@@ -116,7 +116,7 @@ int picolcd_init_cir(struct picolcd_data *data, struct hid_report *report)
rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
rdev->open = picolcd_cir_open;
rdev->close = picolcd_cir_close;
- rdev->input_name = data->hdev->name;
+ rdev->device_name = data->hdev->name;
rdev->input_phys = data->hdev->phys;
rdev->input_id.bustype = data->hdev->bus;
rdev->input_id.vendor = data->hdev->vendor;
@@ -263,12 +263,12 @@ struct cec_adapter *cec_allocate_adapter(const struct cec_adap_ops *ops,
return ERR_PTR(-ENOMEM);
}
- snprintf(adap->input_name, sizeof(adap->input_name),
+ snprintf(adap->device_name, sizeof(adap->device_name),
"RC for %s", name);
snprintf(adap->input_phys, sizeof(adap->input_phys),
"%s/input0", name);
- adap->rc->input_name = adap->input_name;
+ adap->rc->device_name = adap->device_name;
adap->rc->input_phys = adap->input_phys;
adap->rc->input_id.bustype = BUS_CEC;
adap->rc->input_id.vendor = 0;
@@ -73,7 +73,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
strlcpy(coredev->ir.phys, coredev->devpath, sizeof(coredev->ir.phys));
strlcat(coredev->ir.phys, "/ir0", sizeof(coredev->ir.phys));
- dev->input_name = coredev->ir.name;
+ dev->device_name = coredev->ir.name;
dev->input_phys = coredev->ir.phys;
dev->dev.parent = coredev->device;
@@ -91,7 +91,7 @@ int sms_ir_init(struct smscore_device_t *coredev)
dev->driver_name = MODULE_NAME;
pr_debug("Input device (IR) %s is set for key events\n",
- dev->input_name);
+ dev->device_name);
err = rc_register_device(dev);
if (err < 0) {
@@ -452,7 +452,7 @@ static int ir_probe(struct i2c_client *client, const struct i2c_device_id *id)
*/
rc->input_id.bustype = BUS_I2C;
rc->input_phys = ir->phys;
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
/*
* Initialize the other fields of rc_dev
@@ -535,7 +535,7 @@ int bttv_input_init(struct bttv *btv)
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0",
pci_name(btv->c.pci));
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_PCI;
rc->input_id.version = 1;
@@ -351,7 +351,7 @@ int cx23885_input_init(struct cx23885_dev *dev)
}
kernel_ir->rc = rc;
- rc->input_name = kernel_ir->name;
+ rc->device_name = kernel_ir->name;
rc->input_phys = kernel_ir->phys;
rc->input_id.bustype = BUS_PCI;
rc->input_id.version = 1;
@@ -464,7 +464,7 @@ int cx88_ir_init(struct cx88_core *core, struct pci_dev *pci)
snprintf(ir->name, sizeof(ir->name), "cx88 IR (%s)", core->board.name);
snprintf(ir->phys, sizeof(ir->phys), "pci-%s/ir0", pci_name(pci));
- dev->input_name = ir->name;
+ dev->device_name = ir->name;
dev->input_phys = ir->phys;
dev->input_id.bustype = BUS_PCI;
dev->input_id.version = 1;
@@ -748,7 +748,7 @@ static int dm1105_ir_init(struct dm1105_dev *dm1105)
dev->driver_name = MODULE_NAME;
dev->map_name = RC_MAP_DM1105_NEC;
- dev->input_name = "DVB on-card IR receiver";
+ dev->device_name = "DVB on-card IR receiver";
dev->input_phys = dm1105->ir.input_phys;
dev->input_id.bustype = BUS_PCI;
dev->input_id.version = 1;
@@ -176,7 +176,7 @@ struct mantis_pci {
struct work_struct uart_work;
struct rc_dev *rc;
- char input_name[80];
+ char device_name[80];
char input_phys[80];
char *rc_map_name;
};
@@ -46,12 +46,12 @@ int mantis_input_init(struct mantis_pci *mantis)
goto out;
}
- snprintf(mantis->input_name, sizeof(mantis->input_name),
+ snprintf(mantis->device_name, sizeof(mantis->device_name),
"Mantis %s IR receiver", mantis->hwconfig->model_name);
snprintf(mantis->input_phys, sizeof(mantis->input_phys),
"pci-%s/ir0", pci_name(mantis->pdev));
- dev->input_name = mantis->input_name;
+ dev->device_name = mantis->device_name;
dev->input_phys = mantis->input_phys;
dev->input_id.bustype = BUS_PCI;
dev->input_id.vendor = mantis->vendor_id;
@@ -870,7 +870,7 @@ int saa7134_input_init1(struct saa7134_dev *dev)
if (raw_decode)
rc->driver_type = RC_DRIVER_IR_RAW;
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_PCI;
rc->input_id.version = 1;
@@ -188,14 +188,14 @@ int smi_ir_init(struct smi_dev *dev)
return -ENOMEM;
/* init input device */
- snprintf(ir->input_name, sizeof(ir->input_name), "IR (%s)",
+ snprintf(ir->device_name, sizeof(ir->device_name), "IR (%s)",
dev->info->name);
snprintf(ir->input_phys, sizeof(ir->input_phys), "pci-%s/ir0",
pci_name(dev->pci_dev));
rc_dev->driver_name = "SMI_PCIe";
rc_dev->input_phys = ir->input_phys;
- rc_dev->input_name = ir->input_name;
+ rc_dev->device_name = ir->device_name;
rc_dev->input_id.bustype = BUS_PCI;
rc_dev->input_id.version = 1;
rc_dev->input_id.vendor = dev->pci_dev->subsystem_vendor;
@@ -240,7 +240,7 @@ struct smi_rc {
struct smi_dev *dev;
struct rc_dev *rc_dev;
char input_phys[64];
- char input_name[64];
+ char device_name[64];
struct work_struct work;
u8 irData[256];
@@ -186,7 +186,7 @@ static int msp430_ir_init(struct budget_ci *budget_ci)
"pci-%s/ir0", pci_name(saa->pci));
dev->driver_name = MODULE_NAME;
- dev->input_name = budget_ci->ir.name;
+ dev->device_name = budget_ci->ir.name;
dev->input_phys = budget_ci->ir.phys;
dev->input_id.bustype = BUS_PCI;
dev->input_id.version = 1;
@@ -766,7 +766,7 @@ static void ati_remote_rc_init(struct ati_remote *ati_remote)
rdev->open = ati_remote_rc_open;
rdev->close = ati_remote_rc_close;
- rdev->input_name = ati_remote->rc_name;
+ rdev->device_name = ati_remote->rc_name;
rdev->input_phys = ati_remote->rc_phys;
usb_to_input_id(ati_remote->udev, &rdev->input_id);
@@ -1060,7 +1060,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
rdev->s_idle = ene_set_idle;
rdev->driver_name = ENE_DRIVER_NAME;
rdev->map_name = RC_MAP_RC6_MCE;
- rdev->input_name = "ENE eHome Infrared Remote Receiver";
+ rdev->device_name = "ENE eHome Infrared Remote Receiver";
if (dev->hw_learning_and_tx_capable) {
rdev->s_learning_mode = ene_set_learning_mode;
@@ -1070,7 +1070,7 @@ static int ene_probe(struct pnp_dev *pnp_dev, const struct pnp_device_id *id)
rdev->s_tx_carrier = ene_set_tx_carrier;
rdev->s_tx_duty_cycle = ene_set_tx_duty_cycle;
rdev->s_carrier_report = ene_set_carrier_report;
- rdev->input_name = "ENE eHome Infrared Remote Transceiver";
+ rdev->device_name = "ENE eHome Infrared Remote Transceiver";
}
dev->rdev = rdev;
@@ -532,7 +532,7 @@ static int fintek_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id
rdev->allowed_protocols = RC_BIT_ALL_IR_DECODER;
rdev->open = fintek_open;
rdev->close = fintek_close;
- rdev->input_name = FINTEK_DESCRIPTION;
+ rdev->device_name = FINTEK_DESCRIPTION;
rdev->input_phys = "fintek/cir0";
rdev->input_id.bustype = BUS_HOST;
rdev->input_id.vendor = VENDOR_ID_FINTEK;
@@ -150,7 +150,7 @@ static int gpio_ir_recv_probe(struct platform_device *pdev)
}
rcdev->priv = gpio_dev;
- rcdev->input_name = GPIO_IR_DEVICE_NAME;
+ rcdev->device_name = GPIO_IR_DEVICE_NAME;
rcdev->input_phys = GPIO_IR_DEVICE_NAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
rcdev->input_id.vendor = 0x0001;
@@ -194,7 +194,7 @@ static int igorplugusb_probe(struct usb_interface *intf,
if (!rc)
goto fail;
- rc->input_name = DRIVER_DESC;
+ rc->device_name = DRIVER_DESC;
rc->input_phys = ir->phys;
usb_to_input_id(udev, &rc->input_id);
rc->dev.parent = &intf->dev;
@@ -487,7 +487,7 @@ static int iguanair_probe(struct usb_interface *intf,
usb_make_path(ir->udev, ir->phys, sizeof(ir->phys));
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
usb_to_input_id(ir->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
@@ -1083,7 +1083,7 @@ int img_ir_probe_hw(struct img_ir_priv *priv)
rdev->priv = priv;
rdev->map_name = RC_MAP_EMPTY;
rdev->allowed_protocols = img_ir_allowed_protos(priv);
- rdev->input_name = "IMG Infrared Decoder";
+ rdev->device_name = "IMG Infrared Decoder";
rdev->s_filter = img_ir_set_normal_filter;
rdev->s_wakeup_filter = img_ir_set_wakeup_filter;
@@ -117,7 +117,7 @@ int img_ir_probe_raw(struct img_ir_priv *priv)
}
rdev->priv = priv;
rdev->map_name = RC_MAP_EMPTY;
- rdev->input_name = "IMG Infrared Decoder Raw";
+ rdev->device_name = "IMG Infrared Decoder Raw";
/* Register raw decoder */
error = rc_register_device(rdev);
@@ -2063,7 +2063,7 @@ static struct rc_dev *imon_init_rdev(struct imon_context *ictx)
sizeof(ictx->phys_rdev));
strlcat(ictx->phys_rdev, "/input0", sizeof(ictx->phys_rdev));
- rdev->input_name = ictx->name_rdev;
+ rdev->device_name = ictx->name_rdev;
rdev->input_phys = ictx->phys_rdev;
usb_to_input_id(ictx->usbdev_intf0, &rdev->input_id);
rdev->dev.parent = ictx->dev;
@@ -249,7 +249,7 @@ static int hix5hd2_ir_probe(struct platform_device *pdev)
rdev->driver_name = IR_HIX5HD2_NAME;
map_name = of_get_property(node, "linux,rc-map-name", NULL);
rdev->map_name = map_name ?: RC_MAP_EMPTY;
- rdev->input_name = IR_HIX5HD2_NAME;
+ rdev->device_name = IR_HIX5HD2_NAME;
rdev->input_phys = IR_HIX5HD2_NAME "/input0";
rdev->input_id.bustype = BUS_HOST;
rdev->input_id.vendor = 0x0001;
@@ -155,6 +155,7 @@ static int ir_spi_probe(struct spi_device *spi)
idata->rc->tx_ir = ir_spi_tx;
idata->rc->s_tx_carrier = ir_spi_set_tx_carrier;
idata->rc->s_tx_duty_cycle = ir_spi_set_duty_cycle;
+ idata->rc->device_name = "IR SPI";
idata->rc->driver_name = IR_SPI_DRIVER_NAME;
idata->rc->priv = idata;
idata->spi = spi;
@@ -1576,7 +1576,7 @@ static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id
rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle;
}
- rdev->input_name = dev_desc->model;
+ rdev->device_name = dev_desc->model;
rdev->input_id.bustype = BUS_HOST;
rdev->input_id.vendor = PCI_VENDOR_ID_ITE;
rdev->input_id.product = 0;
@@ -1264,7 +1264,7 @@ static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir)
usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys));
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
usb_to_input_id(ir->usbdev, &rc->input_id);
rc->dev.parent = dev;
@@ -138,7 +138,7 @@ static int meson_ir_probe(struct platform_device *pdev)
}
ir->rc->priv = ir;
- ir->rc->input_name = DRIVER_NAME;
+ ir->rc->device_name = DRIVER_NAME;
ir->rc->input_phys = DRIVER_NAME "/input0";
ir->rc->input_id.bustype = BUS_HOST;
map_name = of_get_property(node, "linux,rc-map-name", NULL);
@@ -228,7 +228,7 @@ static int mtk_ir_probe(struct platform_device *pdev)
}
ir->rc->priv = ir;
- ir->rc->input_name = MTK_IR_DEV;
+ ir->rc->device_name = MTK_IR_DEV;
ir->rc->input_phys = MTK_IR_DEV "/input0";
ir->rc->input_id.bustype = BUS_HOST;
ir->rc->input_id.vendor = 0x0001;
@@ -1134,7 +1134,7 @@ static int nvt_probe(struct pnp_dev *pdev, const struct pnp_device_id *dev_id)
rdev->tx_ir = nvt_tx_ir;
rdev->s_tx_carrier = nvt_set_tx_carrier;
rdev->s_wakeup_filter = nvt_ir_raw_set_wakeup_filter;
- rdev->input_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
+ rdev->device_name = "Nuvoton w836x7hg Infrared Remote Transceiver";
rdev->input_phys = "nuvoton/cir0";
rdev->input_id.bustype = BUS_HOST;
rdev->input_id.vendor = PCI_VENDOR_ID_WINBOND2;
@@ -219,7 +219,7 @@ static int __init loop_init(void)
return -ENOMEM;
}
- rc->input_name = "rc-core loopback device";
+ rc->device_name = "rc-core loopback device";
rc->input_phys = "rc-core/virtual";
rc->input_id.bustype = BUS_VIRTUAL;
rc->input_id.version = 1;
@@ -530,7 +530,7 @@ u32 rc_g_keycode_from_table(struct rc_dev *dev, u32 scancode)
if (keycode != KEY_RESERVED)
IR_dprintk(1, "%s: scancode 0x%04x keycode 0x%02x\n",
- dev->input_name, scancode, keycode);
+ dev->device_name, scancode, keycode);
return keycode;
}
@@ -663,7 +663,7 @@ static void ir_do_keydown(struct rc_dev *dev, enum rc_type protocol,
dev->last_keycode = keycode;
IR_dprintk(1, "%s: key down event, key 0x%04x, protocol 0x%04x, scancode 0x%08x\n",
- dev->input_name, keycode, protocol, scancode);
+ dev->device_name, keycode, protocol, scancode);
input_report_key(dev->input_dev, keycode, 1);
led_trigger_event(led_feedback, LED_FULL);
@@ -1663,7 +1663,7 @@ static int rc_prepare_rx_device(struct rc_dev *dev)
dev->input_dev->dev.parent = &dev->dev;
memcpy(&dev->input_dev->id, &dev->input_id, sizeof(dev->input_id));
dev->input_dev->phys = dev->input_phys;
- dev->input_dev->name = dev->input_name;
+ dev->input_dev->name = dev->device_name;
return 0;
@@ -1759,7 +1759,7 @@ int rc_register_device(struct rc_dev *dev)
path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL);
dev_info(&dev->dev, "%s as %s\n",
- dev->input_name ?: "Unspecified device", path ?: "N/A");
+ dev->device_name ?: "Unspecified device", path ?: "N/A");
kfree(path);
if (dev->driver_type != RC_DRIVER_IR_RAW_TX) {
@@ -951,7 +951,7 @@ static struct rc_dev *redrat3_init_rc_dev(struct redrat3_dev *rr3)
usb_make_path(rr3->udev, rr3->phys, sizeof(rr3->phys));
- rc->input_name = rr3->name;
+ rc->device_name = rr3->name;
rc->input_phys = rr3->phys;
usb_to_input_id(rr3->udev, &rc->input_id);
rc->dev.parent = dev;
@@ -513,19 +513,19 @@ static int serial_ir_probe(struct platform_device *dev)
switch (type) {
case IR_HOMEBREW:
- rcdev->input_name = "Serial IR type home-brew";
+ rcdev->device_name = "Serial IR type home-brew";
break;
case IR_IRDEO:
- rcdev->input_name = "Serial IR type IRdeo";
+ rcdev->device_name = "Serial IR type IRdeo";
break;
case IR_IRDEO_REMOTE:
- rcdev->input_name = "Serial IR type IRdeo remote";
+ rcdev->device_name = "Serial IR type IRdeo remote";
break;
case IR_ANIMAX:
- rcdev->input_name = "Serial IR type AnimaX";
+ rcdev->device_name = "Serial IR type AnimaX";
break;
case IR_IGOR:
- rcdev->input_name = "Serial IR type IgorPlug";
+ rcdev->device_name = "Serial IR type IgorPlug";
break;
}
@@ -308,7 +308,7 @@ static int sir_ir_probe(struct platform_device *dev)
if (!rcdev)
return -ENOMEM;
- rcdev->input_name = "SIR IrDA port";
+ rcdev->device_name = "SIR IrDA port";
rcdev->input_phys = KBUILD_MODNAME "/input0";
rcdev->input_id.bustype = BUS_HOST;
rcdev->input_id.vendor = 0x0001;
@@ -299,7 +299,7 @@ static int st_rc_probe(struct platform_device *pdev)
rdev->close = st_rc_close;
rdev->driver_name = IR_ST_NAME;
rdev->map_name = RC_MAP_EMPTY;
- rdev->input_name = "ST Remote Control Receiver";
+ rdev->device_name = "ST Remote Control Receiver";
ret = rc_register_device(rdev);
if (ret < 0)
@@ -299,7 +299,7 @@ static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
strlcat(sz->phys, "/input0", sizeof(sz->phys));
- rdev->input_name = sz->name;
+ rdev->device_name = sz->name;
rdev->input_phys = sz->phys;
usb_to_input_id(sz->usbdev, &rdev->input_id);
rdev->dev.parent = dev;
@@ -215,7 +215,7 @@ static int sunxi_ir_probe(struct platform_device *pdev)
}
ir->rc->priv = ir;
- ir->rc->input_name = SUNXI_IR_DEV;
+ ir->rc->device_name = SUNXI_IR_DEV;
ir->rc->input_phys = "sunxi-ir/input0";
ir->rc->input_id.bustype = BUS_HOST;
ir->rc->input_id.vendor = 0x0001;
@@ -309,7 +309,7 @@ static int ttusbir_probe(struct usb_interface *intf,
usb_make_path(tt->udev, tt->phys, sizeof(tt->phys));
- rc->input_name = DRIVER_DESC;
+ rc->device_name = DRIVER_DESC;
rc->input_phys = tt->phys;
usb_to_input_id(tt->udev, &rc->input_id);
rc->dev.parent = &intf->dev;
@@ -1068,7 +1068,7 @@ wbcir_probe(struct pnp_dev *device, const struct pnp_device_id *dev_id)
}
data->dev->driver_name = DRVNAME;
- data->dev->input_name = WBCIR_NAME;
+ data->dev->device_name = WBCIR_NAME;
data->dev->input_phys = "wbcir/cir0";
data->dev->input_id.bustype = BUS_HOST;
data->dev->input_id.vendor = PCI_VENDOR_ID_WINBOND;
@@ -335,7 +335,7 @@ int au0828_rc_register(struct au0828_dev *dev)
usb_make_path(dev->usbdev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_USB;
rc->input_id.version = 1;
@@ -154,13 +154,12 @@ static int dvb_usbv2_remote_init(struct dvb_usb_device *d)
}
dev->dev.parent = &d->udev->dev;
- dev->input_name = d->name;
+ dev->device_name = d->name;
usb_make_path(d->udev, d->rc_phys, sizeof(d->rc_phys));
strlcat(d->rc_phys, "/ir0", sizeof(d->rc_phys));
dev->input_phys = d->rc_phys;
usb_to_input_id(d->udev, &dev->input_id);
- /* TODO: likely RC-core should took const char * */
- dev->driver_name = (char *) d->props->driver_name;
+ dev->driver_name = d->props->driver_name;
dev->map_name = d->rc.map_name;
dev->allowed_protocols = d->rc.allowed_protos;
dev->change_protocol = d->rc.change_protocol;
@@ -279,7 +279,7 @@ static int rc_core_dvb_usb_remote_init(struct dvb_usb_device *d)
dev->change_protocol = d->props.rc.core.change_protocol;
dev->allowed_protocols = d->props.rc.core.allowed_protos;
usb_to_input_id(d->udev, &dev->input_id);
- dev->input_name = "IR-receiver inside an USB DVB receiver";
+ dev->device_name = "IR-receiver inside an USB DVB receiver";
dev->input_phys = d->rc_phys;
dev->dev.parent = &d->udev->dev;
dev->priv = d;
@@ -807,7 +807,7 @@ static int em28xx_ir_init(struct em28xx *dev)
usb_make_path(udev, ir->phys, sizeof(ir->phys));
strlcat(ir->phys, "/input0", sizeof(ir->phys));
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_USB;
rc->input_id.version = 1;
@@ -458,7 +458,7 @@ int tm6000_ir_init(struct tm6000_core *dev)
rc_type = RC_BIT_UNKNOWN;
tm6000_ir_change_protocol(rc, &rc_type);
- rc->input_name = ir->name;
+ rc->device_name = ir->name;
rc->input_phys = ir->phys;
rc->input_id.bustype = BUS_USB;
rc->input_id.version = 1;
@@ -184,7 +184,7 @@ struct cec_adapter {
u16 phys_addrs[15];
u32 sequence;
- char input_name[32];
+ char device_name[32];
char input_phys[32];
char input_drv[32];
};
@@ -72,7 +72,7 @@ enum rc_filter_type {
* @dev: driver model's view of this device
* @managed_alloc: devm_rc_allocate_device was used to create rc_dev
* @sysfs_groups: sysfs attribute groups
- * @input_name: name of the input child device
+ * @device_name: name of the rc child device
* @input_phys: physical path to the input child device
* @input_id: id of the input child device (struct input_id)
* @driver_name: name of the hardware driver which registered this device
@@ -138,10 +138,10 @@ struct rc_dev {
struct device dev;
bool managed_alloc;
const struct attribute_group *sysfs_groups[5];
- const char *input_name;
+ const char *device_name;
const char *input_phys;
struct input_id input_id;
- char *driver_name;
+ const char *driver_name;
const char *map_name;
struct rc_map rc_map;
struct mutex lock;
When an ir-spi is registered, you get this message. rc rc0: Unspecified device as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 "Unspecified device" refers to input_name, which makes no sense for IR TX only devices. So, rename to device_name. Also make driver_name const char* so that no casts are needed anywhere. Now ir-spi reports: rc rc0: IR SPI as /devices/platform/soc/3f215080.spi/spi_master/spi32766/spi32766.128/rc/rc0 Signed-off-by: Sean Young <sean@mess.org> --- drivers/hid/hid-picolcd_cir.c | 2 +- drivers/media/cec/cec-core.c | 4 ++-- drivers/media/common/siano/smsir.c | 4 ++-- drivers/media/i2c/ir-kbd-i2c.c | 2 +- drivers/media/pci/bt8xx/bttv-input.c | 2 +- drivers/media/pci/cx23885/cx23885-input.c | 2 +- drivers/media/pci/cx88/cx88-input.c | 2 +- drivers/media/pci/dm1105/dm1105.c | 2 +- drivers/media/pci/mantis/mantis_common.h | 2 +- drivers/media/pci/mantis/mantis_input.c | 4 ++-- drivers/media/pci/saa7134/saa7134-input.c | 2 +- drivers/media/pci/smipcie/smipcie-ir.c | 4 ++-- drivers/media/pci/smipcie/smipcie.h | 2 +- drivers/media/pci/ttpci/budget-ci.c | 2 +- drivers/media/rc/ati_remote.c | 2 +- drivers/media/rc/ene_ir.c | 4 ++-- drivers/media/rc/fintek-cir.c | 2 +- drivers/media/rc/gpio-ir-recv.c | 2 +- drivers/media/rc/igorplugusb.c | 2 +- drivers/media/rc/iguanair.c | 2 +- drivers/media/rc/img-ir/img-ir-hw.c | 2 +- drivers/media/rc/img-ir/img-ir-raw.c | 2 +- drivers/media/rc/imon.c | 2 +- drivers/media/rc/ir-hix5hd2.c | 2 +- drivers/media/rc/ir-spi.c | 1 + drivers/media/rc/ite-cir.c | 2 +- drivers/media/rc/mceusb.c | 2 +- drivers/media/rc/meson-ir.c | 2 +- drivers/media/rc/mtk-cir.c | 2 +- drivers/media/rc/nuvoton-cir.c | 2 +- drivers/media/rc/rc-loopback.c | 2 +- drivers/media/rc/rc-main.c | 8 ++++---- drivers/media/rc/redrat3.c | 2 +- drivers/media/rc/serial_ir.c | 10 +++++----- drivers/media/rc/sir_ir.c | 2 +- drivers/media/rc/st_rc.c | 2 +- drivers/media/rc/streamzap.c | 2 +- drivers/media/rc/sunxi-cir.c | 2 +- drivers/media/rc/ttusbir.c | 2 +- drivers/media/rc/winbond-cir.c | 2 +- drivers/media/usb/au0828/au0828-input.c | 2 +- drivers/media/usb/dvb-usb-v2/dvb_usb_core.c | 5 ++--- drivers/media/usb/dvb-usb/dvb-usb-remote.c | 2 +- drivers/media/usb/em28xx/em28xx-input.c | 2 +- drivers/media/usb/tm6000/tm6000-input.c | 2 +- include/media/cec.h | 2 +- include/media/rc-core.h | 6 +++--- 47 files changed, 62 insertions(+), 62 deletions(-)