeout period (this timeout value is + specified by the CEC protocol). + + + +
+ + + + &return-value; + + diff --git a/Documentation/DocBook/media_api.tmpl b/Documentation/DocBook/media_api.tmpl index f3f5fe5..3f76d41 100644 --- a/Documentation/DocBook/media_api.tmpl +++ b/Documentation/DocBook/media_api.tmpl @@ -38,7 +38,7 @@ LINUX MEDIA INFRASTRUCTURE API - 2009-2014 + 2009-2015 LinuxTV Developers @@ -75,7 +75,7 @@ The media infrastructure API was designed to control such - devices. It is divided into four parts. + devices. It is divided into five parts. The first part covers radio, video capture and output, cameras, analog TV devices and codecs. The second part covers the @@ -87,6 +87,7 @@ . The third part covers the Remote Controller API. The fourth part covers the Media Controller API. + The fifth part covers the CEC (Consumer Electronics Control) API. It should also be noted that a media device may also have audio components, like mixers, PCM capture, PCM playback, etc, which are controlled via ALSA API. @@ -107,6 +108,9 @@ &sub-media-controller; + +&sub-cec-api; + &sub-gen-errors;