changeset: 13169:ad3ae870a7a0
tag: tip
user: David T.L. Wong <davidtlwong@gmail.com>
date: Mon Oct 26 20:33:49 2009 +0800
summary: cxusb: add card Mygica D689 DMB-TH
@@ -36,9 +36,11 @@
#include "tuner-xc2028.h"
#include "tuner-simple.h"
#include "mxl5005s.h"
+#include "max2165.h"
#include "dib7000p.h"
#include "dib0070.h"
#include "lgs8gxx.h"
+#include "atbm8830.h"
/* debug */
static int dvb_usb_cxusb_debug;
@@ -709,6 +711,11 @@
.AgcMasterByte = 0x00,
};
+static struct max2165_config mygica_d689_max2165_cfg = {
+ .i2c_address = 0x60,
+ .osc_clk = 20
+};
+
/* Callbacks for DVB USB */
static int cxusb_fmd1216me_tuner_attach(struct dvb_usb_adapter *adap)
{
@@ -808,6 +815,14 @@
return (fe == NULL) ? -EIO : 0;
}
+static int cxusb_mygica_d689_tuner_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_frontend *fe;
+ fe = dvb_attach(max2165_attach, adap->fe,
+ &adap->dev->i2c_adap, &mygica_d689_max2165_cfg);
+ return (fe == NULL) ? -EIO : 0;
+}
+
static int cxusb_cx22702_frontend_attach(struct dvb_usb_adapter *adap)
{
u8 b;
@@ -1155,6 +1170,64 @@
return 0;
}
+static struct atbm8830_config mygica_d689_atbm8830_cfg = {
+ .prod = ATBM8830_PROD_8830,
+ .demod_address = 0x40,
+ .serial_ts = 0,
+ .ts_sampling_edge = 1,
+ .ts_clk_gated = 0,
+ .osc_clk_freq = 30400, /* in kHz */
+ .if_freq = 0, /* zero IF */
+ .zif_swap_iq = 1,
+};
+
+static int cxusb_mygica_d689_frontend_attach(struct dvb_usb_adapter *adap)
+{
+ struct dvb_usb_device *d = adap->dev;
+ int n;
+
+ /* Select required USB configuration */
+ if (usb_set_interface(d->udev, 0, 0) < 0)
+ err("set interface failed");
+
+ /* Unblock all USB pipes */
+ usb_clear_halt(d->udev,
+ usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+ usb_clear_halt(d->udev,
+ usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint));
+ usb_clear_halt(d->udev,
+ usb_rcvbulkpipe(d->udev, d->props.adapter[0].stream.endpoint));
+
+#if 0
+ /* Drain USB pipes to avoid hang after reboot */
+ for (n = 0; n < 5; n++) {
+ cxusb_d680_dmb_drain_message(d);
+ cxusb_d680_dmb_drain_video(d);
+ msleep(200);
+ }
+#endif
+
+ /* Reset the tuner */
+ if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 0) < 0) {
+ err("clear tuner gpio failed");
+ return -EIO;
+ }
+ msleep(100);
+ if (cxusb_d680_dmb_gpio_tuner(d, 0x07, 1) < 0) {
+ err("set tuner gpio failed");
+ return -EIO;
+ }
+ msleep(100);
+
+ /* Attach frontend */
+ adap->fe = dvb_attach(atbm8830_attach, &mygica_d689_atbm8830_cfg,
+ &d->i2c_adap);
+ if (adap->fe == NULL)
+ return -EIO;
+
+ return 0;
+}
+
/*
* DViCO has shipped two devices with the same USB ID, but only one of them
* needs a firmware download. Check the device class details to see if they
@@ -1235,6 +1308,7 @@
static struct dvb_usb_device_properties cxusb_bluebird_nano2_needsfirmware_properties;
static struct dvb_usb_device_properties cxusb_aver_a868r_properties;
static struct dvb_usb_device_properties cxusb_d680_dmb_properties;
+static struct dvb_usb_device_properties cxusb_mygica_d689_properties;
static int cxusb_probe(struct usb_interface *intf,
const struct usb_device_id *id)
@@ -1263,6 +1337,8 @@
THIS_MODULE, NULL, adapter_nr) ||
0 == dvb_usb_device_init(intf, &cxusb_d680_dmb_properties,
THIS_MODULE, NULL, adapter_nr) ||
+ 0 == dvb_usb_device_init(intf, &cxusb_mygica_d689_properties,
+ THIS_MODULE, NULL, adapter_nr) ||
0)
return 0;
@@ -1289,6 +1365,7 @@
{ USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_A868R) },
{ USB_DEVICE(USB_VID_DVICO, USB_PID_DVICO_BLUEBIRD_DUAL_4_REV_2) },
{ USB_DEVICE(USB_VID_CONEXANT, USB_PID_CONEXANT_D680_DMB) },
+ { USB_DEVICE(USB_VID_CONEXANT, USB_PID_MYGICA_D689) },
{} /* Terminating entry */
};
MODULE_DEVICE_TABLE (usb, cxusb_table);
@@ -1832,6 +1909,55 @@
}
};
+static struct dvb_usb_device_properties cxusb_mygica_d689_properties = {
+ .caps = DVB_USB_IS_AN_I2C_ADAPTER,
+
+ .usb_ctrl = CYPRESS_FX2,
+
+ .size_of_priv = sizeof(struct cxusb_state),
+
+ .num_adapters = 1,
+ .adapter = {
+ {
+ .streaming_ctrl = cxusb_d680_dmb_streaming_ctrl,
+ .frontend_attach = cxusb_mygica_d689_frontend_attach,
+ .tuner_attach = cxusb_mygica_d689_tuner_attach,
+
+ /* parameter for the MPEG2-data transfer */
+ .stream = {
+ .type = USB_BULK,
+ .count = 5,
+ .endpoint = 0x02,
+ .u = {
+ .bulk = {
+ .buffersize = 8192,
+ }
+ }
+ },
+ },
+ },
+
+ .power_ctrl = cxusb_d680_dmb_power_ctrl,
+
+ .i2c_algo = &cxusb_i2c_algo,
+
+ .generic_bulk_ctrl_endpoint = 0x01,
+
+ .rc_interval = 100,
+ .rc_key_map = d680_dmb_rc_keys,
+ .rc_key_map_size = ARRAY_SIZE(d680_dmb_rc_keys),
+ .rc_query = cxusb_d680_dmb_rc_query,
+
+ .num_device_descs = 1,
+ .devices = {
+ {
+ "Mygica D689 DMB-TH",
+ { NULL },
+ { &cxusb_table[19], NULL },
+ },
+ }
+};
+
static struct usb_driver cxusb_driver = {
.name = "dvb_usb_cxusb",
.probe = cxusb_probe,
@@ -279,5 +279,6 @@
#define USB_PID_DVB_T_USB_STICK_HIGH_SPEED_WARM 0x5001
#define USB_PID_FRIIO_WHITE 0x0001
#define USB_PID_TVWAY_PLUS 0x0002
+#define USB_PID_MYGICA_D689 0xd811
#endif