new file mode 100644
@@ -0,0 +1,70 @@
+Synopsys DesignWare HDMI RX Decoder
+===================================
+
+This document defines device tree properties for the Synopsys DesignWare HDMI
+RX Decoder (DWC HDMI RX). It doesn't constitute a device tree binding
+specification by itself but is meant to be referenced by platform-specific
+device tree bindings.
+
+When referenced from platform device tree bindings the properties defined in
+this document are defined as follows.
+
+- compatible: Shall be "snps,dw-hdmi-rx".
+
+- reg: Memory mapped base address and length of the DWC HDMI RX registers.
+
+- interrupts: Reference to the DWC HDMI RX interrupt and 5v sense interrupt.
+
+- clocks: Phandle to the config clock block.
+
+- clock-names: Shall be "cfg".
+
+- edid-phandle: phandle to the EDID handler block.
+
+- #address-cells: Shall be 1.
+
+- #size-cells: Shall be 0.
+
+You also have to create a subnode for phy driver. Phy properties are as follows.
+
+- compatible: Shall be "snps,dw-hdmi-phy-e405".
+
+- reg: Shall be JTAG address of phy.
+
+- clocks: Phandle for cfg clock.
+
+- clock-names:Shall be "cfg".
+
+A sample binding is now provided. The compatible string is for a SoC which has
+has a Synopsys DesignWare HDMI RX decoder inside.
+
+Example:
+
+dw_hdmi_soc: dw-hdmi-soc@0 {
+ compatible = "snps,dw-hdmi-soc";
+ reg = <0x11c00 0x1000>; /* EDIDs */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ hdmi-rx@0 {
+ compatible = "snps,dw-hdmi-rx";
+ reg = <0x0 0x10000>;
+ interrupts = <1 2>;
+ edid-phandle = <&dw_hdmi_soc>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ hdmi-phy@fc {
+ compatible = "snps,dw-hdmi-phy-e405";
+ reg = <0xfc>;
+
+ clocks = <&dw_hdmi_refclk>;
+ clock-names = "cfg";
+ };
+ };
+};
Document the bindings for the Synopsys Designware HDMI RX. Signed-off-by: Jose Abreu <joabreu@synopsys.com> Cc: Carlos Palminha <palminha@synopsys.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Mauro Carvalho Chehab <mchehab@kernel.org> Cc: Hans Verkuil <hans.verkuil@cisco.com> Cc: Sylwester Nawrocki <snawrocki@kernel.org> Cc: devicetree@vger.kernel.org Changes from v4: - Use "cfg" instead of "cfg-clk" (Rob) - Change node names (Rob) Changes from v3: - Document the new DT bindings suggested by Sylwester Changes from v2: - Document edid-phandle property --- .../devicetree/bindings/media/snps,dw-hdmi-rx.txt | 70 ++++++++++++++++++++++ 1 file changed, 70 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/snps,dw-hdmi-rx.txt