@@ -813,8 +813,7 @@ static int snd_card_saa7134_capture_open(struct snd_pcm_substream * substream)
int amux, err;
if (!saa7134) {
- pr_err("BUG: saa7134 can't find device struct."
- " Can't proceed with open\n");
+ pr_err("BUG: saa7134 can't find device struct. Can't proceed with open\n");
return -ENODEV;
}
dev = saa7134->dev;
@@ -7341,8 +7341,8 @@ static void hauppauge_eeprom(struct saa7134_dev *dev, u8 *eeprom_data)
case 67659: /* WinTV-HVR1110 (OEM, no IR, hybrid, FM, SVid/Comp, RCA aud) */
break;
default:
- pr_warn("%s: warning: "
- "unknown hauppauge model #%d\n", dev->name, tv.model);
+ pr_warn("%s: warning: unknown hauppauge model #%d\n",
+ dev->name, tv.model);
break;
}
@@ -7920,8 +7920,8 @@ int saa7134_board_init2(struct saa7134_dev *dev)
msg.addr = 0x0b;
msg.len = 1;
if (1 != i2c_transfer(&dev->i2c_adap, &msg, 1)) {
- pr_warn("%s: send wake up byte to pic16C505"
- "(IR chip) failed\n", dev->name);
+ pr_warn("%s: send wake up byte to pic16C505(IR chip) failed\n",
+ dev->name);
} else {
msg.flags = I2C_M_RD;
rc = i2c_transfer(&dev->i2c_adap, &msg, 1);
@@ -66,8 +66,7 @@ MODULE_PARM_DESC(latency,"pci latency timer");
int saa7134_no_overlay=-1;
module_param_named(no_overlay, saa7134_no_overlay, int, 0444);
-MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)"
- " [some VIA/SIS chipsets are known to have problem with overlay]");
+MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
bool saa7134_userptr;
module_param(saa7134_userptr, bool, 0644);
@@ -619,25 +618,25 @@ static irqreturn_t saa7134_irq(int irq, void *dev_id)
print_irqstatus(dev,loop,report,status);
if (report & SAA7134_IRQ_REPORT_PE) {
/* disable all parity error */
- pr_warn("%s/irq: looping -- "
- "clearing PE (parity error!) enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing PE (parity error!) enable bit\n",
+ dev->name);
saa_clearl(SAA7134_IRQ2,SAA7134_IRQ2_INTE_PE);
} else if (report & SAA7134_IRQ_REPORT_GPIO16) {
/* disable gpio16 IRQ */
- pr_warn("%s/irq: looping -- "
- "clearing GPIO16 enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing GPIO16 enable bit\n",
+ dev->name);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_P);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO16_N);
} else if (report & SAA7134_IRQ_REPORT_GPIO18) {
/* disable gpio18 IRQs */
- pr_warn("%s/irq: looping -- "
- "clearing GPIO18 enable bit\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing GPIO18 enable bit\n",
+ dev->name);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_P);
saa_clearl(SAA7134_IRQ2, SAA7134_IRQ2_INTE_GPIO18_N);
} else {
/* disable all irqs */
- pr_warn("%s/irq: looping -- "
- "clearing all enable bits\n",dev->name);
+ pr_warn("%s/irq: looping -- clearing all enable bits\n",
+ dev->name);
saa_writel(SAA7134_IRQ1,0);
saa_writel(SAA7134_IRQ2,0);
}
@@ -1081,18 +1080,14 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
}
#endif
if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) {
- pr_info("%s: quirk: this driver and your "
- "chipset may not work together"
- " in overlay mode.\n",dev->name);
+ pr_info("%s: quirk: this driver and your chipset may not work together in overlay mode.\n",
+ dev->name);
if (!saa7134_no_overlay) {
- pr_info("%s: quirk: overlay "
- "mode will be disabled.\n",
+ pr_info("%s: quirk: overlay mode will be disabled.\n",
dev->name);
saa7134_no_overlay = 1;
} else {
- pr_info("%s: quirk: overlay "
- "mode will be forced. Use this"
- " option at your own risk.\n",
+ pr_info("%s: quirk: overlay mode will be forced. Use this option at your own risk.\n",
dev->name);
}
}
@@ -1106,10 +1101,10 @@ static int saa7134_initdev(struct pci_dev *pci_dev,
/* print pci info */
dev->pci_rev = pci_dev->revision;
pci_read_config_byte(pci_dev, PCI_LATENCY_TIMER, &dev->pci_lat);
- pr_info("%s: found at %s, rev: %d, irq: %d, "
- "latency: %d, mmio: 0x%llx\n", dev->name,
- pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
- dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
+ pr_info("%s: found at %s, rev: %d, irq: %d, latency: %d, mmio: 0x%llx\n",
+ dev->name,
+ pci_name(pci_dev), dev->pci_rev, pci_dev->irq,
+ dev->pci_lat,(unsigned long long)pci_resource_start(pci_dev,0));
pci_set_master(pci_dev);
err = pci_set_dma_mask(pci_dev, DMA_BIT_MASK(32));
if (err) {
@@ -1449,8 +1449,8 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach, fe0->dvb.frontend,
0x60, &dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Medion Quadro, no tda826x "
- "found !\n", __func__);
+ pr_warn("%s: Medion Quadro, no tda826x found !\n",
+ __func__);
goto detach_frontend;
}
if (dev_id != 0x08) {
@@ -1458,8 +1458,8 @@ static int dvb_init(struct saa7134_dev *dev)
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
- pr_warn("%s: Medion Quadro, no ISL6405 "
- "found !\n", __func__);
+ pr_warn("%s: Medion Quadro, no ISL6405 found !\n",
+ __func__);
goto detach_frontend;
}
if (dev_id == 0x07) {
@@ -1629,8 +1629,8 @@ static int dvb_init(struct saa7134_dev *dev)
struct dvb_frontend *fe;
if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60,
&dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) {
- pr_warn("%s: MD7134 DVB-S, no SD1878 "
- "found !\n", __func__);
+ pr_warn("%s: MD7134 DVB-S, no SD1878 found !\n",
+ __func__);
goto detach_frontend;
}
/* we need to open the i2c gate (we know it exists) */
@@ -1638,8 +1638,8 @@ static int dvb_init(struct saa7134_dev *dev)
fe->ops.i2c_gate_ctrl(fe, 1);
if (dvb_attach(isl6405_attach, fe,
&dev->i2c_adap, 0x08, 0, 0) == NULL) {
- pr_warn("%s: MD7134 DVB-S, no ISL6405 "
- "found !\n", __func__);
+ pr_warn("%s: MD7134 DVB-S, no ISL6405 found !\n",
+ __func__);
goto detach_frontend;
}
fe->ops.i2c_gate_ctrl(fe, 0);
@@ -1670,14 +1670,14 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach,
fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Asus Tiger 3in1, no "
- "tda826x found!\n", __func__);
+ pr_warn("%s: Asus Tiger 3in1, no tda826x found!\n",
+ __func__);
goto detach_frontend;
}
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0, 0) == NULL) {
- pr_warn("%s: Asus Tiger 3in1, no lnbp21"
- " found!\n", __func__);
+ pr_warn("%s: Asus Tiger 3in1, no lnbp21 found!\n",
+ __func__);
goto detach_frontend;
}
}
@@ -1695,14 +1695,14 @@ static int dvb_init(struct saa7134_dev *dev)
if (dvb_attach(tda826x_attach,
fe0->dvb.frontend, 0x60,
&dev->i2c_adap, 0) == NULL) {
- pr_warn("%s: Asus My Cinema PS3-100, no "
- "tda826x found!\n", __func__);
+ pr_warn("%s: Asus My Cinema PS3-100, no tda826x found!\n",
+ __func__);
goto detach_frontend;
}
if (dvb_attach(lnbp21_attach, fe0->dvb.frontend,
&dev->i2c_adap, 0, 0) == NULL) {
- pr_warn("%s: Asus My Cinema PS3-100, no lnbp21"
- " found!\n", __func__);
+ pr_warn("%s: Asus My Cinema PS3-100, no lnbp21 found!\n",
+ __func__);
goto detach_frontend;
}
}
@@ -123,8 +123,7 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_flydvb_trio: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_flydvb_trio: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -150,8 +149,8 @@ static int get_key_flydvb_trio(struct IR_i2c *ir, enum rc_type *protocol,
msleep(10);
continue;
}
- ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)"
- "failed %dx\n", attempt);
+ ir_dbg(ir, "send wake up byte to pic16C505 (IR chip)failed %dx\n",
+ attempt);
return -EIO;
}
if (1 != i2c_master_recv(ir->c, &b, 1)) {
@@ -174,8 +173,7 @@ static int get_key_msi_tvanywhere_plus(struct IR_i2c *ir, enum rc_type *protocol
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_msi_tvanywhere_plus: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_msi_tvanywhere_plus: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
@@ -223,8 +221,7 @@ static int get_key_kworld_pc150u(struct IR_i2c *ir, enum rc_type *protocol,
/* <dev> is needed to access GPIO. Used by the saa_readl macro. */
struct saa7134_dev *dev = ir->c->adapter->algo_data;
if (dev == NULL) {
- ir_dbg(ir, "get_key_kworld_pc150u: "
- "ir->c->adapter->algo_data is NULL!\n");
+ ir_dbg(ir, "get_key_kworld_pc150u: ir->c->adapter->algo_data is NULL!\n");
return -EIO;
}
Due to the 80-cols restrictions, and latter due to checkpatch warnings, several strings were broken into multiple lines. This is not considered a good practice anymore, as it makes harder to grep for strings at the source code. As we're right now fixing other drivers due to KERN_CONT, we need to be able to identify what printk strings don't end with a "\n". It is a way easier to detect those if we don't break long lines. So, join those continuation lines. The patch was generated via the script below, and manually adjusted if needed. </script> use Text::Tabs; while (<>) { if ($next ne "") { $c=$_; if ($c =~ /^\s+\"(.*)/) { $c2=$1; $next =~ s/\"\n$//; $n = expand($next); $funpos = index($n, '('); $pos = index($c2, '",'); if ($funpos && $pos > 0) { $s1 = substr $c2, 0, $pos + 2; $s2 = ' ' x ($funpos + 1) . substr $c2, $pos + 2; $s2 =~ s/^\s+//; $s2 = ' ' x ($funpos + 1) . $s2 if ($s2 ne ""); print unexpand("$next$s1\n"); print unexpand("$s2\n") if ($s2 ne ""); } else { print "$next$c2\n"; } $next=""; next; } else { print $next; } $next=""; } else { if (m/\"$/) { if (!m/\\n\"$/) { $next=$_; next; } } } print $_; } </script> Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com> --- drivers/media/pci/saa7134/saa7134-alsa.c | 3 +-- drivers/media/pci/saa7134/saa7134-cards.c | 8 +++---- drivers/media/pci/saa7134/saa7134-core.c | 39 ++++++++++++++----------------- drivers/media/pci/saa7134/saa7134-dvb.c | 32 ++++++++++++------------- drivers/media/pci/saa7134/saa7134-input.c | 13 ++++------- 5 files changed, 43 insertions(+), 52 deletions(-)