diff -r b6b82258cf5e linux/drivers/media/video/em28xx/em28xx-cards.c
--- a/linux/drivers/media/video/em28xx/em28xx-cards.c	Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/em28xx/em28xx-cards.c	Sat Jan 09 11:26:13 2010 -0800
@@ -122,13 +122,31 @@
 };
 #endif
 
+/* Kworld 315U
+   GPIO0 - Enable digital power (lgdt3303) - low to enable
+   GPIO1 - Enable analog power (saa7113/emp202) - low to enable
+   GPIO7 - enables something ?
+   GOP2  - ?? some sort of reset ?
+   GOP3  - lgdt3303 reset
+ */
 /* Board - EM2882 Kworld 315U digital */
 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = {
-	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
-	{EM28XX_R08_GPIO,	0xfe,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x7e,	0xff,		10},
 	{EM2880_R04_GPO,	0x04,	0xff,		10},
 	{EM2880_R04_GPO,	0x0c,	0xff,		10},
-	{EM28XX_R08_GPIO,	0x7e,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+/* Board - EM2882 Kworld 315U analog1 analog tv */
+static struct em28xx_reg_seq em2882_kworld_315u_analog1[] = {
+	{EM28XX_R08_GPIO,	0xfd,	0xff,		10},
+	{EM28XX_R08_GPIO,	0x7d,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
+/* Board - EM2882 Kworld 315U analog2 component/svideo */
+static struct em28xx_reg_seq em2882_kworld_315u_analog2[] = {
+	{EM28XX_R08_GPIO,	0xfd,	0xff,		10},
 	{  -1,			-1,	-1,		-1},
 };
 
@@ -140,6 +158,14 @@
 	{  -1,			-1,	-1,		-1},
 };
 
+/* Board - EM2882 Kworld 315U suspend */
+static struct em28xx_reg_seq em2882_kworld_315u_suspend[] = {
+	{EM28XX_R08_GPIO,	0xff,	0xff,		10},
+	{EM2880_R04_GPO,	0x08,	0xff,		10},
+	{EM2880_R04_GPO,	0x0c,	0xff,		10},
+	{  -1,			-1,	-1,		-1},
+};
+
 static struct em28xx_reg_seq kworld_330u_analog[] = {
 	{EM28XX_R08_GPIO,	0x6d,	~EM_GPIO_4,	10},
 	{EM2880_R04_GPO,	0x00,	0xff,		10},
@@ -1314,28 +1340,28 @@
 		.decoder	= EM28XX_SAA711X,
 		.has_dvb	= 1,
 		.dvb_gpio	= em2882_kworld_315u_digital,
+		.suspend_gpio	= em2882_kworld_315u_suspend,
 		.xclk		= EM28XX_XCLK_FREQUENCY_12MHZ,
 		.i2c_speed	= EM28XX_I2C_CLK_WAIT_ENABLE,
-		/* Analog mode - still not ready */
-		/*.input        = { {
+		.input        = { {
 			.type = EM28XX_VMUX_TELEVISION,
 			.vmux = SAA7115_COMPOSITE2,
 			.amux = EM28XX_AMUX_VIDEO,
-			.gpio = em2882_kworld_315u_analog,
+			.gpio = em2882_kworld_315u_analog1,
 			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type = EM28XX_VMUX_COMPOSITE1,
 			.vmux = SAA7115_COMPOSITE0,
 			.amux = EM28XX_AMUX_LINE_IN,
-			.gpio = em2882_kworld_315u_analog1,
+			.gpio = em2882_kworld_315u_analog2,
 			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
 		}, {
 			.type = EM28XX_VMUX_SVIDEO,
 			.vmux = SAA7115_SVIDEO3,
 			.amux = EM28XX_AMUX_LINE_IN,
-			.gpio = em2882_kworld_315u_analog1,
+			.gpio = em2882_kworld_315u_analog2,
 			.aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO,
-		} }, */
+		} }, 
 	},
 	[EM2880_BOARD_EMPIRE_DUAL_TV] = {
 		.name = "Empire dual TV",
diff -r b6b82258cf5e linux/drivers/media/video/em28xx/em28xx-core.c
--- a/linux/drivers/media/video/em28xx/em28xx-core.c	Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/em28xx/em28xx-core.c	Sat Jan 09 11:26:13 2010 -0800
@@ -1132,6 +1132,7 @@
  */
 void em28xx_wake_i2c(struct em28xx *dev)
 {
+	v4l2_device_call_all(&dev->v4l2_dev, 0, core,  s_power, 1);
 	v4l2_device_call_all(&dev->v4l2_dev, 0, core,  reset, 0);
 	v4l2_device_call_all(&dev->v4l2_dev, 0, video, s_routing,
 			INPUT(dev->ctl_input)->vmux, 0, 0);
diff -r b6b82258cf5e linux/drivers/media/video/saa7115.c
--- a/linux/drivers/media/video/saa7115.c	Thu Dec 31 19:14:54 2009 -0200
+++ b/linux/drivers/media/video/saa7115.c	Sat Jan 09 11:26:13 2010 -0800
@@ -1338,6 +1338,59 @@
 	return 0;
 }
 
+static int saa711x_s_power(struct v4l2_subdev *sd, int val)
+{
+	struct saa711x_state *state = to_state(sd);
+
+	if(val > 1 || val < 0)
+		return -EINVAL;
+
+	/* There really isn't a way to put the chip into power saving 
+		other than by pulling CE to ground so all we do is return
+		out of this function
+	*/
+	if(val == 0)
+		return 0;
+
+	/* When enabling the chip again we need to reinitialize the 
+		all the values
+	*/
+	state->input = -1;
+	state->output = SAA7115_IPORT_ON;
+	state->enable = 1;
+	state->radio = 0;
+	state->bright = 128;
+	state->contrast = 64;
+	state->hue = 0;
+	state->sat = 64;
+
+	state->audclk_freq = 48000;
+
+	v4l2_dbg(1, debug, sd, "writing init values s_power\n");
+
+	/* init to 60hz/48khz */
+	state->crystal_freq = SAA7115_FREQ_24_576_MHZ;
+	switch (state->ident) {
+	case V4L2_IDENT_SAA7111:
+		saa711x_writeregs(sd, saa7111_init);
+		break;
+	case V4L2_IDENT_SAA7113:
+		saa711x_writeregs(sd, saa7113_init);
+		break;
+	default:
+		state->crystal_freq = SAA7115_FREQ_32_11_MHZ;
+		saa711x_writeregs(sd, saa7115_init_auto_input);
+	}
+	if (state->ident != V4L2_IDENT_SAA7111)
+		saa711x_writeregs(sd, saa7115_init_misc);
+	saa711x_set_v4lstd(sd, V4L2_STD_NTSC);
+
+	v4l2_dbg(1, debug, sd, "status: (1E) 0x%02x, (1F) 0x%02x\n",
+		saa711x_read(sd, R_1E_STATUS_BYTE_1_VD_DEC),
+		saa711x_read(sd, R_1F_STATUS_BYTE_2_VD_DEC));
+	return 0;
+}
+
 static int saa711x_reset(struct v4l2_subdev *sd, u32 val)
 {
 	v4l2_dbg(1, debug, sd, "decoder RESET\n");
@@ -1513,6 +1566,7 @@
 	.s_std = saa711x_s_std,
 	.reset = saa711x_reset,
 	.s_gpio = saa711x_s_gpio,
+	.s_power = saa711x_s_power,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = saa711x_g_register,
 	.s_register = saa711x_s_register,
