@@ -112,7 +112,7 @@
sub tda10046 {
my $sourcefile = "TT_PCI_2.19h_28_11_2006.zip";
- my $url = "http://technotrend-online.com/download/software/219/$sourcefile";
+ my $url = "http://www.tt-download.com/download/updates/219/$sourcefile";
my $hash = "6a7e1e2f2644b162ff0502367553c72d";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
@@ -129,8 +129,8 @@
}
sub tda10046lifeview {
- my $sourcefile = "Drv_2.11.02.zip";
- my $url = "http://www.lifeview.com.tw/drivers/pci_card/FlyDVB-T/$sourcefile";
+ my $sourcefile = "7%5Cdrv_2.11.02.zip";
+ my $url = "http://www.lifeview.hk/dbimages/document/$sourcefile";
my $hash = "1ea24dee4eea8fe971686981f34fd2e0";
my $outfile = "dvb-fe-tda10046.fw";
my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
-----BEGIN PGP SIGNED MESSAGE----- Hash: SHA1 Hi, its my first post, and my first patch, my first try, so probably iḿ going to make big mistakes. Dont be cruel. I corrected urls in get_dvb_firmware, from linux-source-2.6.29, so iḿ going to suggest a patch Trying to configure the NPG REAL DVB-T PCI ttp://www.npgtech.com/producto_info.asp?idProducto=98 lspci -vnn output 03:06.0 Multimedia video controller [0400]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [14f1:8800] (rev 05) Subsystem: Conexant Systems, Inc. Conexant DVB-T reference design [14f1:0187] Flags: medium devsel, IRQ 20 Memory at fa000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [44] Vital Product Data Capabilities: [4c] Power Management version 2 03:06.2 Multimedia controller [0480]: Conexant Systems, Inc. CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] [14f1:8802] (rev 05) Subsystem: Conexant Systems, Inc. Conexant DVB-T reference design [14f1:0187] Flags: medium devsel, IRQ 20 Memory at fb000000 (32-bit, non-prefetchable) [size=16M] Capabilities: [4c] Power Management version 2 Video input working, and lirc input not checked, with insmod c88xx card=51 i2c_scan=1 dmesg output cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded cx88[0]: subsystem: 14f1:0187, board: WinFast DTV2000 H [card=51,insmod option], frontend(s): 1 cx88[0]: TV tuner type 5, Radio tuner type -1 tuner' 1-0043: chip found @ 0x86 (cx88[0]) tda9887 1-0043: creating new instance tda9887 1-0043: tda988[5/6/7] found All bytes are equal. It is not a TEA5767 tuner' 1-0060: chip found @ 0xc0 (cx88[0]) tuner-simple 1-0060: creating new instance tuner-simple 1-0060: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) input: cx88 IR (WinFast DTV2000 H) as /devices/pci0000:00/0000:00:14.4/0000:03:06.2/input/input8 cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:03:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[0]/2: found at 0000:03:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfb000000 IRQ 20/cx88[0]: IRQF_DISABLED is not guaranteed on shared IRQs tuner seems to be a philips tda1004x, supported in saa7134 chips in board are conexant cx23881-19 , as pci bridge conexant cx22702-25 , as frontend philips tda6651, inside tuner as mixer according to datasheets So, my newy questions, is anybody working to port this tuner, i will try but unsure. I prefer send hardware to a real developer. Thanks -----BEGIN PGP SIGNATURE----- Version: GnuPG v1.4.9 (GNU/Linux) Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org iEYEARECAAYFAknYR8oACgkQ5c4hZyE8gm9cHgCgvhdSt+Wa4jvjo+uKb98xdC4J oicAn0nrJEs0evuqYY3MsdHWuINZfUwz =/Ffq -----END PGP SIGNATURE-----