@@ -180,8 +180,8 @@ enum dvbfe_search {
/**
* struct dvb_tuner_ops - Tuner information and callbacks
*
- * @info: embedded struct dvb_tuner_info with tuner properties
- * @release: callback function called when frontend is dettached.
+ * @info: embedded &struct dvb_tuner_info with tuner properties
+ * @release: callback function called when frontend is detached.
* drivers should free any allocated memory.
* @init: callback function used to initialize the tuner device.
* @sleep: callback function used to put the tuner to sleep.
@@ -191,14 +191,14 @@ enum dvbfe_search {
* resuming from suspend.
* @set_params: callback function used to inform the tuner to tune
* into a digital TV channel. The properties to be used
- * are stored at @dvb_frontend.dtv_property_cache;. The
- * tuner demod can change the parameters to reflect the
- * changes needed for the channel to be tuned, and
+ * are stored at &struct dvb_frontend.dtv_property_cache.
+ * The tuner demod can change the parameters to reflect
+ * the changes needed for the channel to be tuned, and
* update statistics. This is the recommended way to set
* the tuner parameters and should be used on newer
* drivers.
* @set_analog_params: callback function used to tune into an analog TV
- * channel on hybrid tuners. It passes @analog_parameters;
+ * channel on hybrid tuners. It passes @analog_parameters
* to the driver.
* @set_config: callback function used to send some tuner-specific
* parameters.
@@ -207,9 +207,9 @@ enum dvbfe_search {
* @get_if_frequency: get the Intermediate Frequency, in Hz. For baseband,
* should return 0.
* @get_status: returns the frontend lock status
- * @get_rf_strength: returns the RF signal strengh. Used mostly to support
+ * @get_rf_strength: returns the RF signal strength. Used mostly to support
* analog TV and radio. Digital TV should report, instead,
- * via DVBv5 API (@dvb_frontend.dtv_property_cache;).
+ * via DVBv5 API (&struct dvb_frontend.dtv_property_cache).
* @get_afc: Used only by analog TV core. Reports the frequency
* drift due to AFC.
* @calc_regs: callback function used to pass register data settings
@@ -217,7 +217,7 @@ enum dvbfe_search {
* @set_frequency: Set a new frequency. Shouldn't be used on newer drivers.
* @set_bandwidth: Set a new frequency. Shouldn't be used on newer drivers.
*
- * NOTE: frequencies used on get_frequency and set_frequency are in Hz for
+ * NOTE: frequencies used on @get_frequency and @set_frequency are in Hz for
* terrestrial/cable or kHz for satellite.
*
*/
@@ -283,14 +283,14 @@ struct analog_demod_info {
* @set_params: callback function used to inform the demod to set the
* demodulator parameters needed to decode an analog or
* radio channel. The properties are passed via
- * struct @analog_params;.
+ * &struct analog_params.
* @has_signal: returns 0xffff if has signal, or 0 if it doesn't.
* @get_afc: Used only by analog TV core. Reports the frequency
* drift due to AFC.
* @tuner_status: callback function that returns tuner status bits, e. g.
- * TUNER_STATUS_LOCKED and TUNER_STATUS_STEREO.
+ * %TUNER_STATUS_LOCKED and %TUNER_STATUS_STEREO.
* @standby: set the tuner to standby mode.
- * @release: callback function called when frontend is dettached.
+ * @release: callback function called when frontend is detached.
* drivers should free any allocated memory.
* @i2c_gate_ctrl: controls the I2C gate. Newer drivers should use I2C
* mux support instead.
@@ -321,10 +321,10 @@ struct dtv_frontend_properties;
* struct dvb_frontend_ops - Demodulation information and callbacks for
* ditialt TV
*
- * @info: embedded struct dvb_tuner_info with tuner properties
+ * @info: embedded &struct dvb_tuner_info with tuner properties
* @delsys: Delivery systems supported by the frontend
* @detach: callback function called when frontend is detached.
- * drivers should clean up, but not yet free the struct
+ * drivers should clean up, but not yet free the &struct
* dvb_frontend allocation.
* @release: callback function called when frontend is ready to be
* freed.
@@ -338,57 +338,57 @@ struct dtv_frontend_properties;
* allow other drivers to write data into their registers.
* Should not be used on new drivers.
* @tune: callback function used by demod drivers that use
- * @DVBFE_ALGO_HW; to tune into a frequency.
+ * @DVBFE_ALGO_HW to tune into a frequency.
* @get_frontend_algo: returns the desired hardware algorithm.
* @set_frontend: callback function used to inform the demod to set the
* parameters for demodulating a digital TV channel.
- * The properties to be used are stored at
- * @dvb_frontend.dtv_property_cache;. The demod can change
+ * The properties to be used are stored at &struct
+ * dvb_frontend.dtv_property_cache. The demod can change
* the parameters to reflect the changes needed for the
* channel to be decoded, and update statistics.
* @get_tune_settings: callback function
* @get_frontend: callback function used to inform the parameters
* actuall in use. The properties to be used are stored at
- * @dvb_frontend.dtv_property_cache; and update
+ * &struct dvb_frontend.dtv_property_cache and update
* statistics. Please notice that it should not return
* an error code if the statistics are not available
* because the demog is not locked.
* @read_status: returns the locking status of the frontend.
* @read_ber: legacy callback function to return the bit error rate.
* Newer drivers should provide such info via DVBv5 API,
- * e. g. @set_frontend;/@get_frontend;, implementing this
+ * e. g. @set_frontend;/@get_frontend, implementing this
* callback only if DVBv3 API compatibility is wanted.
* @read_signal_strength: legacy callback function to return the signal
* strength. Newer drivers should provide such info via
- * DVBv5 API, e. g. @set_frontend;/@get_frontend;,
+ * DVBv5 API, e. g. @set_frontend/@get_frontend,
* implementing this callback only if DVBv3 API
* compatibility is wanted.
* @read_snr: legacy callback function to return the Signal/Noise
* rate. Newer drivers should provide such info via
- * DVBv5 API, e. g. @set_frontend;/@get_frontend;,
+ * DVBv5 API, e. g. @set_frontend/@get_frontend,
* implementing this callback only if DVBv3 API
* compatibility is wanted.
* @read_ucblocks: legacy callback function to return the Uncorrected Error
* Blocks. Newer drivers should provide such info via
- * DVBv5 API, e. g. @set_frontend;/@get_frontend;,
+ * DVBv5 API, e. g. @set_frontend/@get_frontend,
* implementing this callback only if DVBv3 API
* compatibility is wanted.
* @diseqc_reset_overload: callback function to implement the
- * FE_DISEQC_RESET_OVERLOAD ioctl (only Satellite)
+ * FE_DISEQC_RESET_OVERLOAD() ioctl (only Satellite)
* @diseqc_send_master_cmd: callback function to implement the
- * FE_DISEQC_SEND_MASTER_CMD ioctl (only Satellite).
+ * FE_DISEQC_SEND_MASTER_CMD() ioctl (only Satellite).
* @diseqc_recv_slave_reply: callback function to implement the
- * FE_DISEQC_RECV_SLAVE_REPLY ioctl (only Satellite)
+ * FE_DISEQC_RECV_SLAVE_REPLY() ioctl (only Satellite)
* @diseqc_send_burst: callback function to implement the
- * FE_DISEQC_SEND_BURST ioctl (only Satellite).
+ * FE_DISEQC_SEND_BURST() ioctl (only Satellite).
* @set_tone: callback function to implement the
- * FE_SET_TONE ioctl (only Satellite).
+ * FE_SET_TONE() ioctl (only Satellite).
* @set_voltage: callback function to implement the
- * FE_SET_VOLTAGE ioctl (only Satellite).
+ * FE_SET_VOLTAGE() ioctl (only Satellite).
* @enable_high_lnb_voltage: callback function to implement the
- * FE_ENABLE_HIGH_LNB_VOLTAGE ioctl (only Satellite).
+ * FE_ENABLE_HIGH_LNB_VOLTAGE() ioctl (only Satellite).
* @dishnetwork_send_legacy_command: callback function to implement the
- * FE_DISHNETWORK_SEND_LEGACY_CMD ioctl (only Satellite).
+ * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl (only Satellite).
* Drivers should not use this, except when the DVB
* core emulation fails to provide proper support (e.g.
* if @set_voltage takes more than 8ms to work), and
@@ -399,8 +399,8 @@ struct dtv_frontend_properties;
* @ts_bus_ctrl: callback function used to take control of the TS bus.
* @set_lna: callback function to power on/off/auto the LNA.
* @search: callback function used on some custom algo search algos.
- * @tuner_ops: pointer to struct dvb_tuner_ops
- * @analog_ops: pointer to struct analog_demod_ops
+ * @tuner_ops: pointer to &struct dvb_tuner_ops
+ * @analog_ops: pointer to &struct analog_demod_ops
*/
struct dvb_frontend_ops {
struct dvb_frontend_info info;
@@ -630,16 +630,16 @@ struct dtv_frontend_properties {
/**
* struct dvb_frontend - Frontend structure to be used on drivers.
*
- * @refcount: refcount to keep track of struct dvb_frontend
+ * @refcount: refcount to keep track of &struct dvb_frontend
* references
- * @ops: embedded struct dvb_frontend_ops
- * @dvb: pointer to struct dvb_adapter
+ * @ops: embedded &struct dvb_frontend_ops
+ * @dvb: pointer to &struct dvb_adapter
* @demodulator_priv: demod private data
* @tuner_priv: tuner private data
* @frontend_priv: frontend private data
* @sec_priv: SEC private data
* @analog_demod_priv: Analog demod private data
- * @dtv_property_cache: embedded struct dtv_frontend_properties
+ * @dtv_property_cache: embedded &struct dtv_frontend_properties
* @callback: callback function used on some drivers to call
* either the tuner or the demodulator.
* @id: Frontend ID
@@ -668,8 +668,8 @@ struct dvb_frontend {
/**
* dvb_register_frontend() - Registers a DVB frontend at the adapter
*
- * @dvb: pointer to the dvb adapter
- * @fe: pointer to the frontend struct
+ * @dvb: pointer to &struct dvb_adapter
+ * @fe: pointer to &struct dvb_frontend
*
* Allocate and initialize the private data needed by the frontend core to
* manage the frontend and calls dvb_register_device() to register a new
@@ -682,7 +682,7 @@ int dvb_register_frontend(struct dvb_adapter *dvb,
/**
* dvb_unregister_frontend() - Unregisters a DVB frontend
*
- * @fe: pointer to the frontend struct
+ * @fe: pointer to &struct dvb_frontend
*
* Stops the frontend kthread, calls dvb_unregister_device() and frees the
* private frontend data allocated by dvb_register_frontend().
@@ -696,14 +696,14 @@ int dvb_unregister_frontend(struct dvb_frontend *fe);
/**
* dvb_frontend_detach() - Detaches and frees frontend specific data
*
- * @fe: pointer to the frontend struct
+ * @fe: pointer to &struct dvb_frontend
*
* This function should be called after dvb_unregister_frontend(). It
* calls the SEC, tuner and demod release functions:
* &dvb_frontend_ops.release_sec, &dvb_frontend_ops.tuner_ops.release,
* &dvb_frontend_ops.analog_ops.release and &dvb_frontend_ops.release.
*
- * If the driver is compiled with CONFIG_MEDIA_ATTACH, it also decreases
+ * If the driver is compiled with %CONFIG_MEDIA_ATTACH, it also decreases
* the module reference count, needed to allow userspace to remove the
* previously used DVB frontend modules.
*/
@@ -712,7 +712,7 @@ void dvb_frontend_detach(struct dvb_frontend *fe);
/**
* dvb_frontend_suspend() - Suspends a Digital TV frontend
*
- * @fe: pointer to the frontend struct
+ * @fe: pointer to &struct dvb_frontend
*
* This function prepares a Digital TV frontend to suspend.
*
@@ -730,7 +730,7 @@ int dvb_frontend_suspend(struct dvb_frontend *fe);
/**
* dvb_frontend_resume() - Resumes a Digital TV frontend
*
- * @fe: pointer to the frontend struct
+ * @fe: pointer to &struct dvb_frontend
*
* This function resumes the usual operation of the tuner after resume.
*
@@ -751,7 +751,7 @@ int dvb_frontend_resume(struct dvb_frontend *fe);
/**
* dvb_frontend_reinitialise() - forces a reinitialisation at the frontend
*
- * @fe: pointer to the frontend struct
+ * @fe: pointer to &struct dvb_frontend
*
* Calls &dvb_frontend_ops.init\(\) and &dvb_frontend_ops.tuner_ops.init\(\),
* and resets SEC tone and voltage (for Satellite systems).
@@ -766,16 +766,16 @@ void dvb_frontend_reinitialise(struct dvb_frontend *fe);
* dvb_frontend_sleep_until() - Sleep for the amount of time given by
* add_usec parameter
*
- * @waketime: pointer to a struct ktime_t
+ * @waketime: pointer to &struct ktime_t
* @add_usec: time to sleep, in microseconds
*
* This function is used to measure the time required for the
- * %FE_DISHNETWORK_SEND_LEGACY_CMD ioctl to work. It needs to be as precise
+ * FE_DISHNETWORK_SEND_LEGACY_CMD() ioctl to work. It needs to be as precise
* as possible, as it affects the detection of the dish tone command at the
* satellite subsystem.
*
* Its used internally by the DVB frontend core, in order to emulate
- * %FE_DISHNETWORK_SEND_LEGACY_CMD using the &dvb_frontend_ops.set_voltage\(\)
+ * FE_DISHNETWORK_SEND_LEGACY_CMD() using the &dvb_frontend_ops.set_voltage\(\)
* callback.
*
* NOTE: it should not be used at the drivers, as the emulation for the
Several minor adjustments at the kernel-doc markups: - some syntax fixes; - some cross-references; - add cross-references for the mentioned ioctls; - some constants marked as such. No functional changes. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- drivers/media/dvb-core/dvb_frontend.h | 94 +++++++++++++++++------------------ 1 file changed, 47 insertions(+), 47 deletions(-)