diff mbox

[v6,3/6] rcar_vin: add devicetree support

Message ID Pine.LNX.4.64.1407232022050.1526@axis700.grange (mailing list archive)
State New, archived
Headers show

Commit Message

Guennadi Liakhovetski July 23, 2014, 6:23 p.m. UTC
Add support for devicetree probe for the rcar-vin
driver.

Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
[g.liakhovetski@gmx.de fix a typo, sort headers alphabetically]
Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
---

Ben, is this version ok?

 .../devicetree/bindings/media/rcar_vin.txt         | 86 ++++++++++++++++++++++
 drivers/media/platform/soc_camera/rcar_vin.c       | 72 ++++++++++++++++--
 2 files changed, 151 insertions(+), 7 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/media/rcar_vin.txt

Comments

Ben Dooks July 25, 2014, 7:30 a.m. UTC | #1
On 23/07/14 19:23, Guennadi Liakhovetski wrote:
> Add support for devicetree probe for the rcar-vin
> driver.
> 
> Signed-off-by: Ben Dooks <ben.dooks@codethink.co.uk>
> [g.liakhovetski@gmx.de fix a typo, sort headers alphabetically]
> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de>
> ---
> 
> Ben, is this version ok?

From looking at it, it seems ok.

I have been off work ill for the last couple of days, so have only
just seen these. I will try and get these reviewed/tests as soon
as possible.

Is there a git branch I could merge with our devel tree?
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/media/rcar_vin.txt b/Documentation/devicetree/bindings/media/rcar_vin.txt
new file mode 100644
index 0000000..ba61782
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/rcar_vin.txt
@@ -0,0 +1,86 @@ 
+Renesas RCar Video Input driver (rcar_vin)
+------------------------------------------
+
+The rcar_vin device provides video input capabilities for the Renesas R-Car
+family of devices. The current blocks are always slaves and suppot one input
+channel which can be either RGB, YUYV or BT656.
+
+ - compatible: Must be one of the following
+   - "renesas,vin-r8a7791" for the R8A7791 device
+   - "renesas,vin-r8a7790" for the R8A7790 device
+   - "renesas,vin-r8a7779" for the R8A7779 device
+   - "renesas,vin-r8a7778" for the R8A7778 device
+ - reg: the register base and size for the device registers
+ - interrupts: the interrupt for the device
+ - clocks: Reference to the parent clock
+
+Additionally, an alias named vinX will need to be created to specify
+which video input device this is.
+
+The per-board settings:
+ - port sub-node describing a single endpoint connected to the vin
+   as described in video-interfaces.txt[1]. Only the first one will
+   be considered as each vin interface has one input port.
+
+   These settings are used to work out video input format and widths
+   into the system.
+
+
+Device node example
+-------------------
+
+	aliases {
+	       vin0 = &vin0;
+	};
+
+        vin0: vin@0xe6ef0000 {
+                compatible = "renesas,vin-r8a7790";
+                clocks = <&mstp8_clks R8A7790_CLK_VIN0>;
+                reg = <0 0xe6ef0000 0 0x1000>;
+                interrupts = <0 188 IRQ_TYPE_LEVEL_HIGH>;
+                status = "disabled";
+        };
+
+Board setup example (vin1 composite video input)
+------------------------------------------------
+
+&i2c2   {
+        status = "ok";
+        pinctrl-0 = <&i2c2_pins>;
+        pinctrl-names = "default";
+
+        adv7180@20 {
+                compatible = "adi,adv7180";
+                reg = <0x20>;
+                remote = <&vin1>;
+
+                port {
+                        adv7180: endpoint {
+                                bus-width = <8>;
+                                remote-endpoint = <&vin1ep0>;
+                        };
+                };
+        };
+};
+
+/* composite video input */
+&vin1 {
+        pinctrl-0 = <&vin1_pins>;
+        pinctrl-names = "default";
+
+        status = "ok";
+
+        port {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                vin1ep0: endpoint {
+                        remote-endpoint = <&adv7180>;
+                        bus-width = <8>;
+                };
+        };
+};
+
+
+
+[1] video-interfaces.txt common video media interface
diff --git a/drivers/media/platform/soc_camera/rcar_vin.c b/drivers/media/platform/soc_camera/rcar_vin.c
index 7c4299d..85d579f 100644
--- a/drivers/media/platform/soc_camera/rcar_vin.c
+++ b/drivers/media/platform/soc_camera/rcar_vin.c
@@ -19,6 +19,8 @@ 
 #include <linux/io.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 #include <linux/platform_data/camera-rcar.h>
 #include <linux/platform_device.h>
 #include <linux/pm_runtime.h>
@@ -31,6 +33,7 @@ 
 #include <media/v4l2-dev.h>
 #include <media/v4l2-device.h>
 #include <media/v4l2-mediabus.h>
+#include <media/v4l2-of.h>
 #include <media/v4l2-subdev.h>
 #include <media/videobuf2-dma-contig.h>
 
@@ -1390,6 +1393,17 @@  static struct soc_camera_host_ops rcar_vin_host_ops = {
 	.init_videobuf2	= rcar_vin_init_videobuf2,
 };
 
+#ifdef CONFIG_OF
+static struct of_device_id rcar_vin_of_table[] = {
+	{ .compatible = "renesas,vin-r8a7791", .data = (void *)RCAR_GEN2 },
+	{ .compatible = "renesas,vin-r8a7790", .data = (void *)RCAR_GEN2 },
+	{ .compatible = "renesas,vin-r8a7779", .data = (void *)RCAR_H1 },
+	{ .compatible = "renesas,vin-r8a7778", .data = (void *)RCAR_M1 },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, rcar_vin_of_table);
+#endif
+
 static struct platform_device_id rcar_vin_id_table[] = {
 	{ "r8a7791-vin",  RCAR_GEN2 },
 	{ "r8a7790-vin",  RCAR_GEN2 },
@@ -1402,15 +1416,52 @@  MODULE_DEVICE_TABLE(platform, rcar_vin_id_table);
 
 static int rcar_vin_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *match = NULL;
 	struct rcar_vin_priv *priv;
 	struct resource *mem;
 	struct rcar_vin_platform_data *pdata;
+	unsigned int pdata_flags;
 	int irq, ret;
 
-	pdata = pdev->dev.platform_data;
-	if (!pdata || !pdata->flags) {
-		dev_err(&pdev->dev, "platform data not set\n");
-		return -EINVAL;
+	if (pdev->dev.of_node) {
+		struct v4l2_of_endpoint ep;
+		struct device_node *np;
+
+		match = of_match_device(of_match_ptr(rcar_vin_of_table),
+					&pdev->dev);
+
+		np = of_graph_get_next_endpoint(pdev->dev.of_node, NULL);
+		if (!np) {
+			dev_err(&pdev->dev, "could not find endpoint\n");
+			return -EINVAL;
+		}
+
+		ret = v4l2_of_parse_endpoint(np, &ep);
+		if (ret) {
+			dev_err(&pdev->dev, "could not parse endpoint\n");
+			return ret;
+		}
+
+		if (ep.bus_type == V4L2_MBUS_BT656)
+			pdata_flags = RCAR_VIN_BT656;
+		else {
+			pdata_flags = 0;
+			if (ep.bus.parallel.flags & V4L2_MBUS_HSYNC_ACTIVE_LOW)
+				pdata_flags |= RCAR_VIN_HSYNC_ACTIVE_LOW;
+			if (ep.bus.parallel.flags & V4L2_MBUS_VSYNC_ACTIVE_LOW)
+				pdata_flags |= RCAR_VIN_VSYNC_ACTIVE_LOW;
+		}
+
+		of_node_put(np);
+
+		dev_dbg(&pdev->dev, "pdata_flags = %08x\n", pdata_flags);
+	} else {
+		pdata = pdev->dev.platform_data;
+		if (!pdata || !pdata->flags) {
+			dev_err(&pdev->dev, "platform data not set\n");
+			return -EINVAL;
+		}
+		pdata_flags = pdata->flags;
 	}
 
 	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1441,12 +1492,18 @@  static int rcar_vin_probe(struct platform_device *pdev)
 
 	priv->ici.priv = priv;
 	priv->ici.v4l2_dev.dev = &pdev->dev;
-	priv->ici.nr = pdev->id;
 	priv->ici.drv_name = dev_name(&pdev->dev);
 	priv->ici.ops = &rcar_vin_host_ops;
 
-	priv->pdata_flags = pdata->flags;
-	priv->chip = pdev->id_entry->driver_data;
+	priv->pdata_flags = pdata_flags;
+	if (!match) {
+		priv->ici.nr = pdev->id;
+		priv->chip = pdev->id_entry->driver_data;
+	} else {
+		priv->ici.nr = of_alias_get_id(pdev->dev.of_node, "vin");
+		priv->chip = (enum chip_id)match->data;
+	};
+
 	spin_lock_init(&priv->lock);
 	INIT_LIST_HEAD(&priv->capture);
 
@@ -1487,6 +1544,7 @@  static struct platform_driver rcar_vin_driver = {
 	.driver		= {
 		.name		= DRV_NAME,
 		.owner		= THIS_MODULE,
+		.of_match_table	= of_match_ptr(rcar_vin_of_table),
 	},
 	.id_table	= rcar_vin_id_table,
 };