diff mbox

Linux testers wanted for Genius iSlim 310

Message ID 4B86191E.4010706@freemail.hu (mailing list archive)
State RFC
Headers show

Commit Message

Németh Márton Feb. 25, 2010, 6:30 a.m. UTC
None
diff mbox

Patch

diff -r dfa82cf98a85 linux/drivers/media/video/gspca/pac7302.c
--- a/linux/drivers/media/video/gspca/pac7302.c	Sat Jan 30 20:03:02 2010 +0100
+++ b/linux/drivers/media/video/gspca/pac7302.c	Sun Jan 31 11:08:21 2010 +0100
@@ -96,6 +96,7 @@ 
 	u8 flags;
 #define FL_HFLIP 0x01		/* mirrored by default */
 #define FL_VFLIP 0x02		/* vertical flipped by default */
+#define FL_EXPERIMENTAL 0x80	/* USB IDs based on heuristic without any known product */

 	u8 sof_read;
 	u8 autogain_ignore_frames;
@@ -1220,17 +1221,33 @@ 
 };

 /* -- module initialisation -- */
+/* Note on FL_EXPERIMENTAL:
+ * On the schematics in PixArt PAC7301/PAC7302 datasheet
+ * (http://www.pixart.com.tw/upload/PAC7301_7302%20%20Spec%20V1_20091228174030.pdf)
+ * pages 19, 20, 21 and 22 there is a note titled "PID IO_TRAP" which describes
+ * the possible product ID range 0x2620..0x262f. In this range there are some
+ * known webcams, however, there are some PIDs with unknown or future devices.
+ * Because PixArt PAC7301/PAC7302 is a System on a Chip (SoC) device is is
+ * probable that this driver will work correctly independent of the used PID.
+ */
 static const struct usb_device_id device_table[] __devinitconst = {
 	{USB_DEVICE(0x06f8, 0x3009)},
 	{USB_DEVICE(0x093a, 0x2620)},
 	{USB_DEVICE(0x093a, 0x2621)},
 	{USB_DEVICE(0x093a, 0x2622), .driver_info = FL_VFLIP},
+	{USB_DEVICE(0x093a, 0x2623), .driver_info = FL_EXPERIMENTAL },
 	{USB_DEVICE(0x093a, 0x2624), .driver_info = FL_VFLIP},
+	{USB_DEVICE(0x093a, 0x2625), .driver_info = FL_EXPERIMENTAL },
 	{USB_DEVICE(0x093a, 0x2626)},
+	{USB_DEVICE(0x093a, 0x2627), .driver_info = FL_EXPERIMENTAL },
 	{USB_DEVICE(0x093a, 0x2628)},
 	{USB_DEVICE(0x093a, 0x2629), .driver_info = FL_VFLIP},
 	{USB_DEVICE(0x093a, 0x262a)},
+	{USB_DEVICE(0x093a, 0x262b), .driver_info = FL_EXPERIMENTAL },
 	{USB_DEVICE(0x093a, 0x262c)},
+	{USB_DEVICE(0x093a, 0x262d), .driver_info = FL_EXPERIMENTAL },
+	{USB_DEVICE(0x093a, 0x262e), .driver_info = FL_EXPERIMENTAL },
+	{USB_DEVICE(0x093a, 0x262f), .driver_info = FL_EXPERIMENTAL },
 	{}
 };
 MODULE_DEVICE_TABLE(usb, device_table);
@@ -1239,6 +1256,17 @@ 
 static int __devinit sd_probe(struct usb_interface *intf,
 			const struct usb_device_id *id)
 {
+	if ((u8)id->driver_info & FL_EXPERIMENTAL) {
+		PDEBUG(D_ERR | D_PROBE, "WARNING: USB device ID %04x:%04x is "
+			"not known, but based on some heuristics this driver "
+			"tries to handle it.",
+			id->idVendor, id->idProduct);
+		PDEBUG(D_ERR | D_PROBE, "WARNING: Plase send an email to "
+			"linux-media@vger.kernel.org with 'lsusb -v' output, "
+			"the vendor and name of the product and whether the "
+			"device is working or not.");
+	}
+
 	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
 				THIS_MODULE);
 }