| Message ID | b150930211d305da848eed1346e2258340cfbc8b.1488373517.git-series.kieran.bingham+renesas@ideasonboard.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Kieran, Thank you for the patch. On Wednesday 01 Mar 2017 13:12:55 Kieran Bingham wrote: > To be able to perform page flips in DRM without flicker we need to be > able to notify the rcar-du module when the VSP has completed its > processing. > > To synchronise the page flip events for userspace, we move the required > event through the VSP to track the data flow. When the frame is > completed, the event can be returned back to the originator through the > registered callback. > > We must not have bidirectional dependencies on the two components to > maintain support for loadable modules, thus we extend the API to allow > a callback to be registered within the VSP DRM interface. > > Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> > --- > drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 2 +- > drivers/media/platform/vsp1/vsp1_drm.c | 42 +++++++++++++++++++++++++-- > drivers/media/platform/vsp1/vsp1_drm.h | 12 ++++++++- > include/media/vsp1.h | 6 +++- > 4 files changed, 58 insertions(+), 4 deletions(-) > > diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b5bfbe50bd87..71e70e1e0881 > 100644 > --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c > @@ -81,7 +81,7 @@ void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) > > void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc) > { > - vsp1_du_atomic_flush(crtc->vsp->vsp); > + vsp1_du_atomic_flush(crtc->vsp->vsp, NULL); > } > > /* Keep the two tables in sync. */ > diff --git a/drivers/media/platform/vsp1/vsp1_drm.c > b/drivers/media/platform/vsp1/vsp1_drm.c index 8e2aa3f8e52f..743cbce48d0c > 100644 > --- a/drivers/media/platform/vsp1/vsp1_drm.c > +++ b/drivers/media/platform/vsp1/vsp1_drm.c > @@ -52,6 +52,40 @@ int vsp1_du_init(struct device *dev) > EXPORT_SYMBOL_GPL(vsp1_du_init); > > /** > + * vsp1_du_register_callback - Register VSP completion notifier callback > + * > + * Allow the DRM framework to register a callback with us to notify the end > of + * processing each frame. This allows synchronisation for page > flipping. + * > + * @dev: the VSP device > + * @callback: the callback function to notify the DU module > + * @private: private structure data to pass with the callback > + * > + */ > +void vsp1_du_register_callback(struct device *dev, > + void (*callback)(void *, void *), > + void *private) > +{ > + struct vsp1_device *vsp1 = dev_get_drvdata(dev); > + > + vsp1->drm->du_complete = callback; > + vsp1->drm->du_private = private; > +} > +EXPORT_SYMBOL_GPL(vsp1_du_register_callback); As they're not supposed to change at runtime while the display is running, how about passing the callback and private data pointer to the vsp1_du_setup_lif() function ? Feel free to create a structure for all the parameters passed to the function if you think we'll have too much (which would, as a side effect, made updates to the API easier in the future as changes to the two subsystems will be easier to decouple). > +static void vsp1_du_pipeline_frame_end(struct vsp1_pipeline *pipe) > +{ > + struct vsp1_drm *drm = to_vsp1_drm(pipe); > + > + if (drm->du_complete && drm->active_data) > + drm->du_complete(drm->du_private, drm->active_data); > + > + /* The pending frame is now active */ > + drm->active_data = drm->pending_data; > + drm->pending_data = NULL; > +} I would move this function to the "Interrupt Handling" section. > +/** > * vsp1_du_setup_lif - Setup the output part of the VSP pipeline > * @dev: the VSP device > * @width: output frame width in pixels > @@ -99,7 +133,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int > width, } > > pipe->num_inputs = 0; > - > + pipe->frame_end = NULL; You can drop this if ... > + vsp1->drm->du_complete = NULL; > vsp1_dlm_reset(pipe->output->dlm); > vsp1_device_put(vsp1); > > @@ -196,6 +231,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int > width, if (ret < 0) > return ret; > > + pipe->frame_end = vsp1_du_pipeline_frame_end; > + ... you move this to vsp1_drm_init(). > ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity, > &pipe->pipe); > if (ret < 0) { > @@ -420,7 +457,7 @@ static unsigned int rpf_zpos(struct vsp1_device *vsp1, > struct vsp1_rwpf *rpf) * vsp1_du_atomic_flush - Commit an atomic update > * @dev: the VSP device > */ > -void vsp1_du_atomic_flush(struct device *dev) > +void vsp1_du_atomic_flush(struct device *dev, void *data) > { > struct vsp1_device *vsp1 = dev_get_drvdata(dev); > struct vsp1_pipeline *pipe = &vsp1->drm->pipe; > @@ -504,6 +541,7 @@ void vsp1_du_atomic_flush(struct device *dev) > > vsp1_dl_list_commit(pipe->dl); > pipe->dl = NULL; > + vsp1->drm->pending_data = data; > > /* Start or stop the pipeline if needed. */ > if (!vsp1->drm->num_inputs && pipe->num_inputs) { > diff --git a/drivers/media/platform/vsp1/vsp1_drm.h > b/drivers/media/platform/vsp1/vsp1_drm.h index 9e28ab9254ba..fde19e5948a0 > 100644 > --- a/drivers/media/platform/vsp1/vsp1_drm.h > +++ b/drivers/media/platform/vsp1/vsp1_drm.h > @@ -33,8 +33,20 @@ struct vsp1_drm { > struct v4l2_rect compose; > unsigned int zpos; > } inputs[VSP1_MAX_RPF]; > + > + /* Frame syncronisation */ > + void (*du_complete)(void *, void *); > + void *du_private; > + void *pending_data; > + void *active_data; > }; > > +static inline struct vsp1_drm * > +to_vsp1_drm(struct vsp1_pipeline *pipe) No need for a line split. > +{ > + return container_of(pipe, struct vsp1_drm, pipe); > +} > + > int vsp1_drm_init(struct vsp1_device *vsp1); > void vsp1_drm_cleanup(struct vsp1_device *vsp1); > int vsp1_drm_create_links(struct vsp1_device *vsp1); > diff --git a/include/media/vsp1.h b/include/media/vsp1.h > index 458b400373d4..f82fbab01f21 100644 > --- a/include/media/vsp1.h > +++ b/include/media/vsp1.h > @@ -20,6 +20,10 @@ struct device; > > int vsp1_du_init(struct device *dev); > > +void vsp1_du_register_callback(struct device *dev, > + void (*callback)(void *, void *), > + void *private); > + > int vsp1_du_setup_lif(struct device *dev, unsigned int width, > unsigned int height); > > @@ -36,6 +40,6 @@ struct vsp1_du_atomic_config { > void vsp1_du_atomic_begin(struct device *dev); > int vsp1_du_atomic_update(struct device *dev, unsigned int rpf, > const struct vsp1_du_atomic_config *cfg); > -void vsp1_du_atomic_flush(struct device *dev); > +void vsp1_du_atomic_flush(struct device *dev, void *data); > > #endif /* __MEDIA_VSP1_H__ */
Hi Laurent, On 03/03/17 02:11, Laurent Pinchart wrote: > Hi Kieran, > > Thank you for the patch. > > On Wednesday 01 Mar 2017 13:12:55 Kieran Bingham wrote: >> To be able to perform page flips in DRM without flicker we need to be >> able to notify the rcar-du module when the VSP has completed its >> processing. >> >> To synchronise the page flip events for userspace, we move the required >> event through the VSP to track the data flow. When the frame is >> completed, the event can be returned back to the originator through the >> registered callback. >> >> We must not have bidirectional dependencies on the two components to >> maintain support for loadable modules, thus we extend the API to allow >> a callback to be registered within the VSP DRM interface. >> >> Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> >> --- >> drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 2 +- >> drivers/media/platform/vsp1/vsp1_drm.c | 42 +++++++++++++++++++++++++-- >> drivers/media/platform/vsp1/vsp1_drm.h | 12 ++++++++- >> include/media/vsp1.h | 6 +++- >> 4 files changed, 58 insertions(+), 4 deletions(-) >> >> diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b5bfbe50bd87..71e70e1e0881 >> 100644 >> --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c >> @@ -81,7 +81,7 @@ void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) >> >> void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc) >> { >> - vsp1_du_atomic_flush(crtc->vsp->vsp); >> + vsp1_du_atomic_flush(crtc->vsp->vsp, NULL); >> } >> >> /* Keep the two tables in sync. */ >> diff --git a/drivers/media/platform/vsp1/vsp1_drm.c >> b/drivers/media/platform/vsp1/vsp1_drm.c index 8e2aa3f8e52f..743cbce48d0c >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_drm.c >> +++ b/drivers/media/platform/vsp1/vsp1_drm.c >> @@ -52,6 +52,40 @@ int vsp1_du_init(struct device *dev) >> EXPORT_SYMBOL_GPL(vsp1_du_init); >> >> /** >> + * vsp1_du_register_callback - Register VSP completion notifier callback >> + * >> + * Allow the DRM framework to register a callback with us to notify the end >> of + * processing each frame. This allows synchronisation for page >> flipping. + * >> + * @dev: the VSP device >> + * @callback: the callback function to notify the DU module >> + * @private: private structure data to pass with the callback >> + * >> + */ >> +void vsp1_du_register_callback(struct device *dev, >> + void (*callback)(void *, void *), >> + void *private) >> +{ >> + struct vsp1_device *vsp1 = dev_get_drvdata(dev); >> + >> + vsp1->drm->du_complete = callback; >> + vsp1->drm->du_private = private; >> +} >> +EXPORT_SYMBOL_GPL(vsp1_du_register_callback); > > As they're not supposed to change at runtime while the display is running, how > about passing the callback and private data pointer to the vsp1_du_setup_lif() > function ? Feel free to create a structure for all the parameters passed to > the function if you think we'll have too much (which would, as a side effect, > made updates to the API easier in the future as changes to the two subsystems > will be easier to decouple). Sure, that's fine. I think a config structure makes sense here. >> +static void vsp1_du_pipeline_frame_end(struct vsp1_pipeline *pipe) >> +{ >> + struct vsp1_drm *drm = to_vsp1_drm(pipe); >> + >> + if (drm->du_complete && drm->active_data) >> + drm->du_complete(drm->du_private, drm->active_data); >> + >> + /* The pending frame is now active */ >> + drm->active_data = drm->pending_data; >> + drm->pending_data = NULL; >> +} > > I would move this function to the "Interrupt Handling" section. Ack. >> +/** >> * vsp1_du_setup_lif - Setup the output part of the VSP pipeline >> * @dev: the VSP device >> * @width: output frame width in pixels >> @@ -99,7 +133,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int >> width, } >> >> pipe->num_inputs = 0; >> - >> + pipe->frame_end = NULL; > > You can drop this if ... > >> + vsp1->drm->du_complete = NULL; >> vsp1_dlm_reset(pipe->output->dlm); >> vsp1_device_put(vsp1); >> >> @@ -196,6 +231,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int >> width, if (ret < 0) >> return ret; >> >> + pipe->frame_end = vsp1_du_pipeline_frame_end; >> + > > ... you move this to vsp1_drm_init(). Done. > >> ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity, >> &pipe->pipe); >> if (ret < 0) { >> @@ -420,7 +457,7 @@ static unsigned int rpf_zpos(struct vsp1_device *vsp1, >> struct vsp1_rwpf *rpf) * vsp1_du_atomic_flush - Commit an atomic update >> * @dev: the VSP device >> */ >> -void vsp1_du_atomic_flush(struct device *dev) >> +void vsp1_du_atomic_flush(struct device *dev, void *data) >> { >> struct vsp1_device *vsp1 = dev_get_drvdata(dev); >> struct vsp1_pipeline *pipe = &vsp1->drm->pipe; >> @@ -504,6 +541,7 @@ void vsp1_du_atomic_flush(struct device *dev) >> >> vsp1_dl_list_commit(pipe->dl); >> pipe->dl = NULL; >> + vsp1->drm->pending_data = data; >> >> /* Start or stop the pipeline if needed. */ >> if (!vsp1->drm->num_inputs && pipe->num_inputs) { >> diff --git a/drivers/media/platform/vsp1/vsp1_drm.h >> b/drivers/media/platform/vsp1/vsp1_drm.h index 9e28ab9254ba..fde19e5948a0 >> 100644 >> --- a/drivers/media/platform/vsp1/vsp1_drm.h >> +++ b/drivers/media/platform/vsp1/vsp1_drm.h >> @@ -33,8 +33,20 @@ struct vsp1_drm { >> struct v4l2_rect compose; >> unsigned int zpos; >> } inputs[VSP1_MAX_RPF]; >> + >> + /* Frame syncronisation */ >> + void (*du_complete)(void *, void *); >> + void *du_private; >> + void *pending_data; >> + void *active_data; >> }; >> >> +static inline struct vsp1_drm * >> +to_vsp1_drm(struct vsp1_pipeline *pipe) > > No need for a line split. Fixed. >> +{ >> + return container_of(pipe, struct vsp1_drm, pipe); >> +} >> + >> int vsp1_drm_init(struct vsp1_device *vsp1); >> void vsp1_drm_cleanup(struct vsp1_device *vsp1); >> int vsp1_drm_create_links(struct vsp1_device *vsp1); >> diff --git a/include/media/vsp1.h b/include/media/vsp1.h >> index 458b400373d4..f82fbab01f21 100644 >> --- a/include/media/vsp1.h >> +++ b/include/media/vsp1.h >> @@ -20,6 +20,10 @@ struct device; >> >> int vsp1_du_init(struct device *dev); >> >> +void vsp1_du_register_callback(struct device *dev, >> + void (*callback)(void *, void *), >> + void *private); >> + >> int vsp1_du_setup_lif(struct device *dev, unsigned int width, >> unsigned int height); >> >> @@ -36,6 +40,6 @@ struct vsp1_du_atomic_config { >> void vsp1_du_atomic_begin(struct device *dev); >> int vsp1_du_atomic_update(struct device *dev, unsigned int rpf, >> const struct vsp1_du_atomic_config *cfg); >> -void vsp1_du_atomic_flush(struct device *dev); >> +void vsp1_du_atomic_flush(struct device *dev, void *data); >> >> #endif /* __MEDIA_VSP1_H__ */ >
diff --git a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c index b5bfbe50bd87..71e70e1e0881 100644 --- a/drivers/gpu/drm/rcar-du/rcar_du_vsp.c +++ b/drivers/gpu/drm/rcar-du/rcar_du_vsp.c @@ -81,7 +81,7 @@ void rcar_du_vsp_atomic_begin(struct rcar_du_crtc *crtc) void rcar_du_vsp_atomic_flush(struct rcar_du_crtc *crtc) { - vsp1_du_atomic_flush(crtc->vsp->vsp); + vsp1_du_atomic_flush(crtc->vsp->vsp, NULL); } /* Keep the two tables in sync. */ diff --git a/drivers/media/platform/vsp1/vsp1_drm.c b/drivers/media/platform/vsp1/vsp1_drm.c index 8e2aa3f8e52f..743cbce48d0c 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.c +++ b/drivers/media/platform/vsp1/vsp1_drm.c @@ -52,6 +52,40 @@ int vsp1_du_init(struct device *dev) EXPORT_SYMBOL_GPL(vsp1_du_init); /** + * vsp1_du_register_callback - Register VSP completion notifier callback + * + * Allow the DRM framework to register a callback with us to notify the end of + * processing each frame. This allows synchronisation for page flipping. + * + * @dev: the VSP device + * @callback: the callback function to notify the DU module + * @private: private structure data to pass with the callback + * + */ +void vsp1_du_register_callback(struct device *dev, + void (*callback)(void *, void *), + void *private) +{ + struct vsp1_device *vsp1 = dev_get_drvdata(dev); + + vsp1->drm->du_complete = callback; + vsp1->drm->du_private = private; +} +EXPORT_SYMBOL_GPL(vsp1_du_register_callback); + +static void vsp1_du_pipeline_frame_end(struct vsp1_pipeline *pipe) +{ + struct vsp1_drm *drm = to_vsp1_drm(pipe); + + if (drm->du_complete && drm->active_data) + drm->du_complete(drm->du_private, drm->active_data); + + /* The pending frame is now active */ + drm->active_data = drm->pending_data; + drm->pending_data = NULL; +} + +/** * vsp1_du_setup_lif - Setup the output part of the VSP pipeline * @dev: the VSP device * @width: output frame width in pixels @@ -99,7 +133,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, } pipe->num_inputs = 0; - + pipe->frame_end = NULL; + vsp1->drm->du_complete = NULL; vsp1_dlm_reset(pipe->output->dlm); vsp1_device_put(vsp1); @@ -196,6 +231,8 @@ int vsp1_du_setup_lif(struct device *dev, unsigned int width, if (ret < 0) return ret; + pipe->frame_end = vsp1_du_pipeline_frame_end; + ret = media_entity_pipeline_start(&pipe->output->entity.subdev.entity, &pipe->pipe); if (ret < 0) { @@ -420,7 +457,7 @@ static unsigned int rpf_zpos(struct vsp1_device *vsp1, struct vsp1_rwpf *rpf) * vsp1_du_atomic_flush - Commit an atomic update * @dev: the VSP device */ -void vsp1_du_atomic_flush(struct device *dev) +void vsp1_du_atomic_flush(struct device *dev, void *data) { struct vsp1_device *vsp1 = dev_get_drvdata(dev); struct vsp1_pipeline *pipe = &vsp1->drm->pipe; @@ -504,6 +541,7 @@ void vsp1_du_atomic_flush(struct device *dev) vsp1_dl_list_commit(pipe->dl); pipe->dl = NULL; + vsp1->drm->pending_data = data; /* Start or stop the pipeline if needed. */ if (!vsp1->drm->num_inputs && pipe->num_inputs) { diff --git a/drivers/media/platform/vsp1/vsp1_drm.h b/drivers/media/platform/vsp1/vsp1_drm.h index 9e28ab9254ba..fde19e5948a0 100644 --- a/drivers/media/platform/vsp1/vsp1_drm.h +++ b/drivers/media/platform/vsp1/vsp1_drm.h @@ -33,8 +33,20 @@ struct vsp1_drm { struct v4l2_rect compose; unsigned int zpos; } inputs[VSP1_MAX_RPF]; + + /* Frame syncronisation */ + void (*du_complete)(void *, void *); + void *du_private; + void *pending_data; + void *active_data; }; +static inline struct vsp1_drm * +to_vsp1_drm(struct vsp1_pipeline *pipe) +{ + return container_of(pipe, struct vsp1_drm, pipe); +} + int vsp1_drm_init(struct vsp1_device *vsp1); void vsp1_drm_cleanup(struct vsp1_device *vsp1); int vsp1_drm_create_links(struct vsp1_device *vsp1); diff --git a/include/media/vsp1.h b/include/media/vsp1.h index 458b400373d4..f82fbab01f21 100644 --- a/include/media/vsp1.h +++ b/include/media/vsp1.h @@ -20,6 +20,10 @@ struct device; int vsp1_du_init(struct device *dev); +void vsp1_du_register_callback(struct device *dev, + void (*callback)(void *, void *), + void *private); + int vsp1_du_setup_lif(struct device *dev, unsigned int width, unsigned int height); @@ -36,6 +40,6 @@ struct vsp1_du_atomic_config { void vsp1_du_atomic_begin(struct device *dev); int vsp1_du_atomic_update(struct device *dev, unsigned int rpf, const struct vsp1_du_atomic_config *cfg); -void vsp1_du_atomic_flush(struct device *dev); +void vsp1_du_atomic_flush(struct device *dev, void *data); #endif /* __MEDIA_VSP1_H__ */
To be able to perform page flips in DRM without flicker we need to be able to notify the rcar-du module when the VSP has completed its processing. To synchronise the page flip events for userspace, we move the required event through the VSP to track the data flow. When the frame is completed, the event can be returned back to the originator through the registered callback. We must not have bidirectional dependencies on the two components to maintain support for loadable modules, thus we extend the API to allow a callback to be registered within the VSP DRM interface. Signed-off-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> --- drivers/gpu/drm/rcar-du/rcar_du_vsp.c | 2 +- drivers/media/platform/vsp1/vsp1_drm.c | 42 +++++++++++++++++++++++++-- drivers/media/platform/vsp1/vsp1_drm.h | 12 ++++++++- include/media/vsp1.h | 6 +++- 4 files changed, 58 insertions(+), 4 deletions(-)