Hauppauge HVR-2200 analog

Commit Message

Julian Scheel Jan. 4, 2011, 2:19 a.m. UTC

None

Patch

diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-cards.c
--- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-cards.c	2010-12-29 02:05:48.000000000 +0100
+++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-cards.c	2011-01-04 02:26:56.000000000 +0100
@@ -203,6 +203,66 @@ 
 			.i2c_reg_len	= REGLEN_8bit,
 		} },
 	},
+	[SAA7164_BOARD_HAUPPAUGE_HVR2200_4] = {
+		.name		= "Hauppauge WinTV-HVR2200",
+		.porta		= SAA7164_MPEG_DVB,
+		.portb		= SAA7164_MPEG_DVB,
+                .portc          = SAA7164_MPEG_ENCODER,
+                .portd          = SAA7164_MPEG_ENCODER,
+                .porte          = SAA7164_MPEG_VBI,
+                .portf          = SAA7164_MPEG_VBI,
+		.chiprev	= SAA7164_CHIP_REV3,
+		.unit		= {{
+			.id		= 0x1d,
+			.type		= SAA7164_UNIT_EEPROM,
+			.name		= "4K EEPROM",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_0,
+			.i2c_bus_addr	= 0xa0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x04,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x05,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1b,
+			.type		= SAA7164_UNIT_TUNER,
+			.name		= "TDA18271-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0xc0 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1c,
+			.type		= SAA7164_UNIT_ANALOG_DEMODULATOR,
+			.name		= "TDA8290-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x84 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1e,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-1",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_1,
+			.i2c_bus_addr	= 0x10 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		}, {
+			.id		= 0x1f,
+			.type		= SAA7164_UNIT_DIGITAL_DEMODULATOR,
+			.name		= "TDA10048-2",
+			.i2c_bus_nr	= SAA7164_I2C_BUS_2,
+			.i2c_bus_addr	= 0x12 >> 1,
+			.i2c_reg_len	= REGLEN_8bit,
+		} },
+	},
 	[SAA7164_BOARD_HAUPPAUGE_HVR2250] = {
 		.name		= "Hauppauge WinTV-HVR2250",
 		.porta		= SAA7164_MPEG_DVB,
@@ -426,6 +486,10 @@ 
 		.subvendor = 0x0070,
 		.subdevice = 0x8851,
 		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2250_2,
+	}, {
+		.subvendor = 0x0070,
+		.subdevice = 0x8940,
+		.card      = SAA7164_BOARD_HAUPPAUGE_HVR2200_4,
 	},
 };
 const unsigned int saa7164_idcount = ARRAY_SIZE(saa7164_subids);
@@ -469,6 +533,7 @@ 
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
@@ -549,6 +614,7 @@ 
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2250_3:
Nur in linux-2.6.37-rc8/drivers/media/video/saa7164/: saa7164-cards.c.rej.
diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-dvb.c
--- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-dvb.c	2010-12-29 02:05:48.000000000 +0100
+++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-dvb.c	2011-01-04 02:23:35.000000000 +0100
@@ -475,6 +475,7 @@ 
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_2:
 	case SAA7164_BOARD_HAUPPAUGE_HVR2200_3:
+	case SAA7164_BOARD_HAUPPAUGE_HVR2200_4:
 		i2c_bus = &dev->i2c_bus[port->nr + 1];
 		switch (port->nr) {
 		case 0:
diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-encoder.c
--- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164-encoder.c	2010-12-29 02:05:48.000000000 +0100
+++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164-encoder.c	2011-01-04 03:05:30.000000000 +0100
@@ -32,7 +32,10 @@ 
 	}, {
 		.name      = "NTSC-JP",
 		.id        = V4L2_STD_NTSC_M_JP,
-	}
+	}, {
+                .name      = "PAL-B",
+                .id        = V4L2_STD_PAL_B,
+        }
 };
 
 static const u32 saa7164_v4l2_ctrls[] = {
diff -ru -x '*.o*' -x '*.ko*' -x '*.cmd' -x '*.orig' linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164.h
--- linux-2.6.37-rc8.a/drivers/media/video/saa7164//saa7164.h	2010-12-29 02:05:48.000000000 +0100
+++ linux-2.6.37-rc8/drivers/media/video/saa7164//saa7164.h	2011-01-04 02:23:35.000000000 +0100
@@ -83,6 +83,7 @@ 
 #define SAA7164_BOARD_HAUPPAUGE_HVR2200_3	6
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_2	7
 #define SAA7164_BOARD_HAUPPAUGE_HVR2250_3	8
+#define SAA7164_BOARD_HAUPPAUGE_HVR2200_4	9
 
 #define SAA7164_MAX_UNITS		8
 #define SAA7164_TS_NUMBER_OF_LINES	312
Nur in linux-2.6.37-rc8/drivers/media/video/saa7164/: saa7164.mod.c.