@@ -33,47 +33,6 @@
static u32
ref_count_mipi_allocation[N_CSI_PORTS]; /* Initialized in mipi_init */
-/*
- * Check if a source port or TPG/PRBS ID is valid
- */
-static bool ia_css_mipi_is_source_port_valid(struct ia_css_pipe *pipe,
- unsigned int *pport)
-{
- bool ret = true;
- unsigned int port = 0;
- unsigned int max_ports = 0;
-
- switch (pipe->stream->config.mode) {
- case IA_CSS_INPUT_MODE_BUFFERED_SENSOR:
- port = (unsigned int)pipe->stream->config.source.port.port;
- max_ports = N_CSI_PORTS;
- break;
- case IA_CSS_INPUT_MODE_TPG:
- port = (unsigned int)pipe->stream->config.source.tpg.id;
- max_ports = N_CSS_TPG_IDS;
- break;
- case IA_CSS_INPUT_MODE_PRBS:
- port = (unsigned int)pipe->stream->config.source.prbs.id;
- max_ports = N_CSS_PRBS_IDS;
- break;
- default:
- assert(false);
- ret = false;
- break;
- }
-
- if (ret) {
- assert(port < max_ports);
-
- if (port >= max_ports)
- ret = false;
- }
-
- *pport = port;
-
- return ret;
-}
-
/* Assumptions:
* - A line is multiple of 4 bytes = 1 word.
* - Each frame has SOF and EOF (each 1 word).
@@ -227,6 +186,10 @@ ia_css_mipi_frame_calculate_size(const unsigned int width,
return err;
}
+/*
+ * Check if a source port or TPG/PRBS ID is valid
+ */
+
#if !defined(ISP2401)
int
ia_css_mipi_frame_enable_check_on_size(const enum mipi_port_id port,
@@ -272,16 +235,20 @@ bool mipi_is_free(void)
return true;
}
-int
-calculate_mipi_buff_size(
- struct ia_css_stream_config *stream_cfg,
- unsigned int *size_mem_words)
+#if defined(ISP2401)
+/*
+ * @brief Calculate the required MIPI buffer sizes.
+ * Based on the stream configuration, calculate the
+ * required MIPI buffer sizes (in DDR words).
+ *
+ * @param[in] stream_cfg Point to the target stream configuration
+ * @param[out] size_mem_words MIPI buffer size in DDR words.
+ *
+ * @return
+ */
+static int calculate_mipi_buff_size(struct ia_css_stream_config *stream_cfg,
+ unsigned int *size_mem_words)
{
-#if !defined(ISP2401)
- int err = -EINVAL;
- (void)stream_cfg;
- (void)size_mem_words;
-#else
unsigned int width;
unsigned int height;
enum atomisp_input_format format;
@@ -373,26 +340,9 @@ calculate_mipi_buff_size(
*size_mem_words = mem_words_per_buff;
IA_CSS_LEAVE_ERR(err);
-#endif
return err;
}
-
-static bool buffers_needed(struct ia_css_pipe *pipe)
-{
- if (!IS_ISP2401) {
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR)
- return true;
- else
- return false;
- }
-
- if (pipe->stream->config.mode == IA_CSS_INPUT_MODE_BUFFERED_SENSOR ||
- pipe->stream->config.mode == IA_CSS_INPUT_MODE_TPG ||
- pipe->stream->config.mode == IA_CSS_INPUT_MODE_PRBS)
- return true;
-
- return false;
-}
+#endif
int
allocate_mipi_frames(struct ia_css_pipe *pipe,
@@ -422,45 +372,25 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
}
#endif
-
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
"allocate_mipi_frames(%p) exit: no buffers needed for pipe mode.\n",
pipe);
return 0; /* AM TODO: Check */
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
-
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ port = (unsigned int)pipe->stream->config.source.port.port;
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("allocate_mipi_frames(%p) exit: port is not correct (port=%d).",
pipe, port);
return -EINVAL;
}
#ifdef ISP2401
- err = calculate_mipi_buff_size(
- &pipe->stream->config,
- &my_css.mipi_frame_size[port]);
-#endif
-
-#if !defined(ISP2401)
- if (ref_count_mipi_allocation[port] != 0) {
- ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
- "allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n",
- pipe, port);
- return 0;
- }
-#else
- /* 2401 system allows multiple streams to use same physical port. This is not
+ err = calculate_mipi_buff_size(&pipe->stream->config,
+ &my_css.mipi_frame_size[port]);
+ /*
+ * 2401 system allows multiple streams to use same physical port. This is not
* true for 2400 system. Currently 2401 uses MIPI buffers as a temporary solution.
* TODO AM: Once that is changed (removed) this code should be removed as well.
* In that case only 2400 related code should remain.
@@ -472,6 +402,13 @@ allocate_mipi_frames(struct ia_css_pipe *pipe,
pipe, port);
return 0;
}
+#else
+ if (ref_count_mipi_allocation[port] != 0) {
+ ia_css_debug_dtrace(IA_CSS_DEBUG_TRACE_PRIVATE,
+ "allocate_mipi_frames(%p) exit: already allocated for this port (port=%d).\n",
+ pipe, port);
+ return 0;
+ }
#endif
ref_count_mipi_allocation[port]++;
@@ -552,23 +489,15 @@ free_mipi_frames(struct ia_css_pipe *pipe)
return -EINVAL;
}
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
IA_CSS_ERROR("free_mipi_frames(%p) exit: wrong mode.",
pipe);
return err;
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
+ port = (unsigned int)pipe->stream->config.source.port.port;
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("free_mipi_frames(%p, %d) exit: pipe port is not correct.",
pipe, port);
return err;
@@ -647,11 +576,7 @@ send_mipi_frames(struct ia_css_pipe *pipe)
{
int err = -EINVAL;
unsigned int i;
-#ifndef ISP2401
unsigned int port;
-#else
- unsigned int port = 0;
-#endif
IA_CSS_ENTER_PRIVATE("pipe=%p", pipe);
@@ -664,23 +589,15 @@ send_mipi_frames(struct ia_css_pipe *pipe)
/* multi stream video needs mipi buffers */
/* nothing to be done in other cases. */
- if (!buffers_needed(pipe)) {
+ if (pipe->stream->config.mode != IA_CSS_INPUT_MODE_BUFFERED_SENSOR) {
IA_CSS_LOG("nothing to be done for this mode");
return 0;
/* TODO: AM: maybe this should be returning an error. */
}
- if (!IS_ISP2401) {
- port = (unsigned int)pipe->stream->config.source.port.port;
- } else {
- /* Returns true if port is valid. So, invert it */
- err = !ia_css_mipi_is_source_port_valid(pipe, &port);
- }
+ port = (unsigned int)pipe->stream->config.source.port.port;
- assert(port < N_CSI_PORTS);
-
- if ((!IS_ISP2401 && port >= N_CSI_PORTS) ||
- (IS_ISP2401 && err)) {
+ if (port >= N_CSI_PORTS) {
IA_CSS_ERROR("send_mipi_frames(%p) exit: invalid port specified (port=%d).",
pipe, port);
return err;
@@ -34,19 +34,4 @@ free_mipi_frames(struct ia_css_pipe *pipe);
int
send_mipi_frames(struct ia_css_pipe *pipe);
-/**
- * @brief Calculate the required MIPI buffer sizes.
- * Based on the stream configuration, calculate the
- * required MIPI buffer sizes (in DDR words).
- *
- * @param[in] stream_cfg Point to the target stream configuration
- * @param[out] size_mem_words MIPI buffer size in DDR words.
- *
- * @return
- */
-int
-calculate_mipi_buff_size(
- struct ia_css_stream_config *stream_cfg,
- unsigned int *size_mem_words);
-
#endif /* __SH_CSS_MIPI_H */
With the ISP2401 firmware we're using, the code differences are not that much from ISP2400. Cleanup the code in order to make it closer to Intel Aero driver. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> --- To avoid mailbombing on a large number of people, only mailing lists were C/C on the cover. See [PATCH 00/13] at: https://lore.kernel.org/all/cover.1637140900.git.mchehab+huawei@kernel.org/ .../staging/media/atomisp/pci/sh_css_mipi.c | 159 +++++------------- .../staging/media/atomisp/pci/sh_css_mipi.h | 15 -- 2 files changed, 38 insertions(+), 136 deletions(-)