@@ -18,6 +18,8 @@
#include <linux/input.h>
#include <linux/i2c.h>
#include <linux/usb/r8a66597.h>
+#include <media/soc_camera.h>
+#include <media/sh_mobile_ceu.h>
#include <video/sh_mobile_lcdc.h>
#include <asm/clock.h>
#include <asm/machvec.h>
@@ -212,11 +214,131 @@ static struct platform_device kfr2r09_usb0_gadget_device = {
.resource = kfr2r09_usb0_gadget_resources,
};
+static struct sh_mobile_ceu_info sh_mobile_ceu_info = {
+ .flags = SH_CEU_FLAG_USE_8BIT_BUS,
+};
+
+static struct resource kfr2r09_ceu_resources[] = {
+ [0] = {
+ .name = "CEU",
+ .start = 0xfe910000,
+ .end = 0xfe91009f,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = 52,
+ .end = 52,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ /* place holder for contiguous memory */
+ },
+};
+
+static struct platform_device kfr2r09_ceu_device = {
+ .name = "sh_mobile_ceu",
+ .id = 0, /* "ceu0" clock */
+ .num_resources = ARRAY_SIZE(kfr2r09_ceu_resources),
+ .resource = kfr2r09_ceu_resources,
+ .dev = {
+ .platform_data = &sh_mobile_ceu_info,
+ },
+ .archdata = {
+ .hwblk_id = HWBLK_CEU0,
+ },
+};
+
+static struct i2c_board_info kfr2r09_i2c_camera = {
+ I2C_BOARD_INFO("rj54n1cb0c", 0x50),
+};
+
+static struct clk *camera_clk;
+
+#define DRVCRB 0xA405018C
+static int camera_power(struct device *dev, int mode)
+{
+ int ret;
+
+ if (mode) {
+ long rate;
+
+ camera_clk = clk_get(NULL, "video_clk");
+ if (IS_ERR(camera_clk))
+ return PTR_ERR(camera_clk);
+
+ /* set VIO_CKO clock to 25MHz */
+ rate = clk_round_rate(camera_clk, 25000000);
+ ret = clk_set_rate(camera_clk, rate);
+ if (ret < 0)
+ goto eclkrate;
+
+ /* set DRVCRB
+ *
+ * use 1.8 V for VccQ_VIO
+ * use 2.85V for VccQ_SR
+ */
+ ctrl_outw((ctrl_inw(DRVCRB) & ~0x0003) | 0x0001, DRVCRB);
+
+ /* reset clear */
+ ret = gpio_request(GPIO_PTB4, NULL);
+ if (ret < 0)
+ goto eptb4;
+ ret = gpio_request(GPIO_PTB7, NULL);
+ if (ret < 0)
+ goto eptb7;
+
+ ret = gpio_direction_output(GPIO_PTB4, 1);
+ if (!ret)
+ ret = gpio_direction_output(GPIO_PTB7, 1);
+ if (ret < 0)
+ goto egpioout;
+ msleep(1);
+
+ ret = clk_enable(camera_clk); /* start VIO_CKO */
+ if (ret < 0)
+ goto eclkon;
+
+ return 0;
+ }
+
+ ret = 0;
+
+ clk_disable(camera_clk);
+eclkon:
+ gpio_set_value(GPIO_PTB7, 0);
+egpioout:
+ gpio_set_value(GPIO_PTB4, 0);
+ gpio_free(GPIO_PTB7);
+eptb7:
+ gpio_free(GPIO_PTB4);
+eptb4:
+eclkrate:
+ clk_put(camera_clk);
+ return ret;
+}
+
+static struct soc_camera_link rj54n1_link = {
+ .power = camera_power,
+ .board_info = &kfr2r09_i2c_camera,
+ .i2c_adapter_id = 1,
+ .module_name = "rj54n1cb0c",
+};
+
+static struct platform_device kfr2r09_camera = {
+ .name = "soc-camera-pdrv",
+ .id = 0,
+ .dev = {
+ .platform_data = &rj54n1_link,
+ },
+};
+
static struct platform_device *kfr2r09_devices[] __initdata = {
&kfr2r09_nor_flash_device,
&kfr2r09_nand_flash_device,
&kfr2r09_sh_keysc_device,
&kfr2r09_sh_lcdc_device,
+ &kfr2r09_ceu_device,
+ &kfr2r09_camera,
};
#define BSC_CS0BCR 0xfec10004
@@ -361,6 +483,23 @@ static int __init kfr2r09_devices_setup(void)
if (kfr2r09_usb0_gadget_setup() == 0)
platform_device_register(&kfr2r09_usb0_gadget_device);
+ /* CEU */
+ gpio_request(GPIO_FN_VIO_CKO, NULL);
+ gpio_request(GPIO_FN_VIO0_CLK, NULL);
+ gpio_request(GPIO_FN_VIO0_VD, NULL);
+ gpio_request(GPIO_FN_VIO0_HD, NULL);
+ gpio_request(GPIO_FN_VIO0_FLD, NULL);
+ gpio_request(GPIO_FN_VIO0_D7, NULL);
+ gpio_request(GPIO_FN_VIO0_D6, NULL);
+ gpio_request(GPIO_FN_VIO0_D5, NULL);
+ gpio_request(GPIO_FN_VIO0_D4, NULL);
+ gpio_request(GPIO_FN_VIO0_D3, NULL);
+ gpio_request(GPIO_FN_VIO0_D2, NULL);
+ gpio_request(GPIO_FN_VIO0_D1, NULL);
+ gpio_request(GPIO_FN_VIO0_D0, NULL);
+
+ platform_resource_setup_memory(&kfr2r09_ceu_device, "ceu", 4 << 20);
+
return platform_add_devices(kfr2r09_devices,
ARRAY_SIZE(kfr2r09_devices));
}