| Message ID | 3d2f6f2901b04db73a9c2f8189b97079b2a55371.1526577622.git-series.kieran.bingham+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kieran, Thank you for the patch. On Thursday, 17 May 2018 20:24:01 EEST Kieran Bingham wrote: > We are now able to configure a pipeline directly into a local display > list body. Take advantage of this fact, and create a cacheable body to > store the configuration of the pipeline in the video object. > > vsp1_video_pipeline_run() is now the last user of the pipe->dl object. > Convert this function to use the cached video->config body and obtain a > local display list reference. > > Attach the video->config body to the display list when needed before > committing to hardware. > > The pipe object is marked as un-configured when resuming from a suspend. Is this comment still valid ? > This ensures that when the hardware is reset - our cached configuration > will be re-attached to the next committed DL. > > Our video DL usage now looks like the below output: > > dl->body0 contains our disposable runtime configuration. Max 41. > dl_child->body0 is our partition specific configuration. Max 12. > dl->bodies shows our constant configuration and LUTs. > > These two are LUT/CLU: > * dl->bodies[x]->num_entries 256 / max 256 > * dl->bodies[x]->num_entries 4914 / max 4914 > > Which shows that our 'constant' configuration cache is currently > utilised to a maximum of 64 entries. > > trace-cmd report | \ > grep max | sed 's/.*vsp1_dl_list_commit://g' | sort | uniq; > > dl->body0->num_entries 13 / max 128 > dl->body0->num_entries 14 / max 128 > dl->body0->num_entries 16 / max 128 > dl->body0->num_entries 20 / max 128 > dl->body0->num_entries 27 / max 128 > dl->body0->num_entries 34 / max 128 > dl->body0->num_entries 41 / max 128 > dl_child->body0->num_entries 10 / max 128 > dl_child->body0->num_entries 12 / max 128 > dl->bodies[x]->num_entries 15 / max 128 > dl->bodies[x]->num_entries 16 / max 128 > dl->bodies[x]->num_entries 17 / max 128 > dl->bodies[x]->num_entries 18 / max 128 > dl->bodies[x]->num_entries 20 / max 128 > dl->bodies[x]->num_entries 21 / max 128 > dl->bodies[x]->num_entries 256 / max 256 > dl->bodies[x]->num_entries 31 / max 128 > dl->bodies[x]->num_entries 32 / max 128 > dl->bodies[x]->num_entries 39 / max 128 > dl->bodies[x]->num_entries 40 / max 128 > dl->bodies[x]->num_entries 47 / max 128 > dl->bodies[x]->num_entries 48 / max 128 > dl->bodies[x]->num_entries 4914 / max 4914 > dl->bodies[x]->num_entries 55 / max 128 > dl->bodies[x]->num_entries 56 / max 128 > dl->bodies[x]->num_entries 63 / max 128 > dl->bodies[x]->num_entries 64 / max 128 > > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > --- > v10: > - Removed pipe->configured flag, and use > pipe->state == VSP1_PIPELINE_STOPPED instead. > > v8: > - Fix comments > - Rename video->pipe_config -> video->stream_config > > v4: > - Adjust pipe configured flag to be reset on resume rather than suspend > - rename dl_child, dl_next > > v3: > - 's/fragment/body/', 's/fragments/bodies/' > - video dlb cache allocation increased from 2 to 3 dlbs > > drivers/media/platform/vsp1/vsp1_pipe.h | 3 +- > drivers/media/platform/vsp1/vsp1_video.c | 67 +++++++++++++++---------- > drivers/media/platform/vsp1/vsp1_video.h | 2 +- > 3 files changed, 43 insertions(+), 29 deletions(-) > > diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h > b/drivers/media/platform/vsp1/vsp1_pipe.h index e00010693eef..be6ecab3cbed > 100644 > --- a/drivers/media/platform/vsp1/vsp1_pipe.h > +++ b/drivers/media/platform/vsp1/vsp1_pipe.h > @@ -102,7 +102,6 @@ struct vsp1_partition { > * @uds: UDS entity, if present > * @uds_input: entity at the input of the UDS, if the UDS is present > * @entities: list of entities in the pipeline > - * @dl: display list associated with the pipeline > * @partitions: The number of partitions used to process one frame > * @partition: The current partition for configuration to process > * @part_table: The pre-calculated partitions used by the pipeline > @@ -139,8 +138,6 @@ struct vsp1_pipeline { > */ > struct list_head entities; > > - struct vsp1_dl_list *dl; > - > unsigned int partitions; > struct vsp1_partition *partition; > struct vsp1_partition *part_table; > diff --git a/drivers/media/platform/vsp1/vsp1_video.c > b/drivers/media/platform/vsp1/vsp1_video.c index 72f29773eb1c..f2bc26d28396 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_video.c > +++ b/drivers/media/platform/vsp1/vsp1_video.c > @@ -390,44 +390,48 @@ static void vsp1_video_pipeline_run_partition(struct > vsp1_pipeline *pipe, static void vsp1_video_pipeline_run(struct > vsp1_pipeline *pipe) > { > struct vsp1_device *vsp1 = pipe->output->entity.vsp1; > + struct vsp1_video *video = pipe->output->video; > struct vsp1_entity *entity; > struct vsp1_dl_body *dlb; > + struct vsp1_dl_list *dl; > unsigned int partition; > > - if (!pipe->dl) > - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); > + dl = vsp1_dl_list_get(pipe->output->dlm); > + > + /* Attach our pipe configuration to fully initialise the hardware. */ I'd expand this to explain that the cached stream configuration needs to be applied only if the VSP is uninitialized. How about /* * If the VSP hardware isn't configured yet (which occurs either when * processing the first frame or after a system suspend/resume), add the * cached stream configuration to the display list to perform a full * initialisation. */ > + if (pipe->state == VSP1_PIPELINE_STOPPED) > + vsp1_dl_list_add_body(dl, video->stream_config); The pipeline state is set to VSP1_PIPELINE_STOPPED at the end of every frame in vsp1_video_pipeline_frame_end(). Do you really want to fully reconfigure the hardware for every frame ? > - dlb = vsp1_dl_list_get_body0(pipe->dl); > + dlb = vsp1_dl_list_get_body0(dl); > > list_for_each_entry(entity, &pipe->entities, list_pipe) > - vsp1_entity_configure_frame(entity, pipe, pipe->dl, dlb); > + vsp1_entity_configure_frame(entity, pipe, dl, dlb); > > /* Run the first partition. */ > - vsp1_video_pipeline_run_partition(pipe, pipe->dl, 0); > + vsp1_video_pipeline_run_partition(pipe, dl, 0); > > /* Process consecutive partitions as necessary. */ > for (partition = 1; partition < pipe->partitions; ++partition) { > - struct vsp1_dl_list *dl; > + struct vsp1_dl_list *dl_next; > > - dl = vsp1_dl_list_get(pipe->output->dlm); > + dl_next = vsp1_dl_list_get(pipe->output->dlm); > > /* > * An incomplete chain will still function, but output only > * the partitions that had a dl available. The frame end > * interrupt will be marked on the last dl in the chain. > */ > - if (!dl) { > + if (!dl_next) { > dev_err(vsp1->dev, "Failed to obtain a dl list. Frame will be > incomplete\n"); break; > } > > - vsp1_video_pipeline_run_partition(pipe, dl, partition); > - vsp1_dl_list_add_chain(pipe->dl, dl); > + vsp1_video_pipeline_run_partition(pipe, dl_next, partition); > + vsp1_dl_list_add_chain(dl, dl_next); > } > > /* Complete, and commit the head display list. */ > - vsp1_dl_list_commit(pipe->dl, false); > - pipe->dl = NULL; > + vsp1_dl_list_commit(dl, false); > > vsp1_pipeline_run(pipe); > } > @@ -790,8 +794,8 @@ static void vsp1_video_buffer_queue(struct vb2_buffer > *vb) > > static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) > { > + struct vsp1_video *video = pipe->output->video; > struct vsp1_entity *entity; > - struct vsp1_dl_body *dlb; > int ret; > > /* Determine this pipelines sizes for image partitioning support. */ > @@ -799,14 +803,6 @@ static int vsp1_video_setup_pipeline(struct > vsp1_pipeline *pipe) if (ret < 0) > return ret; > > - /* Prepare the display list. */ > - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); > - if (!pipe->dl) > - return -ENOMEM; > - > - /* Retrieve the default DLB from the list. */ > - dlb = vsp1_dl_list_get_body0(pipe->dl); > - > if (pipe->uds) { > struct vsp1_uds *uds = to_uds(&pipe->uds->subdev); > > @@ -828,9 +824,16 @@ static int vsp1_video_setup_pipeline(struct > vsp1_pipeline *pipe) } > } > > + /* Obtain a clean body from our pool. */ > + video->stream_config = vsp1_dl_body_get(video->dlbs); > + if (!video->stream_config) > + return -ENOMEM; > + > + /* Configure the entities into our cached pipe configuration. */ I would group the two comments to better explain what we're doing here. How about something like this ? /* * Compute and cache the stream configuration for the pipeline. First * create a display list body to hold the configuration, and then write * routing and stream configuration for each entity in the body. The * body will be added to the display list by vsp1_video_pipeline_run() * when the pipeline needs to be fully reconfigured. */ > list_for_each_entry(entity, &pipe->entities, list_pipe) { > - vsp1_entity_route_setup(entity, pipe, dlb); > - vsp1_entity_configure_stream(entity, pipe, dlb); > + vsp1_entity_route_setup(entity, pipe, video->stream_config); > + vsp1_entity_configure_stream(entity, pipe, > + video->stream_config); > } > > return 0; > @@ -842,6 +845,9 @@ static void vsp1_video_cleanup_pipeline(struct > vsp1_pipeline *pipe) struct vsp1_vb2_buffer *buffer; > unsigned long flags; > > + /* Release any cached configuration. */ > + vsp1_dl_body_put(video->stream_config); > + > /* Remove all buffers from the IRQ queue. */ > spin_lock_irqsave(&video->irqlock, flags); > list_for_each_entry(buffer, &video->irqqueue, queue) > @@ -918,9 +924,6 @@ static void vsp1_video_stop_streaming(struct vb2_queue > *vq) ret = vsp1_pipeline_stop(pipe); > if (ret == -ETIMEDOUT) > dev_err(video->vsp1->dev, "pipeline stop timeout\n"); > - > - vsp1_dl_list_put(pipe->dl); > - pipe->dl = NULL; > } > mutex_unlock(&pipe->lock); > > @@ -1240,6 +1243,16 @@ struct vsp1_video *vsp1_video_create(struct > vsp1_device *vsp1, goto error; > } > > + /* > + * Utilise a body pool to cache the constant configuration of the > + * pipeline object. > + */ > + video->dlbs = vsp1_dl_body_pool_create(vsp1, 3, 128, 0); Why do we preallocate three bodies here, don't we need just one ? I'm also wondering whether we could reuse the WPF body pool instead of creating a new one. > + if (!video->dlbs) { > + ret = -ENOMEM; > + goto error; > + } > + > return video; > > error: > @@ -1249,6 +1262,8 @@ struct vsp1_video *vsp1_video_create(struct > vsp1_device *vsp1, > > void vsp1_video_cleanup(struct vsp1_video *video) > { > + vsp1_dl_body_pool_destroy(video->dlbs); > + > if (video_is_registered(&video->video)) > video_unregister_device(&video->video); > > diff --git a/drivers/media/platform/vsp1/vsp1_video.h > b/drivers/media/platform/vsp1/vsp1_video.h index 75a5a65c66fe..77bbfb4a5b54 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_video.h > +++ b/drivers/media/platform/vsp1/vsp1_video.h > @@ -39,6 +39,8 @@ struct vsp1_video { > > struct mutex lock; > > + struct vsp1_dl_body_pool *dlbs; > + struct vsp1_dl_body *stream_config; > unsigned int pipe_index; > > struct vb2_queue queue;
Hi Laurent, On 17/05/18 20:57, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Thursday, 17 May 2018 20:24:01 EEST Kieran Bingham wrote: >> We are now able to configure a pipeline directly into a local display >> list body. Take advantage of this fact, and create a cacheable body to >> store the configuration of the pipeline in the video object. >> >> vsp1_video_pipeline_run() is now the last user of the pipe->dl object. >> Convert this function to use the cached video->config body and obtain a >> local display list reference. >> >> Attach the video->config body to the display list when needed before >> committing to hardware. >> >> The pipe object is marked as un-configured when resuming from a suspend. > > Is this comment still valid ? Nope :D Updated in latest local patch. > >> This ensures that when the hardware is reset - our cached configuration >> will be re-attached to the next committed DL. >> >> Our video DL usage now looks like the below output: >> >> dl->body0 contains our disposable runtime configuration. Max 41. >> dl_child->body0 is our partition specific configuration. Max 12. >> dl->bodies shows our constant configuration and LUTs. >> >> These two are LUT/CLU: >> * dl->bodies[x]->num_entries 256 / max 256 >> * dl->bodies[x]->num_entries 4914 / max 4914 >> >> Which shows that our 'constant' configuration cache is currently >> utilised to a maximum of 64 entries. >> >> trace-cmd report | \ >> grep max | sed 's/.*vsp1_dl_list_commit://g' | sort | uniq; >> >> dl->body0->num_entries 13 / max 128 >> dl->body0->num_entries 14 / max 128 >> dl->body0->num_entries 16 / max 128 >> dl->body0->num_entries 20 / max 128 >> dl->body0->num_entries 27 / max 128 >> dl->body0->num_entries 34 / max 128 >> dl->body0->num_entries 41 / max 128 >> dl_child->body0->num_entries 10 / max 128 >> dl_child->body0->num_entries 12 / max 128 >> dl->bodies[x]->num_entries 15 / max 128 >> dl->bodies[x]->num_entries 16 / max 128 >> dl->bodies[x]->num_entries 17 / max 128 >> dl->bodies[x]->num_entries 18 / max 128 >> dl->bodies[x]->num_entries 20 / max 128 >> dl->bodies[x]->num_entries 21 / max 128 >> dl->bodies[x]->num_entries 256 / max 256 >> dl->bodies[x]->num_entries 31 / max 128 >> dl->bodies[x]->num_entries 32 / max 128 >> dl->bodies[x]->num_entries 39 / max 128 >> dl->bodies[x]->num_entries 40 / max 128 >> dl->bodies[x]->num_entries 47 / max 128 >> dl->bodies[x]->num_entries 48 / max 128 >> dl->bodies[x]->num_entries 4914 / max 4914 >> dl->bodies[x]->num_entries 55 / max 128 >> dl->bodies[x]->num_entries 56 / max 128 >> dl->bodies[x]->num_entries 63 / max 128 >> dl->bodies[x]->num_entries 64 / max 128 >> >> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> >> --- >> v10: >> - Removed pipe->configured flag, and use >> pipe->state == VSP1_PIPELINE_STOPPED instead. >> >> v8: >> - Fix comments >> - Rename video->pipe_config -> video->stream_config >> >> v4: >> - Adjust pipe configured flag to be reset on resume rather than suspend >> - rename dl_child, dl_next >> >> v3: >> - 's/fragment/body/', 's/fragments/bodies/' >> - video dlb cache allocation increased from 2 to 3 dlbs >> >> drivers/media/platform/vsp1/vsp1_pipe.h | 3 +- >> drivers/media/platform/vsp1/vsp1_video.c | 67 +++++++++++++++---------- >> drivers/media/platform/vsp1/vsp1_video.h | 2 +- >> 3 files changed, 43 insertions(+), 29 deletions(-) >> >> diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h >> b/drivers/media/platform/vsp1/vsp1_pipe.h index e00010693eef..be6ecab3cbed >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_pipe.h >> +++ b/drivers/media/platform/vsp1/vsp1_pipe.h >> @@ -102,7 +102,6 @@ struct vsp1_partition { >> * @uds: UDS entity, if present >> * @uds_input: entity at the input of the UDS, if the UDS is present >> * @entities: list of entities in the pipeline >> - * @dl: display list associated with the pipeline >> * @partitions: The number of partitions used to process one frame >> * @partition: The current partition for configuration to process >> * @part_table: The pre-calculated partitions used by the pipeline >> @@ -139,8 +138,6 @@ struct vsp1_pipeline { >> */ >> struct list_head entities; >> >> - struct vsp1_dl_list *dl; >> - >> unsigned int partitions; >> struct vsp1_partition *partition; >> struct vsp1_partition *part_table; >> diff --git a/drivers/media/platform/vsp1/vsp1_video.c >> b/drivers/media/platform/vsp1/vsp1_video.c index 72f29773eb1c..f2bc26d28396 >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_video.c >> +++ b/drivers/media/platform/vsp1/vsp1_video.c >> @@ -390,44 +390,48 @@ static void vsp1_video_pipeline_run_partition(struct >> vsp1_pipeline *pipe, static void vsp1_video_pipeline_run(struct >> vsp1_pipeline *pipe) >> { >> struct vsp1_device *vsp1 = pipe->output->entity.vsp1; >> + struct vsp1_video *video = pipe->output->video; >> struct vsp1_entity *entity; >> struct vsp1_dl_body *dlb; >> + struct vsp1_dl_list *dl; >> unsigned int partition; >> >> - if (!pipe->dl) >> - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); >> + dl = vsp1_dl_list_get(pipe->output->dlm); >> + >> + /* Attach our pipe configuration to fully initialise the hardware. */ > > I'd expand this to explain that the cached stream configuration needs to be > applied only if the VSP is uninitialized. How about > > /* > * If the VSP hardware isn't configured yet (which occurs either when > * processing the first frame or after a system suspend/resume), add the > * cached stream configuration to the display list to perform a full > * initialisation. > */ > That sounds good. >> + if (pipe->state == VSP1_PIPELINE_STOPPED) >> + vsp1_dl_list_add_body(dl, video->stream_config); > > The pipeline state is set to VSP1_PIPELINE_STOPPED at the end of every frame > in vsp1_video_pipeline_frame_end(). Do you really want to fully reconfigure > the hardware for every frame ? Argh ... That I hadn't noticed ... and could be why I added the separate flag in the first place. I've attempted before to add a new state for this and for some reason failed ... I guess it's time to try again. > >> - dlb = vsp1_dl_list_get_body0(pipe->dl); >> + dlb = vsp1_dl_list_get_body0(dl); >> >> list_for_each_entry(entity, &pipe->entities, list_pipe) >> - vsp1_entity_configure_frame(entity, pipe, pipe->dl, dlb); >> + vsp1_entity_configure_frame(entity, pipe, dl, dlb); >> >> /* Run the first partition. */ >> - vsp1_video_pipeline_run_partition(pipe, pipe->dl, 0); >> + vsp1_video_pipeline_run_partition(pipe, dl, 0); >> >> /* Process consecutive partitions as necessary. */ >> for (partition = 1; partition < pipe->partitions; ++partition) { >> - struct vsp1_dl_list *dl; >> + struct vsp1_dl_list *dl_next; >> >> - dl = vsp1_dl_list_get(pipe->output->dlm); >> + dl_next = vsp1_dl_list_get(pipe->output->dlm); >> >> /* >> * An incomplete chain will still function, but output only >> * the partitions that had a dl available. The frame end >> * interrupt will be marked on the last dl in the chain. >> */ >> - if (!dl) { >> + if (!dl_next) { >> dev_err(vsp1->dev, "Failed to obtain a dl list. Frame will be >> incomplete\n"); break; >> } >> >> - vsp1_video_pipeline_run_partition(pipe, dl, partition); >> - vsp1_dl_list_add_chain(pipe->dl, dl); >> + vsp1_video_pipeline_run_partition(pipe, dl_next, partition); >> + vsp1_dl_list_add_chain(dl, dl_next); >> } >> >> /* Complete, and commit the head display list. */ >> - vsp1_dl_list_commit(pipe->dl, false); >> - pipe->dl = NULL; >> + vsp1_dl_list_commit(dl, false); >> >> vsp1_pipeline_run(pipe); >> } >> @@ -790,8 +794,8 @@ static void vsp1_video_buffer_queue(struct vb2_buffer >> *vb) >> >> static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) >> { >> + struct vsp1_video *video = pipe->output->video; >> struct vsp1_entity *entity; >> - struct vsp1_dl_body *dlb; >> int ret; >> >> /* Determine this pipelines sizes for image partitioning support. */ >> @@ -799,14 +803,6 @@ static int vsp1_video_setup_pipeline(struct >> vsp1_pipeline *pipe) if (ret < 0) >> return ret; >> >> - /* Prepare the display list. */ >> - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); >> - if (!pipe->dl) >> - return -ENOMEM; >> - >> - /* Retrieve the default DLB from the list. */ >> - dlb = vsp1_dl_list_get_body0(pipe->dl); >> - >> if (pipe->uds) { >> struct vsp1_uds *uds = to_uds(&pipe->uds->subdev); >> >> @@ -828,9 +824,16 @@ static int vsp1_video_setup_pipeline(struct >> vsp1_pipeline *pipe) } >> } >> >> + /* Obtain a clean body from our pool. */ >> + video->stream_config = vsp1_dl_body_get(video->dlbs); >> + if (!video->stream_config) >> + return -ENOMEM; >> + >> + /* Configure the entities into our cached pipe configuration. */ > > I would group the two comments to better explain what we're doing here. How > about something like this ? > > /* > * Compute and cache the stream configuration for the pipeline. First > * create a display list body to hold the configuration, and then write > * routing and stream configuration for each entity in the body. The > * body will be added to the display list by vsp1_video_pipeline_run() > * when the pipeline needs to be fully reconfigured. > */ Sounds good. To make this a bit more succinct I've gone for : /* * Compute and cache the stream configuration into a body. The cached * body will be added to the display list by vsp1_video_pipeline_run() * whenever the pipeline needs to be fully reconfigured. */ > >> list_for_each_entry(entity, &pipe->entities, list_pipe) { >> - vsp1_entity_route_setup(entity, pipe, dlb); >> - vsp1_entity_configure_stream(entity, pipe, dlb); >> + vsp1_entity_route_setup(entity, pipe, video->stream_config); >> + vsp1_entity_configure_stream(entity, pipe, >> + video->stream_config); >> } >> >> return 0; >> @@ -842,6 +845,9 @@ static void vsp1_video_cleanup_pipeline(struct >> vsp1_pipeline *pipe) struct vsp1_vb2_buffer *buffer; >> unsigned long flags; >> >> + /* Release any cached configuration. */ >> + vsp1_dl_body_put(video->stream_config); >> + >> /* Remove all buffers from the IRQ queue. */ >> spin_lock_irqsave(&video->irqlock, flags); >> list_for_each_entry(buffer, &video->irqqueue, queue) >> @@ -918,9 +924,6 @@ static void vsp1_video_stop_streaming(struct vb2_queue >> *vq) ret = vsp1_pipeline_stop(pipe); >> if (ret == -ETIMEDOUT) >> dev_err(video->vsp1->dev, "pipeline stop timeout\n"); >> - >> - vsp1_dl_list_put(pipe->dl); >> - pipe->dl = NULL; >> } >> mutex_unlock(&pipe->lock); >> >> @@ -1240,6 +1243,16 @@ struct vsp1_video *vsp1_video_create(struct >> vsp1_device *vsp1, goto error; >> } >> >> + /* >> + * Utilise a body pool to cache the constant configuration of the >> + * pipeline object. >> + */ >> + video->dlbs = vsp1_dl_body_pool_create(vsp1, 3, 128, 0); > > Why do we preallocate three bodies here, don't we need just one ? I guess this is a copy-paste fail from grabbing the vsp1_dl_body_pool_create() line from elsewhere, however ... > > I'm also wondering whether we could reuse the WPF body pool instead of > creating a new one. This I think could make a lot of sense, except for the body sizing, is then locked to be the same. This is currently 256 entries, which is still less than the 384 that we are currently allocating by having 3 objects in the pool. I had planned to reduce the size of the dlm->pool - but that conflicted with a configuration used by the BSP team - and so I have kept the size for now. Either way - removing the video->pool - and using it as a shared resource (as we only need 1 for the cache) seems reasonable. The WPF currently asks for 64 display lists to be allocated. In turn we create 64 display lists, and 64 bodies in the pool. I think we can simply add '1' to the dlm->pool creation (with a comment to explain where the extra is used) and this will be fine. > >> + if (!video->dlbs) { >> + ret = -ENOMEM; >> + goto error; >> + } >> + >> return video; >> >> error: >> @@ -1249,6 +1262,8 @@ struct vsp1_video *vsp1_video_create(struct >> vsp1_device *vsp1, >> >> void vsp1_video_cleanup(struct vsp1_video *video) >> { >> + vsp1_dl_body_pool_destroy(video->dlbs); >> + >> if (video_is_registered(&video->video)) >> video_unregister_device(&video->video); >> >> diff --git a/drivers/media/platform/vsp1/vsp1_video.h >> b/drivers/media/platform/vsp1/vsp1_video.h index 75a5a65c66fe..77bbfb4a5b54 >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_video.h >> +++ b/drivers/media/platform/vsp1/vsp1_video.h >> @@ -39,6 +39,8 @@ struct vsp1_video { >> >> struct mutex lock; >> >> + struct vsp1_dl_body_pool *dlbs; >> + struct vsp1_dl_body *stream_config; >> unsigned int pipe_index; >> >> struct vb2_queue queue; >
diff --git a/drivers/media/platform/vsp1/vsp1_pipe.h b/drivers/media/platform/vsp1/vsp1_pipe.h index e00010693eef..be6ecab3cbed 100644 --- a/drivers/media/platform/vsp1/vsp1_pipe.h +++ b/drivers/media/platform/vsp1/vsp1_pipe.h @@ -102,7 +102,6 @@ struct vsp1_partition { * @uds: UDS entity, if present * @uds_input: entity at the input of the UDS, if the UDS is present * @entities: list of entities in the pipeline - * @dl: display list associated with the pipeline * @partitions: The number of partitions used to process one frame * @partition: The current partition for configuration to process * @part_table: The pre-calculated partitions used by the pipeline @@ -139,8 +138,6 @@ struct vsp1_pipeline { */ struct list_head entities; - struct vsp1_dl_list *dl; - unsigned int partitions; struct vsp1_partition *partition; struct vsp1_partition *part_table; diff --git a/drivers/media/platform/vsp1/vsp1_video.c b/drivers/media/platform/vsp1/vsp1_video.c index 72f29773eb1c..f2bc26d28396 100644 --- a/drivers/media/platform/vsp1/vsp1_video.c +++ b/drivers/media/platform/vsp1/vsp1_video.c @@ -390,44 +390,48 @@ static void vsp1_video_pipeline_run_partition(struct vsp1_pipeline *pipe, static void vsp1_video_pipeline_run(struct vsp1_pipeline *pipe) { struct vsp1_device *vsp1 = pipe->output->entity.vsp1; + struct vsp1_video *video = pipe->output->video; struct vsp1_entity *entity; struct vsp1_dl_body *dlb; + struct vsp1_dl_list *dl; unsigned int partition; - if (!pipe->dl) - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); + dl = vsp1_dl_list_get(pipe->output->dlm); + + /* Attach our pipe configuration to fully initialise the hardware. */ + if (pipe->state == VSP1_PIPELINE_STOPPED) + vsp1_dl_list_add_body(dl, video->stream_config); - dlb = vsp1_dl_list_get_body0(pipe->dl); + dlb = vsp1_dl_list_get_body0(dl); list_for_each_entry(entity, &pipe->entities, list_pipe) - vsp1_entity_configure_frame(entity, pipe, pipe->dl, dlb); + vsp1_entity_configure_frame(entity, pipe, dl, dlb); /* Run the first partition. */ - vsp1_video_pipeline_run_partition(pipe, pipe->dl, 0); + vsp1_video_pipeline_run_partition(pipe, dl, 0); /* Process consecutive partitions as necessary. */ for (partition = 1; partition < pipe->partitions; ++partition) { - struct vsp1_dl_list *dl; + struct vsp1_dl_list *dl_next; - dl = vsp1_dl_list_get(pipe->output->dlm); + dl_next = vsp1_dl_list_get(pipe->output->dlm); /* * An incomplete chain will still function, but output only * the partitions that had a dl available. The frame end * interrupt will be marked on the last dl in the chain. */ - if (!dl) { + if (!dl_next) { dev_err(vsp1->dev, "Failed to obtain a dl list. Frame will be incomplete\n"); break; } - vsp1_video_pipeline_run_partition(pipe, dl, partition); - vsp1_dl_list_add_chain(pipe->dl, dl); + vsp1_video_pipeline_run_partition(pipe, dl_next, partition); + vsp1_dl_list_add_chain(dl, dl_next); } /* Complete, and commit the head display list. */ - vsp1_dl_list_commit(pipe->dl, false); - pipe->dl = NULL; + vsp1_dl_list_commit(dl, false); vsp1_pipeline_run(pipe); } @@ -790,8 +794,8 @@ static void vsp1_video_buffer_queue(struct vb2_buffer *vb) static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) { + struct vsp1_video *video = pipe->output->video; struct vsp1_entity *entity; - struct vsp1_dl_body *dlb; int ret; /* Determine this pipelines sizes for image partitioning support. */ @@ -799,14 +803,6 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) if (ret < 0) return ret; - /* Prepare the display list. */ - pipe->dl = vsp1_dl_list_get(pipe->output->dlm); - if (!pipe->dl) - return -ENOMEM; - - /* Retrieve the default DLB from the list. */ - dlb = vsp1_dl_list_get_body0(pipe->dl); - if (pipe->uds) { struct vsp1_uds *uds = to_uds(&pipe->uds->subdev); @@ -828,9 +824,16 @@ static int vsp1_video_setup_pipeline(struct vsp1_pipeline *pipe) } } + /* Obtain a clean body from our pool. */ + video->stream_config = vsp1_dl_body_get(video->dlbs); + if (!video->stream_config) + return -ENOMEM; + + /* Configure the entities into our cached pipe configuration. */ list_for_each_entry(entity, &pipe->entities, list_pipe) { - vsp1_entity_route_setup(entity, pipe, dlb); - vsp1_entity_configure_stream(entity, pipe, dlb); + vsp1_entity_route_setup(entity, pipe, video->stream_config); + vsp1_entity_configure_stream(entity, pipe, + video->stream_config); } return 0; @@ -842,6 +845,9 @@ static void vsp1_video_cleanup_pipeline(struct vsp1_pipeline *pipe) struct vsp1_vb2_buffer *buffer; unsigned long flags; + /* Release any cached configuration. */ + vsp1_dl_body_put(video->stream_config); + /* Remove all buffers from the IRQ queue. */ spin_lock_irqsave(&video->irqlock, flags); list_for_each_entry(buffer, &video->irqqueue, queue) @@ -918,9 +924,6 @@ static void vsp1_video_stop_streaming(struct vb2_queue *vq) ret = vsp1_pipeline_stop(pipe); if (ret == -ETIMEDOUT) dev_err(video->vsp1->dev, "pipeline stop timeout\n"); - - vsp1_dl_list_put(pipe->dl); - pipe->dl = NULL; } mutex_unlock(&pipe->lock); @@ -1240,6 +1243,16 @@ struct vsp1_video *vsp1_video_create(struct vsp1_device *vsp1, goto error; } + /* + * Utilise a body pool to cache the constant configuration of the + * pipeline object. + */ + video->dlbs = vsp1_dl_body_pool_create(vsp1, 3, 128, 0); + if (!video->dlbs) { + ret = -ENOMEM; + goto error; + } + return video; error: @@ -1249,6 +1262,8 @@ struct vsp1_video *vsp1_video_create(struct vsp1_device *vsp1, void vsp1_video_cleanup(struct vsp1_video *video) { + vsp1_dl_body_pool_destroy(video->dlbs); + if (video_is_registered(&video->video)) video_unregister_device(&video->video); diff --git a/drivers/media/platform/vsp1/vsp1_video.h b/drivers/media/platform/vsp1/vsp1_video.h index 75a5a65c66fe..77bbfb4a5b54 100644 --- a/drivers/media/platform/vsp1/vsp1_video.h +++ b/drivers/media/platform/vsp1/vsp1_video.h @@ -39,6 +39,8 @@ struct vsp1_video { struct mutex lock; + struct vsp1_dl_body_pool *dlbs; + struct vsp1_dl_body *stream_config; unsigned int pipe_index; struct vb2_queue queue;
We are now able to configure a pipeline directly into a local display list body. Take advantage of this fact, and create a cacheable body to store the configuration of the pipeline in the video object. vsp1_video_pipeline_run() is now the last user of the pipe->dl object. Convert this function to use the cached video->config body and obtain a local display list reference. Attach the video->config body to the display list when needed before committing to hardware. The pipe object is marked as un-configured when resuming from a suspend. This ensures that when the hardware is reset - our cached configuration will be re-attached to the next committed DL. Our video DL usage now looks like the below output: dl->body0 contains our disposable runtime configuration. Max 41. dl_child->body0 is our partition specific configuration. Max 12. dl->bodies shows our constant configuration and LUTs. These two are LUT/CLU: * dl->bodies[x]->num_entries 256 / max 256 * dl->bodies[x]->num_entries 4914 / max 4914 Which shows that our 'constant' configuration cache is currently utilised to a maximum of 64 entries. trace-cmd report | \ grep max | sed 's/.*vsp1_dl_list_commit://g' | sort | uniq; dl->body0->num_entries 13 / max 128 dl->body0->num_entries 14 / max 128 dl->body0->num_entries 16 / max 128 dl->body0->num_entries 20 / max 128 dl->body0->num_entries 27 / max 128 dl->body0->num_entries 34 / max 128 dl->body0->num_entries 41 / max 128 dl_child->body0->num_entries 10 / max 128 dl_child->body0->num_entries 12 / max 128 dl->bodies[x]->num_entries 15 / max 128 dl->bodies[x]->num_entries 16 / max 128 dl->bodies[x]->num_entries 17 / max 128 dl->bodies[x]->num_entries 18 / max 128 dl->bodies[x]->num_entries 20 / max 128 dl->bodies[x]->num_entries 21 / max 128 dl->bodies[x]->num_entries 256 / max 256 dl->bodies[x]->num_entries 31 / max 128 dl->bodies[x]->num_entries 32 / max 128 dl->bodies[x]->num_entries 39 / max 128 dl->bodies[x]->num_entries 40 / max 128 dl->bodies[x]->num_entries 47 / max 128 dl->bodies[x]->num_entries 48 / max 128 dl->bodies[x]->num_entries 4914 / max 4914 dl->bodies[x]->num_entries 55 / max 128 dl->bodies[x]->num_entries 56 / max 128 dl->bodies[x]->num_entries 63 / max 128 dl->bodies[x]->num_entries 64 / max 128 Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- v10: - Removed pipe->configured flag, and use pipe->state == VSP1_PIPELINE_STOPPED instead. v8: - Fix comments - Rename video->pipe_config -> video->stream_config v4: - Adjust pipe configured flag to be reset on resume rather than suspend - rename dl_child, dl_next v3: - 's/fragment/body/', 's/fragments/bodies/' - video dlb cache allocation increased from 2 to 3 dlbs drivers/media/platform/vsp1/vsp1_pipe.h | 3 +- drivers/media/platform/vsp1/vsp1_video.c | 67 +++++++++++++++---------- drivers/media/platform/vsp1/vsp1_video.h | 2 +- 3 files changed, 43 insertions(+), 29 deletions(-)