@@ -229,15 +229,11 @@ static void setup_decoder_defaults(struct au8522_state *state, u8 input_mode)
/* Provide reasonable defaults for picture tuning values */
au8522_writereg(state, AU8522_TVDEC_SHARPNESSREG009H, 0x07);
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH, 0xed);
- state->brightness = 0xed - 128;
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH, 0x79);
- state->contrast = 0x79;
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH, 0x80);
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH, 0x80);
- state->saturation = 0x80;
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH, 0x00);
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH, 0x00);
- state->hue = 0x00;
/* Other decoder registers */
au8522_writereg(state, AU8522_TVDEC_INT_MASK_REG010H, 0x00);
@@ -489,75 +485,32 @@ static void set_audio_input(struct au8522_state *state, int aud_input)
/* ----------------------------------------------------------------------- */
-static int au8522_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
+static int au8522_s_ctrl(struct v4l2_ctrl *ctrl)
{
- struct au8522_state *state = to_state(sd);
+ struct au8522_state *state =
+ container_of(ctrl->handler, struct au8522_state, hdl);
switch (ctrl->id) {
case V4L2_CID_BRIGHTNESS:
- state->brightness = ctrl->value;
au8522_writereg(state, AU8522_TVDEC_BRIGHTNESS_REG00AH,
- ctrl->value - 128);
+ ctrl->val - 128);
break;
case V4L2_CID_CONTRAST:
- state->contrast = ctrl->value;
au8522_writereg(state, AU8522_TVDEC_CONTRAST_REG00BH,
- ctrl->value);
+ ctrl->val);
break;
case V4L2_CID_SATURATION:
- state->saturation = ctrl->value;
au8522_writereg(state, AU8522_TVDEC_SATURATION_CB_REG00CH,
- ctrl->value);
+ ctrl->val);
au8522_writereg(state, AU8522_TVDEC_SATURATION_CR_REG00DH,
- ctrl->value);
+ ctrl->val);
break;
case V4L2_CID_HUE:
- state->hue = ctrl->value;
au8522_writereg(state, AU8522_TVDEC_HUE_H_REG00EH,
- ctrl->value >> 8);
+ ctrl->val >> 8);
au8522_writereg(state, AU8522_TVDEC_HUE_L_REG00FH,
- ctrl->value & 0xFF);
- break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- /* Not yet implemented */
- default:
- return -EINVAL;
- }
-
- return 0;
-}
-
-static int au8522_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
-{
- struct au8522_state *state = to_state(sd);
-
- /* Note that we are using values cached in the state structure instead
- of reading the registers due to issues with i2c reads not working
- properly/consistently yet on the HVR-950q */
-
- switch (ctrl->id) {
- case V4L2_CID_BRIGHTNESS:
- ctrl->value = state->brightness;
- break;
- case V4L2_CID_CONTRAST:
- ctrl->value = state->contrast;
- break;
- case V4L2_CID_SATURATION:
- ctrl->value = state->saturation;
- break;
- case V4L2_CID_HUE:
- ctrl->value = state->hue;
+ ctrl->val & 0xFF);
break;
- case V4L2_CID_AUDIO_VOLUME:
- case V4L2_CID_AUDIO_BASS:
- case V4L2_CID_AUDIO_TREBLE:
- case V4L2_CID_AUDIO_BALANCE:
- case V4L2_CID_AUDIO_MUTE:
- /* Not yet supported */
default:
return -EINVAL;
}
@@ -616,26 +569,6 @@ static int au8522_s_stream(struct v4l2_subdev *sd, int enable)
return 0;
}
-static int au8522_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
-{
- switch (qc->id) {
- case V4L2_CID_CONTRAST:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1,
- AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
- case V4L2_CID_BRIGHTNESS:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 109);
- case V4L2_CID_SATURATION:
- return v4l2_ctrl_query_fill(qc, 0, 255, 1, 128);
- case V4L2_CID_HUE:
- return v4l2_ctrl_query_fill(qc, -32768, 32768, 1, 0);
- default:
- break;
- }
-
- qc->type = 0;
- return -EINVAL;
-}
-
static int au8522_reset(struct v4l2_subdev *sd, u32 val)
{
struct au8522_state *state = to_state(sd);
@@ -712,20 +645,18 @@ static int au8522_g_chip_ident(struct v4l2_subdev *sd,
return v4l2_chip_ident_i2c_client(client, chip, state->id, state->rev);
}
-static int au8522_log_status(struct v4l2_subdev *sd)
-{
- /* FIXME: Add some status info here */
- return 0;
-}
-
/* ----------------------------------------------------------------------- */
static const struct v4l2_subdev_core_ops au8522_core_ops = {
- .log_status = au8522_log_status,
+ .log_status = v4l2_ctrl_subdev_log_status,
+ .g_ext_ctrls = v4l2_subdev_g_ext_ctrls,
+ .try_ext_ctrls = v4l2_subdev_try_ext_ctrls,
+ .s_ext_ctrls = v4l2_subdev_s_ext_ctrls,
+ .g_ctrl = v4l2_subdev_g_ctrl,
+ .s_ctrl = v4l2_subdev_s_ctrl,
+ .queryctrl = v4l2_subdev_queryctrl,
+ .querymenu = v4l2_subdev_querymenu,
.g_chip_ident = au8522_g_chip_ident,
- .g_ctrl = au8522_g_ctrl,
- .s_ctrl = au8522_s_ctrl,
- .queryctrl = au8522_queryctrl,
.reset = au8522_reset,
#ifdef CONFIG_VIDEO_ADV_DEBUG
.g_register = au8522_g_register,
@@ -753,12 +684,17 @@ static const struct v4l2_subdev_ops au8522_ops = {
.video = &au8522_video_ops,
};
+static const struct v4l2_ctrl_ops au8522_ctrl_ops = {
+ .s_ctrl = au8522_s_ctrl,
+};
+
/* ----------------------------------------------------------------------- */
static int au8522_probe(struct i2c_client *client,
const struct i2c_device_id *did)
{
struct au8522_state *state;
+ struct v4l2_ctrl_handler *hdl;
struct v4l2_subdev *sd;
int instance;
struct au8522_config *demod_config;
@@ -799,6 +735,27 @@ static int au8522_probe(struct i2c_client *client,
sd = &state->sd;
v4l2_i2c_subdev_init(sd, client, &au8522_ops);
+ hdl = &state->hdl;
+ v4l2_ctrl_handler_init(hdl, 4);
+ v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+ V4L2_CID_BRIGHTNESS, 0, 255, 1, 109);
+ v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+ V4L2_CID_CONTRAST, 0, 255, 1,
+ AU8522_TVDEC_CONTRAST_REG00BH_CVBS);
+ v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+ V4L2_CID_SATURATION, 0, 255, 1, 128);
+ v4l2_ctrl_new_std(hdl, &au8522_ctrl_ops,
+ V4L2_CID_HUE, -32768, 32767, 1, 0);
+ sd->ctrl_handler = hdl;
+ if (hdl->error) {
+ int err = hdl->error;
+
+ v4l2_ctrl_handler_free(hdl);
+ kfree(demod_config);
+ kfree(state);
+ return err;
+ }
+
state->c = client;
state->vid_input = AU8522_COMPOSITE_CH1;
state->aud_input = AU8522_AUDIO_NONE;
@@ -815,6 +772,7 @@ static int au8522_remove(struct i2c_client *client)
{
struct v4l2_subdev *sd = i2c_get_clientdata(client);
v4l2_device_unregister_subdev(sd);
+ v4l2_ctrl_handler_free(sd->ctrl_handler);
au8522_release_state(to_state(sd));
return 0;
}
@@ -29,6 +29,7 @@
#include <linux/delay.h>
#include <linux/videodev2.h>
#include <media/v4l2-device.h>
+#include <media/v4l2-ctrls.h>
#include <linux/i2c.h>
#include "dvb_frontend.h"
#include "au8522.h"
@@ -65,10 +66,7 @@ struct au8522_state {
int aud_input;
u32 id;
u32 rev;
- u8 brightness;
- u8 contrast;
- u8 saturation;
- s16 hue;
+ struct v4l2_ctrl_handler hdl;
};
/* These are routines shared by both the VSB/QAM demodulator and the analog