@@ -56,7 +56,7 @@ MODULE_PARM_DESC(debug, "activates debug info");
#define dprintk(fmt, arg...) do { \
if (debug) \
printk(KERN_INFO "em28xx-audio %s: " fmt, \
- __func__, ##arg); \
+ __func__, ##arg); \
} while (0)
static int index[SNDRV_CARDS] = SNDRV_DEFAULT_IDX;
@@ -232,7 +232,6 @@ static struct snd_pcm_hardware snd_em28xx_hw_capture = {
.channels_max = 2,
.buffer_bytes_max = 62720 * 8, /* just about the value in usbaudio.c */
-
/*
* The period is 12.288 bytes. Allow a 10% of variation along its
* value, in order to avoid overruns/underruns due to some clock
@@ -361,7 +360,7 @@ static int snd_em28xx_hw_capture_params(struct snd_pcm_substream *substream,
dprintk("Setting capture parameters\n");
ret = snd_pcm_alloc_vmalloc_buffer(substream,
- params_buffer_bytes(hw_params));
+ params_buffer_bytes(hw_params));
if (ret < 0)
return ret;
#if 0
@@ -478,7 +477,7 @@ static struct page *snd_pcm_get_vmalloc_page(struct snd_pcm_substream *subs,
* AC97 volume control support
*/
static int em28xx_vol_info(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_info *info)
+ struct snd_ctl_elem_info *info)
{
struct em28xx *dev = snd_kcontrol_chip(kcontrol);
@@ -494,7 +493,7 @@ static int em28xx_vol_info(struct snd_kcontrol *kcontrol,
}
static int em28xx_vol_put(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
+ struct snd_ctl_elem_value *value)
{
struct em28xx *dev = snd_kcontrol_chip(kcontrol);
struct snd_pcm_substream *substream = dev->adev.capture_pcm_substream;
@@ -534,7 +533,7 @@ err:
}
static int em28xx_vol_get(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *value)
+ struct snd_ctl_elem_value *value)
{
struct em28xx *dev = snd_kcontrol_chip(kcontrol);
struct snd_pcm_substream *substream = dev->adev.capture_pcm_substream;
@@ -655,7 +654,7 @@ static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
struct snd_kcontrol *kctl;
struct snd_kcontrol_new tmp;
- memset (&tmp, 0, sizeof(tmp));
+ memset(&tmp, 0, sizeof(tmp));
tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
tmp.private_value = id,
tmp.name = ctl_name,
@@ -672,7 +671,7 @@ static int em28xx_cvol_new(struct snd_card *card, struct em28xx *dev,
dprintk("Added control %s for ac97 volume control 0x%04x\n",
ctl_name, id);
- memset (&tmp, 0, sizeof(tmp));
+ memset(&tmp, 0, sizeof(tmp));
tmp.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
tmp.private_value = id,
tmp.name = ctl_name,
@@ -731,7 +730,7 @@ static void em28xx_audio_free_urb(struct em28xx *dev)
/* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */
static int em28xx_audio_ep_packet_size(struct usb_device *udev,
- struct usb_endpoint_descriptor *e)
+ struct usb_endpoint_descriptor *e)
{
int size = le16_to_cpu(e->wMaxPacketSize);
@@ -781,7 +780,7 @@ static int em28xx_audio_urb_init(struct em28xx *dev)
interval = 1 << (ep->bInterval - 1);
em28xx_info("Endpoint 0x%02x %s on intf %d alt %d interval = %d, size %d\n",
- EM28XX_EP_AUDIO, usb_speed_string(dev->udev->speed),
+ EM28XX_EP_AUDIO, usb_speed_string(dev->udev->speed),
dev->ifnum, alt,
interval,
ep_size);
@@ -27,7 +27,6 @@
#include "em28xx.h"
-
/* Possible i2c addresses of Micron sensors */
static unsigned short micron_sensor_addrs[] = {
0xb8 >> 1, /* MT9V111, MT9V403 */
@@ -43,7 +42,6 @@ static unsigned short omnivision_sensor_addrs[] = {
I2C_CLIENT_END
};
-
static struct soc_camera_link camlink = {
.bus_id = 0,
.flags = 0,
@@ -51,7 +49,6 @@ static struct soc_camera_link camlink = {
.unbalanced_power = true,
};
-
/* FIXME: Should be replaced by a proper mt9m111 driver */
static int em28xx_initialize_mt9m111(struct em28xx *dev)
{
@@ -70,7 +67,6 @@ static int em28xx_initialize_mt9m111(struct em28xx *dev)
return 0;
}
-
/* FIXME: Should be replaced by a proper mt9m001 driver */
static int em28xx_initialize_mt9m001(struct em28xx *dev)
{
@@ -98,7 +94,6 @@ static int em28xx_initialize_mt9m001(struct em28xx *dev)
return 0;
}
-
/*
* Probes Micron sensors with 8 bit address and 16 bit register width
*/
@@ -64,7 +64,6 @@ module_param(usb_xfer_mode, int, 0444);
MODULE_PARM_DESC(usb_xfer_mode,
"USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)");
-
/* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */
static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS);
@@ -190,8 +189,8 @@ static struct em28xx_reg_seq kworld_a340_digital[] = {
};
static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = {
- {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
- {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100},
+ {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100},
{EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100},
{ -1, -1, -1, -1},
@@ -301,7 +300,6 @@ static struct em28xx_reg_seq dikom_dk300_digital[] = {
{ -1, -1, -1, -1},
};
-
/* Reset for the most [digital] boards */
static struct em28xx_reg_seq leadership_digital[] = {
{EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10},
@@ -562,7 +560,6 @@ static struct em28xx_led pctv_80e_leds[] = {
{-1, 0, 0, 0},
};
-
/*
* Board definitions
*/
@@ -1528,7 +1525,7 @@ struct em28xx_board em28xx_boards[] = {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
- .aout = EM28XX_AOUT_MONO | /* I2S */
+ .aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE1,
@@ -1550,7 +1547,7 @@ struct em28xx_board em28xx_boards[] = {
.type = EM28XX_VMUX_TELEVISION,
.vmux = SAA7115_COMPOSITE2,
.amux = EM28XX_AMUX_VIDEO,
- .aout = EM28XX_AOUT_MONO | /* I2S */
+ .aout = EM28XX_AOUT_MONO | /* I2S */
EM28XX_AOUT_MASTER, /* Line out pin */
}, {
.type = EM28XX_VMUX_COMPOSITE1,
@@ -2496,6 +2493,7 @@ static struct em28xx_hash_table em28xx_i2c_hash[] = {
{0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF},
{0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT},
};
+
/* NOTE: introduce a separate hash table for devices with 16 bit eeproms */
int em28xx_tuner_callback(void *ptr, int component, int command, int arg)
@@ -2738,7 +2736,7 @@ static int em28xx_hint_board(struct em28xx *dev)
" insmod option:\n");
for (i = 0; i < em28xx_bcount; i++) {
em28xx_errdev(" card=%d -> %s\n",
- i, em28xx_boards[i].name);
+ i, em28xx_boards[i].name);
}
return -1;
}
@@ -3094,6 +3092,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
if (le16_to_cpu(dev->udev->descriptor.idVendor)
== 0xeb1a) {
__le16 idProd = dev->udev->descriptor.idProduct;
+
if (le16_to_cpu(idProd) == 0x2710)
chip_name = "em2710";
else if (le16_to_cpu(idProd) == 0x2820)
@@ -3182,7 +3181,7 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n",
- __func__, retval);
+ __func__, retval);
return retval;
}
@@ -3190,13 +3189,13 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
if (dev->def_i2c_bus) {
if (dev->is_em25xx)
retval = em28xx_i2c_register(dev, 1,
- EM28XX_I2C_ALGO_EM25XX_BUS_B);
+ EM28XX_I2C_ALGO_EM25XX_BUS_B);
else
retval = em28xx_i2c_register(dev, 1,
- EM28XX_I2C_ALGO_EM28XX);
+ EM28XX_I2C_ALGO_EM28XX);
if (retval < 0) {
em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n",
- __func__, retval);
+ __func__, retval);
em28xx_i2c_unregister(dev, 0);
@@ -3236,7 +3235,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
if (nr >= EM28XX_MAXBOARDS) {
/* No free device slots */
printk(DRIVER_NAME ": Supports only %i em28xx boards.\n",
- EM28XX_MAXBOARDS);
+ EM28XX_MAXBOARDS);
retval = -ENOMEM;
goto err_no_slot;
}
@@ -3420,6 +3419,7 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* Checks if audio is provided by a USB Audio Class interface */
for (i = 0; i < udev->config->desc.bNumInterfaces; i++) {
struct usb_interface *uif = udev->config->interface[i];
+
if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) {
if (has_vendor_audio)
em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n"
@@ -3530,7 +3530,7 @@ static void em28xx_usb_disconnect(struct usb_interface *interface)
}
static int em28xx_usb_suspend(struct usb_interface *interface,
- pm_message_t message)
+ pm_message_t message)
{
struct em28xx *dev;
@@ -75,7 +75,7 @@ MODULE_PARM_DESC(reg_debug, "enable debug messages [URB reg]");
* reads data from the usb device specifying bRequest
*/
int em28xx_read_reg_req_len(struct em28xx *dev, u8 req, u16 reg,
- char *buf, int len)
+ char *buf, int len)
{
int ret;
int pipe = usb_rcvctrlpipe(dev->udev, 0);
@@ -151,7 +151,7 @@ EXPORT_SYMBOL_GPL(em28xx_read_reg);
* sends data to the usb device, specifying bRequest
*/
int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
- int len)
+ int len)
{
int ret;
int pipe = usb_sndctrlpipe(dev->udev, 0);
@@ -213,7 +213,7 @@ EXPORT_SYMBOL_GPL(em28xx_write_reg);
* the actual value
*/
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
- u8 bitmask)
+ u8 bitmask)
{
int oldval;
u8 newval;
@@ -222,7 +222,7 @@ int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
if (oldval < 0)
return oldval;
- newval = (((u8) oldval) & ~bitmask) | (val & bitmask);
+ newval = (((u8)oldval) & ~bitmask) | (val & bitmask);
return em28xx_write_regs(dev, reg, &newval, 1);
}
@@ -314,7 +314,7 @@ int em28xx_write_ac97(struct em28xx *dev, u8 reg, u16 val)
if (ret < 0)
return ret;
- ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *) &value, 2);
+ ret = em28xx_write_regs(dev, EM28XX_R40_AC97LSB, (u8 *)&value, 2);
if (ret < 0)
return ret;
@@ -361,7 +361,7 @@ static int set_ac97_input(struct em28xx *dev)
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
- inputs[i].reg);
+ inputs[i].reg);
}
return 0;
}
@@ -445,7 +445,7 @@ int em28xx_audio_analog_set(struct em28xx *dev)
ret = em28xx_write_ac97(dev, outputs[i].reg, 0x8000);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
- outputs[i].reg);
+ outputs[i].reg);
}
}
@@ -483,7 +483,7 @@ int em28xx_audio_analog_set(struct em28xx *dev)
vol);
if (ret < 0)
em28xx_warn("couldn't setup AC97 register %d\n",
- outputs[i].reg);
+ outputs[i].reg);
}
if (dev->ctl_aoutput & EM28XX_AOUT_PCM_IN) {
@@ -531,7 +531,7 @@ int em28xx_audio_setup(struct em28xx *dev)
} else if ((cfg & EM28XX_CHIPCFG_AUDIOMASK) != EM28XX_CHIPCFG_AC97) {
dev->int_audio_type = EM28XX_INT_AUDIO_I2S;
if (dev->chip_id < CHIP_ID_EM2860 &&
- (cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
+ (cfg & EM28XX_CHIPCFG_AUDIOMASK) ==
EM2820_CHIPCFG_I2S_1_SAMPRATE)
i2s_samplerates = 1;
else if (dev->chip_id >= CHIP_ID_EM2860 &&
@@ -541,7 +541,7 @@ int em28xx_audio_setup(struct em28xx *dev)
else
i2s_samplerates = 3;
em28xx_info("I2S Audio (%d sample rate(s))\n",
- i2s_samplerates);
+ i2s_samplerates);
/* Skip the code that does AC97 vendor detection */
dev->audio_mode.ac97 = EM28XX_NO_AC97;
goto init_audio;
@@ -614,8 +614,9 @@ const struct em28xx_led *em28xx_find_led(struct em28xx *dev,
{
if (dev->board.leds) {
u8 k = 0;
+
while (dev->board.leds[k].role >= 0 &&
- dev->board.leds[k].role < EM28XX_NUM_LED_ROLES) {
+ dev->board.leds[k].role < EM28XX_NUM_LED_ROLES) {
if (dev->board.leds[k].role == role)
return &dev->board.leds[k];
k++;
@@ -658,10 +659,10 @@ int em28xx_capture_start(struct em28xx *dev, int start)
if (dev->mode == EM28XX_ANALOG_MODE)
rc = em28xx_write_reg(dev,
- EM28XX_R12_VINENABLE, 0x67);
+ EM28XX_R12_VINENABLE, 0x67);
else
rc = em28xx_write_reg(dev,
- EM28XX_R12_VINENABLE, 0x37);
+ EM28XX_R12_VINENABLE, 0x37);
if (rc < 0)
return rc;
@@ -815,7 +816,7 @@ void em28xx_uninit_usb_xfer(struct em28xx *dev, enum em28xx_mode mode)
if (usb_bufs->transfer_buffer[i]) {
usb_free_coherent(dev->udev,
- urb->transfer_buffer_length,
+ urb->transfer_buffer_length,
usb_bufs->transfer_buffer[i],
urb->transfer_dma);
}
@@ -889,7 +890,7 @@ int em28xx_alloc_urbs(struct em28xx *dev, enum em28xx_mode mode, int xfer_bulk,
if ((xfer_bulk && !dev->analog_ep_bulk) ||
(!xfer_bulk && !dev->analog_ep_isoc)) {
em28xx_errdev("no endpoint for analog mode and transfer type %d\n",
- xfer_bulk > 0);
+ xfer_bulk > 0);
return -EINVAL;
}
usb_bufs = &dev->usb_ctl.analog_bufs;
@@ -988,9 +989,9 @@ EXPORT_SYMBOL_GPL(em28xx_alloc_urbs);
* Allocate URBs and start IRQ
*/
int em28xx_init_usb_xfer(struct em28xx *dev, enum em28xx_mode mode,
- int xfer_bulk, int num_bufs, int max_pkt_size,
+ int xfer_bulk, int num_bufs, int max_pkt_size,
int packet_multiplier,
- int (*urb_data_copy) (struct em28xx *dev, struct urb *urb))
+ int (*urb_data_copy)(struct em28xx *dev, struct urb *urb))
{
struct em28xx_dmaqueue *dma_q = &dev->vidq;
struct em28xx_dmaqueue *vbi_dma_q = &dev->vbiq;
@@ -63,7 +63,6 @@ MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRIVER_DESC " - digital TV interface");
MODULE_VERSION(EM28XX_VERSION);
-
static unsigned int debug;
module_param(debug, int, 0644);
MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
@@ -71,7 +70,7 @@ MODULE_PARM_DESC(debug, "enable debug messages [dvb]");
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
#define dprintk(level, fmt, arg...) do { \
-if (debug >= level) \
+if (debug >= level) \
printk(KERN_DEBUG "%s/2-dvb: " fmt, dev->name, ## arg); \
} while (0)
@@ -99,9 +98,8 @@ struct em28xx_dvb {
struct i2c_client *i2c_client_tuner;
};
-
static inline void print_err_status(struct em28xx *dev,
- int packet, int status)
+ int packet, int status)
{
char *errmsg = "Unknown";
@@ -169,7 +167,7 @@ static inline int em28xx_dvb_urb_data_copy(struct em28xx *dev, struct urb *urb)
if (!urb->actual_length)
continue;
dvb_dmx_swfilter(&dev->dvb->demux, urb->transfer_buffer,
- urb->actual_length);
+ urb->actual_length);
} else {
if (urb->iso_frame_desc[i].status < 0) {
print_err_status(dev, i,
@@ -280,7 +278,6 @@ static int em28xx_stop_feed(struct dvb_demux_feed *feed)
}
-
/* ------------------------------------------------------------------ */
static int em28xx_dvb_bus_ctrl(struct dvb_frontend *fe, int acquire)
{
@@ -740,7 +737,7 @@ static int em28xx_pctv_290e_set_lna(struct dvb_frontend *fe)
return ret;
#else
dev_warn(&dev->udev->dev, "%s: LNA control is disabled (lna=%u)\n",
- KBUILD_MODNAME, c->lna);
+ KBUILD_MODNAME, c->lna);
return 0;
#endif
}
@@ -830,6 +827,7 @@ static struct zl10353_config em28xx_zl10353_no_i2c_gate_dev = {
.no_tuner = 1,
.parallel_ts = 1,
};
+
static struct qt1010_config em28xx_qt1010_config = {
.i2c_address = 0x62
};
@@ -861,7 +859,6 @@ static const struct m88ds3103_config pctv_461e_m88ds3103_config = {
.agc = 0x99,
};
-
static struct tda18271_std_map drx_j_std_map = {
.atsc_6 = { .if_freq = 5000, .agc_mode = 3, .std = 0, .if_lvl = 1,
.rfagc_top = 0x37, },
@@ -948,7 +945,7 @@ static int em28xx_register_dvb(struct em28xx_dvb *dvb, struct module *module,
result = dvb_register_frontend(&dvb->adapter, dvb->fe[1]);
if (result < 0) {
printk(KERN_WARNING "%s: 2nd dvb_register_frontend failed (errno = %d)\n",
- dev->name, result);
+ dev->name, result);
goto fail_frontend1;
}
}
@@ -1182,7 +1179,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
&dev->i2c_adap[dev->def_i2c_bus]);
if (dvb->fe[0] != NULL) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap[dev->def_i2c_bus], 0x61, TUNER_THOMSON_DTT761X)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x61, TUNER_THOMSON_DTT761X)) {
result = -EINVAL;
goto out_free;
}
@@ -1204,7 +1201,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
&dev->i2c_adap[dev->def_i2c_bus], 0x48);
if (dvb->fe[0]) {
if (!dvb_attach(simple_tuner_attach, dvb->fe[0],
- &dev->i2c_adap[dev->def_i2c_bus], 0x60, TUNER_PHILIPS_CU1216L)) {
+ &dev->i2c_adap[dev->def_i2c_bus], 0x60, TUNER_PHILIPS_CU1216L)) {
result = -EINVAL;
goto out_free;
}
@@ -1219,7 +1216,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
goto out_free;
}
if (!dvb_attach(tda18271_attach, dvb->fe[0], 0x60,
- &dev->i2c_adap[dev->def_i2c_bus],
+ &dev->i2c_adap[dev->def_i2c_bus],
&kworld_a340_config)) {
dvb_frontend_detach(dvb->fe[0]);
result = -EINVAL;
@@ -1250,10 +1247,10 @@ static int em28xx_dvb_init(struct em28xx *dev)
#ifdef CONFIG_GPIOLIB
/* enable LNA for DVB-T, DVB-T2 and DVB-C */
result = gpio_request_one(dvb->lna_gpio,
- GPIOF_OUT_INIT_LOW, NULL);
+ GPIOF_OUT_INIT_LOW, NULL);
if (result)
em28xx_errdev("gpio request failed %d\n",
- result);
+ result);
else
gpio_free(dvb->lna_gpio);
@@ -1266,6 +1263,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C:
{
struct xc5000_config cfg;
+
hauppauge_hvr930c_init(dev);
dvb->fe[0] = dvb_attach(drxk_attach,
@@ -1339,7 +1337,7 @@ static int em28xx_dvb_init(struct em28xx *dev)
/* attach SEC */
if (dvb->fe[0])
dvb_attach(a8293_attach, dvb->fe[0], &dev->i2c_adap[dev->def_i2c_bus],
- &em28xx_a8293_config);
+ &em28xx_a8293_config);
break;
case EM2874_BOARD_DELOCK_61959:
case EM2874_BOARD_MAXMEDIA_UB425_TC:
@@ -593,6 +593,7 @@ static inline unsigned long em28xx_hash_mem(char *buf, int length, int bits)
unsigned long l = 0;
int len = 0;
unsigned char c;
+
do {
if (len == length) {
c = (char)len;
@@ -950,7 +951,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
retval = i2c_add_adapter(&dev->i2c_adap[bus]);
if (retval < 0) {
em28xx_errdev("%s: i2c_add_adapter failed! retval [%d]\n",
- __func__, retval);
+ __func__, retval);
return retval;
}
@@ -962,7 +963,7 @@ int em28xx_i2c_register(struct em28xx *dev, unsigned bus,
retval = em28xx_i2c_eeprom(dev, bus, &dev->eedata, &dev->eedata_len);
if ((retval < 0) && (retval != -ENODEV)) {
em28xx_errdev("%s: em28xx_i2_eeprom failed! retval [%d]\n",
- __func__, retval);
+ __func__, retval);
return retval;
}
@@ -459,7 +459,7 @@ static int em28xx_ir_change_protocol(struct rc_dev *rc_dev, u64 *rc_type)
return em2874_ir_change_protocol(rc_dev, rc_type);
default:
printk("Unrecognized em28xx chip id 0x%02x: IR not supported\n",
- dev->chip_id);
+ dev->chip_id);
return -EINVAL;
}
}
@@ -505,7 +505,7 @@ static void em28xx_query_buttons(struct work_struct *work)
/* Check states of the buttons and act */
j = 0;
while (dev->board.buttons[j].role >= 0 &&
- dev->board.buttons[j].role < EM28XX_NUM_BUTTON_ROLES) {
+ dev->board.buttons[j].role < EM28XX_NUM_BUTTON_ROLES) {
struct em28xx_button *button = &dev->board.buttons[j];
/* Check if button uses the current address */
if (button->reg_r != dev->button_polling_addresses[i]) {
@@ -607,7 +607,7 @@ static void em28xx_init_buttons(struct em28xx *dev)
dev->button_polling_interval = EM28XX_BUTTONS_DEBOUNCED_QUERY_INTERVAL;
while (dev->board.buttons[i].role >= 0 &&
- dev->board.buttons[i].role < EM28XX_NUM_BUTTON_ROLES) {
+ dev->board.buttons[i].role < EM28XX_NUM_BUTTON_ROLES) {
struct em28xx_button *button = &dev->board.buttons[i];
/* Check if polling address is already on the list */
addr_new = true;
@@ -653,11 +653,11 @@ next_button:
/* Start polling */
if (dev->num_button_polling_addresses) {
memset(dev->button_polling_last_values, 0,
- EM28XX_NUM_BUTTON_ADDRESSES_MAX);
+ EM28XX_NUM_BUTTON_ADDRESSES_MAX);
INIT_DELAYED_WORK(&dev->buttons_query_work,
- em28xx_query_buttons);
+ em28xx_query_buttons);
schedule_delayed_work(&dev->buttons_query_work,
- msecs_to_jiffies(dev->button_polling_interval));
+ msecs_to_jiffies(dev->button_polling_interval));
}
}
@@ -886,7 +886,7 @@ static int em28xx_ir_resume(struct em28xx *dev)
schedule_delayed_work(&ir->work, msecs_to_jiffies(ir->polling));
if (dev->num_button_polling_addresses)
schedule_delayed_work(&dev->buttons_query_work,
- msecs_to_jiffies(dev->button_polling_interval));
+ msecs_to_jiffies(dev->button_polling_interval));
return 0;
}
@@ -49,7 +49,6 @@
#define EM28XX_CHIPCFG2_TS_PACKETSIZE_564 0x02
#define EM28XX_CHIPCFG2_TS_PACKETSIZE_752 0x03
-
/* GPIO/GPO registers */
#define EM2880_R04_GPO 0x04 /* em2880-em2883 only */
#define EM2820_R08_GPIO_CTRL 0x08 /* em2820-em2873/83 only */
@@ -68,7 +67,6 @@
#define EM28XX_I2C_FREQ_400_KHZ 0x01
#define EM28XX_I2C_FREQ_100_KHZ 0x00
-
#define EM28XX_R0A_CHIPID 0x0a
#define EM28XX_R0C_USBSUSP 0x0c
#define EM28XX_R0C_USBSUSP_SNAPSHOT 0x20 /* 1=button pressed, needs reset */
@@ -157,7 +155,6 @@
#define EM28XX_OUTFMT_YUV422_Y1UY0V 0x15
#define EM28XX_OUTFMT_YUV411 0x18
-
#define EM28XX_R28_XMIN 0x28
#define EM28XX_R29_XMAX 0x29
#define EM28XX_R2A_YMIN 0x2a
@@ -14,7 +14,6 @@
GNU General Public License for more details.
*/
-
int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count);
void em28xx_stop_vbi_streaming(struct vb2_queue *vq);
extern struct vb2_ops em28xx_vbi_qops;
@@ -92,7 +92,6 @@ vbi_buffer_queue(struct vb2_buffer *vb)
spin_unlock_irqrestore(&dev->slock, flags);
}
-
struct vb2_ops em28xx_vbi_qops = {
.queue_setup = vbi_queue_setup,
.buf_prepare = vbi_buffer_prepare,
@@ -81,7 +81,6 @@ MODULE_DESCRIPTION(DRIVER_DESC " - v4l2 interface");
MODULE_LICENSE("GPL");
MODULE_VERSION(EM28XX_VERSION);
-
#define EM25XX_FRMDATAHDR_BYTE1 0x02
#define EM25XX_FRMDATAHDR_BYTE2_STILL_IMAGE 0x20
#define EM25XX_FRMDATAHDR_BYTE2_FRAME_END 0x02
@@ -90,7 +89,6 @@ MODULE_VERSION(EM28XX_VERSION);
EM25XX_FRMDATAHDR_BYTE2_FRAME_END | \
EM25XX_FRMDATAHDR_BYTE2_FRAME_ID)
-
static unsigned int video_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int vbi_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
static unsigned int radio_nr[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
@@ -194,9 +192,10 @@ static int em28xx_vbi_supported(struct em28xx *dev)
static void em28xx_wake_i2c(struct em28xx *dev)
{
struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
+
v4l2_device_call_all(v4l2_dev, 0, core, reset, 0);
v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
- INPUT(dev->ctl_input)->vmux, 0, 0);
+ INPUT(dev->ctl_input)->vmux, 0, 0);
v4l2_device_call_all(v4l2_dev, 0, video, s_stream, 0);
}
@@ -275,7 +274,7 @@ static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
}
static void em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
- u16 width, u16 height)
+ u16 width, u16 height)
{
u8 cwidth = width >> 2;
u8 cheight = height >> 2;
@@ -283,7 +282,7 @@ static void em28xx_capture_area_set(struct em28xx *dev, u8 hstart, u8 vstart,
/* NOTE: size limit: 2047x1023 = 2MPix */
em28xx_videodbg("capture area set to (%d,%d): %dx%d\n",
- hstart, vstart,
+ hstart, vstart,
((overflow & 2) << 9 | cwidth << 2),
((overflow & 1) << 10 | cheight << 2));
@@ -406,13 +405,13 @@ set_alt:
dev->packet_multiplier = EM28XX_BULK_PACKET_MULTIPLIER;
} else { /* isoc */
em28xx_videodbg("minimum isoc packet size: %u (alt=%d)\n",
- min_pkt_size, dev->alt);
+ min_pkt_size, dev->alt);
dev->max_pkt_size =
dev->alt_max_pkt_size_isoc[dev->alt];
dev->packet_multiplier = EM28XX_NUM_ISOC_PACKETS;
}
em28xx_videodbg("setting alternate %d with wMaxPacketSize=%u\n",
- dev->alt, dev->max_pkt_size);
+ dev->alt, dev->max_pkt_size);
errCode = usb_set_interface(dev->udev, dev->ifnum, dev->alt);
if (errCode < 0) {
em28xx_errdev("cannot change alternate number to %d (error=%i)\n",
@@ -482,7 +481,7 @@ static void em28xx_copy_video(struct em28xx *dev,
if ((char *)startwrite + lencopy > (char *)buf->vb_buf + buf->length) {
em28xx_isocdbg("Overflow of %zu bytes past buffer end (1)\n",
- ((char *)startwrite + lencopy) -
+ ((char *)startwrite + lencopy) -
((char *)buf->vb_buf + buf->length));
remain = (char *)buf->vb_buf + buf->length -
(char *)startwrite;
@@ -548,7 +547,7 @@ static void em28xx_copy_vbi(struct em28xx *dev,
}
static inline void print_err_status(struct em28xx *dev,
- int packet, int status)
+ int packet, int status)
{
char *errmsg = "Unknown";
@@ -831,7 +830,6 @@ static inline int em28xx_urb_data_copy(struct em28xx *dev, struct urb *urb)
return 1;
}
-
static int get_ressource(enum v4l2_buf_type f_type)
{
switch (f_type) {
@@ -1003,6 +1001,7 @@ static void em28xx_stop_streaming(struct vb2_queue *vq)
}
while (!list_empty(&vidq->active)) {
struct em28xx_buffer *buf;
+
buf = list_entry(vidq->active.next, struct em28xx_buffer, list);
list_del(&buf->list);
vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
@@ -1033,6 +1032,7 @@ void em28xx_stop_vbi_streaming(struct vb2_queue *vq)
}
while (!list_empty(&vbiq->active)) {
struct em28xx_buffer *buf;
+
buf = list_entry(vbiq->active.next, struct em28xx_buffer, list);
list_del(&buf->list);
vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR);
@@ -1109,6 +1109,7 @@ static int em28xx_vb2_setup(struct em28xx *dev)
static void video_mux(struct em28xx *dev, int index)
{
struct v4l2_device *v4l2_dev = &dev->v4l2->v4l2_dev;
+
dev->ctl_input = index;
dev->ctl_ainput = INPUT(index)->amux;
dev->ctl_aoutput = INPUT(index)->aout;
@@ -1117,21 +1118,21 @@ static void video_mux(struct em28xx *dev, int index)
dev->ctl_aoutput = EM28XX_AOUT_MASTER;
v4l2_device_call_all(v4l2_dev, 0, video, s_routing,
- INPUT(index)->vmux, 0, 0);
+ INPUT(index)->vmux, 0, 0);
if (dev->board.has_msp34xx) {
if (dev->i2s_speed) {
v4l2_device_call_all(v4l2_dev, 0, audio,
- s_i2s_clock_freq, dev->i2s_speed);
+ s_i2s_clock_freq, dev->i2s_speed);
}
/* Note: this is msp3400 specific */
v4l2_device_call_all(v4l2_dev, 0, audio, s_routing,
- dev->ctl_ainput, MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0);
+ dev->ctl_ainput, MSP_OUTPUT(MSP_SC_IN_DSP_SCART1), 0);
}
if (dev->board.adecoder != EM28XX_NOADECODER) {
v4l2_device_call_all(v4l2_dev, 0, audio, s_routing,
- dev->ctl_ainput, dev->ctl_aoutput, 0);
+ dev->ctl_ainput, dev->ctl_aoutput, 0);
}
em28xx_audio_analog_set(dev);
@@ -1203,7 +1204,7 @@ static const struct v4l2_ctrl_ops em28xx_ctrl_ops = {
};
static void size_to_scale(struct em28xx *dev,
- unsigned int width, unsigned int height,
+ unsigned int width, unsigned int height,
unsigned int *hscale, unsigned int *vscale)
{
unsigned int maxw = norm_maxw(dev);
@@ -1234,7 +1235,7 @@ static void scale_to_size(struct em28xx *dev,
------------------------------------------------------------------*/
static int vidioc_g_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
+ struct v4l2_format *f)
{
struct em28xx *dev = video_drvdata(file);
struct em28xx_v4l2 *v4l2 = dev->v4l2;
@@ -1267,7 +1268,7 @@ static struct em28xx_fmt *format_by_fourcc(unsigned int fourcc)
}
static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
+ struct v4l2_format *f)
{
struct em28xx *dev = video_drvdata(file);
struct em28xx_v4l2 *v4l2 = dev->v4l2;
@@ -1338,7 +1339,7 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
/* set new image size */
size_to_scale(dev, v4l2->width, v4l2->height,
- &v4l2->hscale, &v4l2->vscale);
+ &v4l2->hscale, &v4l2->vscale);
em28xx_resolution_set(dev);
@@ -1346,7 +1347,7 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
}
static int vidioc_s_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_format *f)
+ struct v4l2_format *f)
{
struct em28xx *dev = video_drvdata(file);
struct em28xx_v4l2 *v4l2 = dev->v4l2;
@@ -1401,7 +1402,7 @@ static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id norm)
v4l2->width = f.fmt.pix.width;
v4l2->height = f.fmt.pix.height;
size_to_scale(dev, v4l2->width, v4l2->height,
- &v4l2->hscale, &v4l2->vscale);
+ &v4l2->hscale, &v4l2->vscale);
em28xx_resolution_set(dev);
v4l2_device_call_all(&v4l2->v4l2_dev, 0, video, s_std, v4l2->norm);
@@ -1422,7 +1423,7 @@ static int vidioc_g_parm(struct file *file, void *priv,
video, g_parm, p);
else
v4l2_video_std_frame_period(v4l2->norm,
- &p->parm.capture.timeperframe);
+ &p->parm.capture.timeperframe);
return rc;
}
@@ -1450,7 +1451,7 @@ static const char *iname[] = {
};
static int vidioc_enum_input(struct file *file, void *priv,
- struct v4l2_input *i)
+ struct v4l2_input *i)
{
struct em28xx *dev = video_drvdata(file);
unsigned int n;
@@ -1467,7 +1468,7 @@ static int vidioc_enum_input(struct file *file, void *priv,
strcpy(i->name, iname[INPUT(n)->type]);
if ((EM28XX_VMUX_TELEVISION == INPUT(n)->type) ||
- (EM28XX_VMUX_CABLE == INPUT(n)->type))
+ (EM28XX_VMUX_CABLE == INPUT(n)->type))
i->type = V4L2_INPUT_TYPE_TUNER;
i->std = dev->v4l2->vdev->tvnorms;
@@ -1558,7 +1559,7 @@ static int vidioc_s_audio(struct file *file, void *priv, const struct v4l2_audio
}
static int vidioc_g_tuner(struct file *file, void *priv,
- struct v4l2_tuner *t)
+ struct v4l2_tuner *t)
{
struct em28xx *dev = video_drvdata(file);
@@ -1572,7 +1573,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
}
static int vidioc_s_tuner(struct file *file, void *priv,
- const struct v4l2_tuner *t)
+ const struct v4l2_tuner *t)
{
struct em28xx *dev = video_drvdata(file);
@@ -1584,7 +1585,7 @@ static int vidioc_s_tuner(struct file *file, void *priv,
}
static int vidioc_g_frequency(struct file *file, void *priv,
- struct v4l2_frequency *f)
+ struct v4l2_frequency *f)
{
struct em28xx *dev = video_drvdata(file);
struct em28xx_v4l2 *v4l2 = dev->v4l2;
@@ -1597,7 +1598,7 @@ static int vidioc_g_frequency(struct file *file, void *priv,
}
static int vidioc_s_frequency(struct file *file, void *priv,
- const struct v4l2_frequency *f)
+ const struct v4l2_frequency *f)
{
struct v4l2_frequency new_freq = *f;
struct em28xx *dev = video_drvdata(file);
@@ -1615,7 +1616,7 @@ static int vidioc_s_frequency(struct file *file, void *priv,
#ifdef CONFIG_VIDEO_ADV_DEBUG
static int vidioc_g_chip_info(struct file *file, void *priv,
- struct v4l2_dbg_chip_info *chip)
+ struct v4l2_dbg_chip_info *chip)
{
struct em28xx *dev = video_drvdata(file);
@@ -1670,6 +1671,7 @@ static int vidioc_g_register(struct file *file, void *priv,
reg->val = ret;
} else {
__le16 val = 0;
+
ret = dev->em28xx_read_reg_req_len(dev, USB_REQ_GET_STATUS,
reg->reg, (char *)&val, 2);
if (ret < 0)
@@ -1700,9 +1702,8 @@ static int vidioc_s_register(struct file *file, void *priv,
}
#endif
-
static int vidioc_querycap(struct file *file, void *priv,
- struct v4l2_capability *cap)
+ struct v4l2_capability *cap)
{
struct video_device *vdev = video_devdata(file);
struct em28xx *dev = video_drvdata(file);
@@ -1736,7 +1737,7 @@ static int vidioc_querycap(struct file *file, void *priv,
}
static int vidioc_enum_fmt_vid_cap(struct file *file, void *priv,
- struct v4l2_fmtdesc *f)
+ struct v4l2_fmtdesc *f)
{
if (unlikely(f->index >= ARRAY_SIZE(format)))
return -EINVAL;
@@ -2178,7 +2179,7 @@ static unsigned short msp3400_addrs[] = {
/******************************** usb interface ******************************/
static struct video_device *em28xx_vdev_init(struct em28xx *dev,
- const struct video_device *template,
+ const struct video_device *template,
const char *type_name)
{
struct video_device *vfd;
@@ -2344,12 +2345,12 @@ static int em28xx_v4l2_init(struct em28xx *dev)
if (dev->board.radio.type)
v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus],
+ &dev->i2c_adap[dev->def_i2c_bus],
"tuner", dev->board.radio_addr, NULL);
if (has_demod)
v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus], "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
if (tuner_addr == 0) {
enum v4l2_i2c_tuner_type type =
@@ -2357,7 +2358,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
struct v4l2_subdev *sd;
sd = v4l2_i2c_new_subdev(&v4l2->v4l2_dev,
- &dev->i2c_adap[dev->def_i2c_bus], "tuner",
+ &dev->i2c_adap[dev->def_i2c_bus], "tuner",
0, v4l2_i2c_tuner_addrs(type));
if (sd)
@@ -2378,20 +2379,20 @@ static int em28xx_v4l2_init(struct em28xx *dev)
ret = em28xx_audio_setup(dev);
if (ret < 0) {
em28xx_errdev("%s: Error while setting audio - error [%d]!\n",
- __func__, ret);
+ __func__, ret);
goto unregister_dev;
}
if (dev->audio_mode.ac97 != EM28XX_NO_AC97) {
v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
+ V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1);
v4l2_ctrl_new_std(hdl, &em28xx_ctrl_ops,
- V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
+ V4L2_CID_AUDIO_VOLUME, 0, 0x1f, 1, 0x1f);
} else {
/* install the em28xx notify callback */
v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_MUTE),
- em28xx_ctrl_notify, dev);
+ em28xx_ctrl_notify, dev);
v4l2_ctrl_notify(v4l2_ctrl_find(hdl, V4L2_CID_AUDIO_VOLUME),
- em28xx_ctrl_notify, dev);
+ em28xx_ctrl_notify, dev);
}
/* wake i2c devices */
@@ -2518,7 +2519,7 @@ static int em28xx_v4l2_init(struct em28xx *dev)
/* register v4l2 video video_device */
ret = video_register_device(v4l2->vdev, VFL_TYPE_GRABBER,
- video_nr[dev->devno]);
+ video_nr[dev->devno]);
if (ret) {
em28xx_errdev("unable to register video device (error=%i).\n",
ret);
@@ -217,7 +217,6 @@ enum em28xx_mode {
EM28XX_DIGITAL_MODE,
};
-
struct em28xx;
struct em28xx_usb_bufs {
@@ -245,11 +244,11 @@ struct em28xx_usb_ctl {
struct em28xx_usb_bufs digital_bufs;
/* Stores already requested buffers */
- struct em28xx_buffer *vid_buf;
- struct em28xx_buffer *vbi_buf;
+ struct em28xx_buffer *vid_buf;
+ struct em28xx_buffer *vbi_buf;
/* copy data from URB */
- int (*urb_data_copy) (struct em28xx *dev, struct urb *urb);
+ int (*urb_data_copy)(struct em28xx *dev, struct urb *urb);
};
@@ -697,14 +696,14 @@ struct em28xx {
char urb_buf[URB_MAX_CTRL_SIZE]; /* urb control msg buffer */
/* helper funcs that call usb_control_msg */
- int (*em28xx_write_regs) (struct em28xx *dev, u16 reg,
- char *buf, int len);
- int (*em28xx_read_reg) (struct em28xx *dev, u16 reg);
- int (*em28xx_read_reg_req_len) (struct em28xx *dev, u8 req, u16 reg,
- char *buf, int len);
- int (*em28xx_write_regs_req) (struct em28xx *dev, u8 req, u16 reg,
- char *buf, int len);
- int (*em28xx_read_reg_req) (struct em28xx *dev, u8 req, u16 reg);
+ int (*em28xx_write_regs)(struct em28xx *dev, u16 reg,
+ char *buf, int len);
+ int (*em28xx_read_reg)(struct em28xx *dev, u16 reg);
+ int (*em28xx_read_reg_req_len)(struct em28xx *dev, u8 req, u16 reg,
+ char *buf, int len);
+ int (*em28xx_write_regs_req)(struct em28xx *dev, u8 req, u16 reg,
+ char *buf, int len);
+ int (*em28xx_read_reg_req)(struct em28xx *dev, u8 req, u16 reg);
enum em28xx_mode mode;
@@ -747,7 +746,7 @@ int em28xx_write_regs_req(struct em28xx *dev, u8 req, u16 reg, char *buf,
int em28xx_write_regs(struct em28xx *dev, u16 reg, char *buf, int len);
int em28xx_write_reg(struct em28xx *dev, u16 reg, u8 val);
int em28xx_write_reg_bits(struct em28xx *dev, u16 reg, u8 val,
- u8 bitmask);
+ u8 bitmask);
int em28xx_toggle_reg_bits(struct em28xx *dev, u16 reg, u8 bitmask);
int em28xx_read_ac97(struct em28xx *dev, u8 reg);
This patch is basically produced while testing a tool that Joe Perches sent upstream sometime ago: https://lkml.org/lkml/2014/7/11/794 I used it with those arguments: scripts/reformat_with_checkpatch.sh drivers/media/usb/em28xx/em28xx*.[ch] It actually produced 24 patches, with is too much, and showed interesting things: gcc produced different codes on most of the patches, even with just linespace changes. The total code data remained the same on all cases I checked though. Anyway, provided that we fold the resulting patches, this tool seems useful. Signed-off-by: Mauro Carvalho Chehab <mchehab@osg.samsung.com>