| Message ID | d1dc3b91af73fbcfcae54fdc80cb38389cc9bacf.1486136893.git.roliveir@synopsys.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
Hi Ramiro, On Fri, Feb 03, 2017 at 06:18:32PM +0000, Ramiro Oliveira wrote: > Create device tree bindings documentation. > > Signed-off-by: Ramiro Oliveira <roliveir@synopsys.com> > Acked-by: Rob Herring <robh@kernel.org> > --- > .../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++ > 1 file changed, 35 insertions(+) > create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt > > diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > new file mode 100644 > index 000000000000..57fd40036c26 > --- /dev/null > +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt > @@ -0,0 +1,35 @@ > +Omnivision OV5647 raw image sensor > +--------------------------------- > + > +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces > +and CCI (I2C compatible) control bus. > + > +Required properties: > + > +- compatible : "ovti,ov5647". > +- reg : I2C slave address of the sensor. > +- clocks : Reference to the xclk clock. > +- clock-names : Should be "xclk". > +- clock-frequency : Frequency of the xclk clock. > + > +The common video interfaces bindings (see video-interfaces.txt) should be > +used to specify link to the image data receiver. The OV5647 device > +node should contain one 'port' child node with an 'endpoint' subnode. > + > +Example: > + > + i2c@2000 { > + ... > + ov: camera@36 { > + compatible = "ovti,ov5647"; > + reg = <0x36>; > + clocks = <&camera_clk>; > + clock-names = "xclk"; > + clock-frequency = <30000000>; For what it's worth, the spec documents the supported frequency range as 6--27 MHz. Most units could still work on frequencies slightly off the range though. > + port { > + camera_1: endpoint { > + remote-endpoint = <&csi1_ep1>; > + }; > + }; > + }; > + };
diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 000000000000..57fd40036c26 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,35 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647". +- reg : I2C slave address of the sensor. +- clocks : Reference to the xclk clock. +- clock-names : Should be "xclk". +- clock-frequency : Frequency of the xclk clock. + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Example: + + i2c@2000 { + ... + ov: camera@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; + clock-names = "xclk"; + clock-frequency = <30000000>; + port { + camera_1: endpoint { + remote-endpoint = <&csi1_ep1>; + }; + }; + }; + };