@@ -201,8 +201,7 @@ static int alloc_and_submit_int_urb(struct gspca_dev *gspca_dev,
buffer_len = le16_to_cpu(ep->wMaxPacketSize);
interval = ep->bInterval;
- PDEBUG(D_CONF, "found int in endpoint: 0x%x, "
- "buffer_len=%u, interval=%u",
+ PDEBUG(D_CONF, "found int in endpoint: 0x%x, buffer_len=%u, interval=%u",
ep->bEndpointAddress, buffer_len, interval);
dev = gspca_dev->dev;
@@ -154,8 +154,8 @@ int m5602_read_sensor(struct sd *sd, const u8 address,
err = m5602_read_bridge(sd, M5602_XB_I2C_DATA, &(i2c_data[i]));
- PDEBUG(D_CONF, "Reading sensor register "
- "0x%x containing 0x%x ", address, *i2c_data);
+ PDEBUG(D_CONF, "Reading sensor register 0x%x containing 0x%x ",
+ address, *i2c_data);
}
return err;
}
@@ -441,13 +441,10 @@ MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
module_param(force_sensor, int, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(force_sensor,
- "forces detection of a sensor, "
- "1 = OV9650, 2 = S5K83A, 3 = S5K4AA, "
- "4 = MT9M111, 5 = PO1030, 6 = OV7660");
+ "forces detection of a sensor, 1 = OV9650, 2 = S5K83A, 3 = S5K4AA, 4 = MT9M111, 5 = PO1030, 6 = OV7660");
module_param(dump_bridge, bool, S_IRUGO | S_IWUSR);
MODULE_PARM_DESC(dump_bridge, "Dumps all usb bridge registers at startup");
module_param(dump_sensor, bool, S_IRUGO | S_IWUSR);
-MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers "
- "at startup providing a sensor is found");
+MODULE_PARM_DESC(dump_sensor, "Dumps all usb sensor registers at startup providing a sensor is found");
@@ -72,8 +72,7 @@
#define MR97310A_MIN_CLOCKDIV_MAX 8
#define MR97310A_MIN_CLOCKDIV_DEFAULT 3
-MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>,"
- "Theodore Kilgore <kilgota@auburn.edu>");
+MODULE_AUTHOR("Kyle Guinn <elyk03@gmail.com>,Theodore Kilgore <kilgota@auburn.edu>");
MODULE_DESCRIPTION("GSPCA/Mars-Semi MR97310A USB Camera Driver");
MODULE_LICENSE("GPL");
@@ -4326,8 +4326,7 @@ static void ov511_pkt_scan(struct gspca_dev *gspca_dev,
/* Frame end */
if ((in[9] + 1) * 8 != gspca_dev->pixfmt.width ||
(in[10] + 1) * 8 != gspca_dev->pixfmt.height) {
- PERR("Invalid frame size, got: %dx%d,"
- " requested: %dx%d\n",
+ PERR("Invalid frame size, got: %dx%d, requested: %dx%d\n",
(in[9] + 1) * 8, (in[10] + 1) * 8,
gspca_dev->pixfmt.width,
gspca_dev->pixfmt.height);
@@ -179,8 +179,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
}
PDEBUG(D_PROBE,
- "Pixart PAC207BCA Image Processor and Control Chip detected"
- " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+ "Pixart PAC207BCA Image Processor and Control Chip detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
cam = &gspca_dev->cam;
cam->cam_mode = sif_mode;
@@ -105,8 +105,7 @@
#define PAC7302_EXPOSURE_DEFAULT 66 /* 33 ms / 30 fps */
#define PAC7302_EXPOSURE_KNEE 133 /* 66 ms / 15 fps */
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
- "Thomas Kaiser thomas@kaiser-linux.li");
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Thomas Kaiser thomas@kaiser-linux.li");
MODULE_DESCRIPTION("Pixart PAC7302");
MODULE_LICENSE("GPL");
@@ -29,8 +29,7 @@
#include <linux/dmi.h>
-MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
- "microdia project <microdia@googlegroups.com>");
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, microdia project <microdia@googlegroups.com>");
MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
MODULE_LICENSE("GPL");
@@ -1948,8 +1947,7 @@ static int sd_isoc_init(struct gspca_dev *gspca_dev)
intf = usb_ifnum_to_if(gspca_dev->dev, gspca_dev->iface);
if (intf->num_altsetting != 9) {
- pr_warn("sn9c20x camera with unknown number of alt "
- "settings (%d), please report!\n",
+ pr_warn("sn9c20x camera with unknown number of alt settings (%d), please report!\n",
intf->num_altsetting);
gspca_dev->alt = intf->num_altsetting;
return 0;
@@ -41,8 +41,7 @@
#include <linux/slab.h>
#include "gspca.h"
-MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, "
- "Theodore Kilgore <kilgota@auburn.edu>");
+MODULE_AUTHOR("Adam Baker <linux@baker-net.org.uk>, Theodore Kilgore <kilgota@auburn.edu>");
MODULE_DESCRIPTION("GSPCA/SQ905 USB Camera Driver");
MODULE_LICENSE("GPL");
@@ -210,8 +210,8 @@ static int sd_config(struct gspca_dev *gspca_dev,
int ret;
PDEBUG(D_PROBE,
- "SQ9050 camera detected"
- " (vid/pid 0x%04X:0x%04X)", id->idVendor, id->idProduct);
+ "SQ9050 camera detected (vid/pid 0x%04X:0x%04X)",
+ id->idVendor, id->idProduct);
ret = sq905c_command(gspca_dev, SQ905C_GET_ID, 0);
if (ret < 0) {
@@ -412,8 +412,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
len -= 4;
if (len < chunk_len) {
- PERR("URB packet length is smaller"
- " than the specified chunk length");
+ PERR("URB packet length is smaller than the specified chunk length");
gspca_dev->last_packet_type = DISCARD_PACKET;
return;
}
@@ -455,8 +454,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
sd->to_skip = gspca_dev->pixfmt.width * 4;
if (chunk_len)
- PERR("Chunk length is "
- "non-zero on a SOF");
+ PERR("Chunk length is non-zero on a SOF");
break;
case 0x8002:
@@ -469,8 +467,7 @@ static void stv06xx_pkt_scan(struct gspca_dev *gspca_dev,
NULL, 0);
if (chunk_len)
- PERR("Chunk length is "
- "non-zero on a EOF");
+ PERR("Chunk length is non-zero on a EOF");
break;
case 0x0005:
@@ -368,8 +368,7 @@ static void spca504_read_info(struct gspca_dev *gspca_dev)
info[i] = gspca_dev->usb_buf[0];
}
PDEBUG(D_STREAM,
- "Read info: %d %d %d %d %d %d."
- " Should be 1,0,2,2,0,0",
+ "Read info: %d %d %d %d %d %d. Should be 1,0,2,2,0,0",
info[0], info[1], info[2],
info[3], info[4], info[5]);
}
@@ -24,8 +24,7 @@
#include "gspca.h"
MODULE_DESCRIPTION("Topro TP6800/6810 gspca webcam driver");
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
- "Anders Blomdell <anders.blomdell@control.lth.se>");
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Anders Blomdell <anders.blomdell@control.lth.se>");
MODULE_LICENSE("GPL");
static int force_sensor = -1;
@@ -25,8 +25,7 @@
#include "gspca.h"
#include "jpeg.h"
-MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, "
- "Serge A. Suchkov <Serge.A.S@tochka.ru>");
+MODULE_AUTHOR("Jean-Francois Moine <http://moinejf.free.fr>, Serge A. Suchkov <Serge.A.S@tochka.ru>");
MODULE_DESCRIPTION("GSPCA ZC03xx/VC3xx USB Camera Driver");
MODULE_LICENSE("GPL");
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- drivers/media/usb/gspca/gspca.c | 3 +-- drivers/media/usb/gspca/m5602/m5602_core.c | 11 ++++------- drivers/media/usb/gspca/mr97310a.c | 3 +-- drivers/media/usb/gspca/ov519.c | 3 +-- drivers/media/usb/gspca/pac207.c | 4 ++-- drivers/media/usb/gspca/pac7302.c | 3 +-- drivers/media/usb/gspca/sn9c20x.c | 6 ++---- drivers/media/usb/gspca/sq905.c | 3 +-- drivers/media/usb/gspca/sq905c.c | 4 ++-- drivers/media/usb/gspca/stv06xx/stv06xx.c | 9 +++------ drivers/media/usb/gspca/sunplus.c | 3 +-- drivers/media/usb/gspca/topro.c | 3 +-- drivers/media/usb/gspca/zc3xx.c | 3 +-- 13 files changed, 21 insertions(+), 37 deletions(-)