| Message ID | 4221809485a46dbf12b883a8207784553fd776a3.1464966020.git.roliveir@synopsys.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On Fri, Jun 03, 2016 at 06:36:40PM +0100, Ramiro Oliveira wrote: > From: roliveir <roliveir@synopsys.com> > > Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com> > --- > .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ > 1 file changed, 19 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > new file mode 100644 > index 0000000..5e4aa49 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > @@ -0,0 +1,19 @@ > +Omnivision OV5657 raw image sensor Still 5657? > +--------------------------------- > + > +OV5657 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces > +and CCI (I2C compatible) control bus. > + > +Required properties: > + > +- compatible : "ov5647"; Needs vendor prefix? > +- reg : I2C slave address of the sensor; What happened to the clocks property. I'm pretty sure the driver always needs to know the input clock freq. > + > +The common video interfaces bindings (see video-interfaces.txt) should be > +used to specify link to the image data receiver. The OV5647 device > +node should contain one 'port' child node with an 'endpoint' subnode. > + > +Following properties are valid for the endpoint node: > + > +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in > + video-interfaces.txt. The sensor supports only two data lanes. > -- > 2.8.1 > > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 06-06-2016 15:38, Rob Herring wrote: > On Fri, Jun 03, 2016 at 06:36:40PM +0100, Ramiro Oliveira wrote: >> From: roliveir <roliveir@synopsys.com> >> >> Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com> >> --- >> .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ >> 1 file changed, 19 insertions(+) >> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt >> >> diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt >> new file mode 100644 >> index 0000000..5e4aa49 >> --- /dev/null >> +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt >> @@ -0,0 +1,19 @@ >> +Omnivision OV5657 raw image sensor > Still 5657? Sorry, I thought I had changed it. >> +--------------------------------- >> + >> +OV5657 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces >> +and CCI (I2C compatible) control bus. >> + >> +Required properties: >> + >> +- compatible : "ov5647"; > Needs vendor prefix? I'll add the ovti prefix >> +- reg : I2C slave address of the sensor; > What happened to the clocks property. I'm pretty sure the driver always > needs to know the input clock freq. I've seen some drivers that don't make any reference to clock freq, but I can add it, if you think it's necessary. >> + >> +The common video interfaces bindings (see video-interfaces.txt) should be >> +used to specify link to the image data receiver. The OV5647 device >> +node should contain one 'port' child node with an 'endpoint' subnode. >> + >> +Following properties are valid for the endpoint node: >> + >> +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in >> + video-interfaces.txt. The sensor supports only two data lanes. >> -- >> 2.8.1 >> >> Regards, Ramiro -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 0000000..5e4aa49 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,19 @@ +Omnivision OV5657 raw image sensor +--------------------------------- + +OV5657 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ov5647"; +- reg : I2C slave address of the sensor; + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Following properties are valid for the endpoint node: + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. The sensor supports only two data lanes.