@@ -18,7 +18,6 @@
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU General Public License for more details.
-
#include "em28xx.h"
#include <linux/module.h>
@@ -47,7 +46,6 @@ MODULE_PARM_DESC(i2c_debug, "i2c debug message level (1: normal debug, 2: show I
"i2c: %s: " fmt, __func__, ## arg); \
} while (0)
-
/*
* Time in msecs to wait for i2c xfers to finish.
* 35ms is the maximum time a SMBUS device could wait when
@@ -91,7 +89,6 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
if (len < 1 || len > 4)
return -EOPNOTSUPP;
- BUG_ON(len < 1 || len > 4);
b2[5] = 0x80 + len - 1;
b2[4] = addr;
b2[3] = buf[0];
@@ -125,7 +122,7 @@ static int em2800_i2c_send_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
ret);
return ret;
}
- msleep(5);
+ usleep_range(5000, 6000);
}
dprintk(0, "write to i2c device at 0x%x timed out\n", addr);
return -ETIMEDOUT;
@@ -172,14 +169,13 @@ static int em2800_i2c_recv_bytes(struct em28xx *dev, u8 addr, u8 *buf, u16 len)
ret);
return ret;
}
- msleep(5);
+ usleep_range(5000, 6000);
}
- if (ret != 0x84 + len - 1) {
+ if (ret != 0x84 + len - 1)
dprintk(0, "read from i2c device at 0x%x timed out\n", addr);
- }
/* get the received message */
- ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4-len, buf2, len);
+ ret = dev->em28xx_read_reg_req_len(dev, 0x00, 4 - len, buf2, len);
if (ret != len) {
dev_warn(&dev->intf->dev,
"reading from i2c device at 0x%x failed: couldn't get the received message from the bridge (error=%i)\n",
@@ -231,12 +227,11 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
"writing to i2c device at 0x%x failed (error=%i)\n",
addr, ret);
return ret;
- } else {
- dev_warn(&dev->intf->dev,
- "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
- len, addr, ret);
- return -EIO;
}
+ dev_warn(&dev->intf->dev,
+ "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
+ len, addr, ret);
+ return -EIO;
}
/* wait for completion */
@@ -255,7 +250,7 @@ static int em28xx_i2c_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
ret);
return ret;
}
- msleep(5);
+ usleep_range(5000, 6000);
/*
* NOTE: do we really have to wait for success ?
* Never seen anything else than 0x00 or 0x10
@@ -378,12 +373,12 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
"writing to i2c device at 0x%x failed (error=%i)\n",
addr, ret);
return ret;
- } else {
- dev_warn(&dev->intf->dev,
- "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
- len, addr, ret);
- return -EIO;
}
+
+ dev_warn(&dev->intf->dev,
+ "%i bytes write to i2c device at 0x%x requested, but %i bytes written\n",
+ len, addr, ret);
+ return -EIO;
}
/* Check success */
ret = dev->em28xx_read_reg_req(dev, 0x08, 0x0000);
@@ -393,7 +388,8 @@ static int em25xx_bus_B_send_bytes(struct em28xx *dev, u16 addr, u8 *buf,
*/
if (!ret)
return len;
- else if (ret > 0) {
+
+ if (ret > 0) {
dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret);
return -ENXIO;
}
@@ -447,7 +443,8 @@ static int em25xx_bus_B_recv_bytes(struct em28xx *dev, u16 addr, u8 *buf,
*/
if (!ret)
return len;
- else if (ret > 0) {
+
+ if (ret > 0) {
dprintk(1, "Bus B R08 returned 0x%02x: I2C ACK error\n", ret);
return -ENXIO;
}
@@ -535,13 +532,15 @@ static int em28xx_i2c_xfer(struct i2c_adapter *i2c_adap,
{
struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
struct em28xx *dev = i2c_bus->dev;
- unsigned bus = i2c_bus->bus;
+ unsigned int bus = i2c_bus->bus;
int addr, rc, i;
u8 reg;
- /* prevent i2c xfer attempts after device is disconnected
- some fe's try to do i2c writes/reads from their release
- interfaces when called in disconnect path */
+ /*
+ * prevent i2c xfer attempts after device is disconnected
+ * some fe's try to do i2c writes/reads from their release
+ * interfaces when called in disconnect path
+ */
if (dev->disconnected)
return -ENODEV;
@@ -624,12 +623,13 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
if (len == length) {
c = (char)len;
len = -1;
- } else
+ } else {
c = *buf++;
+ }
l = (l << 8) | c;
len++;
if ((len & (32 / 8 - 1)) == 0)
- hash = ((hash^l) * 0x9e370001UL);
+ hash = ((hash ^ l) * 0x9e370001UL);
} while (len);
return (hash >> (32 - bits)) & 0xffffffffUL;
@@ -639,7 +639,7 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
* Helper function to read data blocks from i2c clients with 8 or 16 bit
* address width, 8 bit register width and auto incrementation been activated
*/
-static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
+static int em28xx_i2c_read_block(struct em28xx *dev, unsigned int bus, u16 addr,
bool addr_w16, u16 len, u8 *data)
{
int remain = len, rsize, rsize_max, ret;
@@ -651,7 +651,8 @@ static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
/* Select address */
buf[0] = addr >> 8;
buf[1] = addr & 0xff;
- ret = i2c_master_send(&dev->i2c_client[bus], buf + !addr_w16, 1 + addr_w16);
+ ret = i2c_master_send(&dev->i2c_client[bus],
+ buf + !addr_w16, 1 + addr_w16);
if (ret < 0)
return ret;
/* Read data */
@@ -676,7 +677,7 @@ static int em28xx_i2c_read_block(struct em28xx *dev, unsigned bus, u16 addr,
return len;
}
-static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
+static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned int bus,
u8 **eedata, u16 *eedata_len)
{
const u16 len = 256;
@@ -704,7 +705,7 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
}
data = kzalloc(len, GFP_KERNEL);
- if (data == NULL)
+ if (!data)
return -ENOMEM;
/* Read EEPROM content */
@@ -796,7 +797,10 @@ static int em28xx_i2c_eeprom(struct em28xx *dev, unsigned bus,
return 0;
}
- /* TODO: decrypt eeprom data for camera bridges (em25xx, em276x+) */
+ /*
+ * TODO: decrypt eeprom data for camera bridges
+ * (em25xx, em276x+)
+ */
} else if (!dev->eeprom_addrwidth_16bit &&
data[0] == 0x1a && data[1] == 0xeb &&
@@ -886,8 +890,8 @@ static u32 functionality(struct i2c_adapter *i2c_adap)
{
struct em28xx_i2c_bus *i2c_bus = i2c_adap->algo_data;
- if ((i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX) ||
- (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B)) {
+ if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM28XX ||
+ i2c_bus->algo_type == EM28XX_I2C_ALGO_EM25XX_BUS_B) {
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
} else if (i2c_bus->algo_type == EM28XX_I2C_ALGO_EM2800) {
return (I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL) &
@@ -920,7 +924,7 @@ static const struct i2c_client em28xx_client_template = {
* incomplete list of known devices
*/
static char *i2c_devs[128] = {
- [0x1c >> 1] = "lgdt330x",
+ [0x1c >> 1] = "lgdt330x",
[0x3e >> 1] = "remote IR sensor",
[0x4a >> 1] = "saa7113h",
[0x52 >> 1] = "drxk",
@@ -943,7 +947,7 @@ static char *i2c_devs[128] = {
* do_i2c_scan()
* check i2c address range for devices
*/
-void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus)
+void em28xx_do_i2c_scan(struct em28xx *dev, unsigned int bus)
{
u8 i2c_devicelist[128];
unsigned char buf;
@@ -971,13 +975,14 @@ void em28xx_do_i2c_scan(struct em28xx *dev, unsigned bus)
* em28xx_i2c_register()
* register i2c bus
*/
-int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
+int em28xx_i2c_register(struct em28xx *dev, unsigned int bus,
enum em28xx_i2c_algo_type algo_type)
{
int retval;
- BUG_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg);
- BUG_ON(!dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req);
+ if (WARN_ON(!dev->em28xx_write_regs || !dev->em28xx_read_reg ||
+ !dev->em28xx_write_regs_req || !dev->em28xx_read_reg_req))
+ return -ENODEV;
if (bus >= NUM_I2C_BUSES)
return -ENODEV;
@@ -1004,8 +1009,9 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
/* Up to now, all eeproms are at bus 0 */
if (!bus) {
- retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
- if ((retval < 0) && (retval != -ENODEV)) {
+ retval = em28xx_i2c_eeprom(dev, bus,
+ &dev->eedata, &dev->eedata_len);
+ if (retval < 0 && retval != -ENODEV) {
dev_err(&dev->intf->dev,
"%s: em28xx_i2_eeprom failed! retval [%d]\n",
__func__, retval);
@@ -1022,7 +1028,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
* em28xx_i2c_unregister()
* unregister i2c_bus
*/
-int em28xx_i2c_unregister(struct em28xx *dev, unsigned bus)
+int em28xx_i2c_unregister(struct em28xx *dev, unsigned int bus)
{
if (bus >= NUM_I2C_BUSES)
return -ENODEV;
There are a number of coding style issues at em28xx-i2c. Fix most of them, by using checkpatch in strict mode to point for it. Automatic fixes were made with --fix-inplace, but those were complemented by manual work. Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- drivers/media/usb/em28xx/em28xx-i2c.c | 90 +++++++++++++++++++---------------- 1 file changed, 48 insertions(+), 42 deletions(-)