[1/2] tm6000 : Add additional GPIO for UT821 during frmware loading

Commit Message

Bee Hock Goh April 25, 2010, 6:50 a.m. UTC

None

Patch

diff --git a/drivers/staging/tm6000/tm6000-cards.c
b/drivers/staging/tm6000/tm6000-cards.c
index f795a3e..ced8fce 100644
--- a/drivers/staging/tm6000/tm6000-cards.c
+++ b/drivers/staging/tm6000/tm6000-cards.c
@@ -349,6 +349,22 @@  int tm6000_tuner_callback(void *ptr, int
component, int command, int arg)
 		case 0:
 			/* newer tuner can faster reset */
 			switch (dev->model) {
+			case TM5600_BOARD_10MOONS_UT821:
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x00);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x00);
+				msleep(10);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       dev->gpio.tuner_reset, 0x01);
+				tm6000_set_reg(dev, REQ_03_SET_GET_MCU_PIN,
+					       0x300, 0x01);
+				break;
 			case TM6010_BOARD_HAUPPAUGE_900H:
 			case TM6010_BOARD_TERRATEC_CINERGY_HYBRID_XE: