From patchwork Fri Jul 30 07:41:23 2021 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: =?utf-8?q?Krzysztof_Ha=C5=82asa?= X-Patchwork-Id: 12410585 Return-Path: X-Spam-Checker-Version: SpamAssassin 3.4.0 (2014-02-07) on aws-us-west-2-korg-lkml-1.web.codeaurora.org X-Spam-Level: X-Spam-Status: No, score=-15.8 required=3.0 tests=BAYES_00,DKIM_SIGNED, DKIM_VALID,DKIM_VALID_AU,HEADER_FROM_DIFFERENT_DOMAINS,INCLUDES_CR_TRAILER, INCLUDES_PATCH,MAILING_LIST_MULTI,SPF_HELO_NONE,SPF_PASS,URIBL_BLOCKED autolearn=ham autolearn_force=no version=3.4.0 Received: from mail.kernel.org (mail.kernel.org [198.145.29.99]) by smtp.lore.kernel.org (Postfix) with ESMTP id 822AFC4338F for ; Fri, 30 Jul 2021 07:41:27 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [23.128.96.18]) by mail.kernel.org (Postfix) with ESMTP id 5ABA660EBB for ; Fri, 30 Jul 2021 07:41:27 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S237767AbhG3Hla (ORCPT ); Fri, 30 Jul 2021 03:41:30 -0400 Received: from ni.piap.pl ([195.187.100.5]:41244 "EHLO ni.piap.pl" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S230337AbhG3Hla (ORCPT ); Fri, 30 Jul 2021 03:41:30 -0400 Received: from t19.piap.pl (OSB1819.piap.pl [10.0.9.19]) by ni.piap.pl (Postfix) with ESMTPSA id 55545C36956D; Fri, 30 Jul 2021 09:41:23 +0200 (CEST) DKIM-Filter: OpenDKIM Filter v2.11.0 ni.piap.pl 55545C36956D DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=piap.pl; s=mail; t=1627630883; bh=UMfgWlQocXWj1I4r+6LLBmFt52bAIQaduq/NW3v3sx4=; h=From:To:Cc:Subject:Date:From; b=kCpq15LENPWdBJb0tOHrHdHnWe0C27PsZ1bW87CJUjwpsYAVNKmf3W1onYgw2nrGX X1Be7Ckqhu5XISxvhVt5pzffWBdFXjiuQ/hIOV3F4YUxkBihwFTcl7RKR3KsOs+/NL /hlwLudnjRsX8CiI1EoPHUYGqzrwBMYaOcSMoKIo= From: Krzysztof =?utf-8?q?Ha=C5=82asa?= To: Mauro Carvalho Chehab Cc: linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, Laurent Pinchart Subject: [PATCH v4] Driver for ON Semi AR0521 camera sensor Date: Fri, 30 Jul 2021 09:41:23 +0200 Message-ID: MIME-Version: 1.0 X-KLMS-Rule-ID: 1 X-KLMS-Message-Action: clean X-KLMS-AntiSpam-Lua-Profiles: 165318 [Jul 30 2021] X-KLMS-AntiSpam-Version: 5.9.20.0 X-KLMS-AntiSpam-Envelope-From: khalasa@piap.pl X-KLMS-AntiSpam-Rate: 0 X-KLMS-AntiSpam-Status: not_detected X-KLMS-AntiSpam-Method: none X-KLMS-AntiSpam-Auth: dkim=pass header.d=piap.pl X-KLMS-AntiSpam-Info: LuaCore: 449 449 5db59deca4a4f5e6ea34a93b13bc730e229092f4, {Tracking_uf_ne_domains}, {Tracking_from_domain_doesnt_match_to}, 127.0.0.199:7.1.2;t19.piap.pl:7.1.1;piap.pl:7.1.1;d41d8cd98f00b204e9800998ecf8427e.com:7.1.1;www.aquantia.com:7.1.1 X-MS-Exchange-Organization-SCL: -1 X-KLMS-AntiSpam-Interceptor-Info: scan successful X-KLMS-AntiPhishing: Clean, bases: 2021/07/30 06:56:00 X-KLMS-AntiVirus: Kaspersky Security for Linux Mail Server, version 8.0.3.30, bases: 2021/07/30 04:15:00 #16998356 X-KLMS-AntiVirus-Status: Clean, skipped Precedence: bulk List-ID: X-Mailing-List: linux-media@vger.kernel.org The driver has been extensively tested in an i.MX6-based system. Signed-off-by: Krzysztof Hałasa --- No changes from v3 here. diff --git a/MAINTAINERS b/MAINTAINERS index a61f4f3b78a9..f92b56487fc6 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1331,6 +1331,12 @@ S: Supported W: http://www.aquantia.com F: drivers/net/ethernet/aquantia/atlantic/aq_ptp* +AR0521 ON SEMICONDUCTOR CAMERA SENSOR DRIVER +M: Krzysztof Hałasa +L: linux-media@vger.kernel.org +S: Maintained +F: drivers/media/i2c/ar0521.c + ARASAN NAND CONTROLLER DRIVER M: Miquel Raynal M: Naga Sureshkumar Relli diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index 588f8eb95984..0c41a3c18671 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -729,6 +729,16 @@ config VIDEO_APTINA_PLL config VIDEO_CCS_PLL tristate +config VIDEO_AR0521 + tristate "ON Semiconductor AR0521 sensor support" + depends on I2C && VIDEO_V4L2 + help + This is a Video4Linux2 sensor driver for the ON Semiconductor + AR0521 camera. + + To compile this driver as a module, choose M here: the + module will be called ar0521. + config VIDEO_HI556 tristate "Hynix Hi-556 sensor support" depends on I2C && VIDEO_V4L2 diff --git a/drivers/media/i2c/Makefile b/drivers/media/i2c/Makefile index 1168fa6b84ed..3351deeb741b 100644 --- a/drivers/media/i2c/Makefile +++ b/drivers/media/i2c/Makefile @@ -8,6 +8,7 @@ obj-$(CONFIG_VIDEO_CX25840) += cx25840/ obj-$(CONFIG_VIDEO_M5MOLS) += m5mols/ obj-$(CONFIG_VIDEO_APTINA_PLL) += aptina-pll.o +obj-$(CONFIG_VIDEO_AR0521) += ar0521.o obj-$(CONFIG_VIDEO_TVAUDIO) += tvaudio.o obj-$(CONFIG_VIDEO_TDA7432) += tda7432.o obj-$(CONFIG_VIDEO_SAA6588) += saa6588.o diff --git a/drivers/media/i2c/ar0521.c b/drivers/media/i2c/ar0521.c new file mode 100644 index 000000000000..0ab10bf2f99f --- /dev/null +++ b/drivers/media/i2c/ar0521.c @@ -0,0 +1,1065 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Copyright (C) 2021 Sieć Badawcza Łukasiewicz - Przemysłowy Instytut Automatyki i Pomiarów PIAP + * Written by Krzysztof Hałasa + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +// External clock (extclk) frequencies +#define AR0521_EXTCLK_RATE (27 * 1000 * 1000) +#define AR0521_EXTCLK_MIN (10 * 1000 * 1000) +#define AR0521_EXTCLK_MAX (48 * 1000 * 1000) + +// PLL and PLL2 +#define AR0521_PLL_MIN (320 * 1000 * 1000) +#define AR0521_PLL_MAX (1280 * 1000 * 1000) + +// effective pixel clocks, the registers may be DDR +#define AR0521_PIXEL_CLOCK_MIN (168 * 1000 * 1000) +#define AR0521_PIXEL_CLOCK_MAX (414 * 1000 * 1000) + +#define AR0521_WIDTH_MIN 8u +#define AR0521_WIDTH_MAX 2608u +#define AR0521_HEIGHT_MIN 8u +#define AR0521_HEIGHT_MAX 1958u + +#define AR0521_WIDTH_BLANKING_MIN 572u +#define AR0521_HEIGHT_BLANKING_MIN 28u // must be even +#define AR0521_TOTAL_WIDTH_MIN 2968u + +// AR0521 registers +#define AR0521_REG_VT_PIX_CLK_DIV 0x0300 +#define AR0521_REG_FRAME_LENGTH_LINES 0x0340 + +#define AR0521_REG_CHIP_ID 0x3000 +#define AR0521_REG_COARSE_INTEGRATION_TIME 0x3012 +#define AR0521_REG_ROW_SPEED 0x3016 +#define AR0521_REG_EXTRA_DELAY 0x3018 +#define AR0521_REG_RESET 0x301A +#define AR0521_REG_RESET_DEFAULTS 0x0238 +#define AR0521_REG_RESET_GROUP_PARAM_HOLD 0x8000 +#define AR0521_REG_RESET_STREAM BIT(2) +#define AR0521_REG_RESET_RESTART BIT(1) +#define AR0521_REG_RESET_INIT BIT(0) + +#define AR0521_REG_GREEN1_GAIN 0x3056 +#define AR0521_REG_BLUE_GAIN 0x3058 +#define AR0521_REG_RED_GAIN 0x305A +#define AR0521_REG_GREEN2_GAIN 0x305C +#define AR0521_REG_GLOBAL_GAIN 0x305E + +#define AR0521_REG_HISPI_TEST_MODE 0x3066 +#define AR0521_REG_HISPI_TEST_MODE_LP11 0x0004 + +#define AR0521_REG_TEST_PATTERN_MODE 0x3070 + +#define AR0521_REG_SERIAL_FORMAT 0x31AE +#define AR0521_REG_SERIAL_FORMAT_MIPI 0x0200 + +#define AR0521_REG_HISPI_CONTROL_STATUS 0x31C6 +#define AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE 0x80 + +#define be cpu_to_be16 + +// regulator supplies +static const char * const ar0521_supply_names[] = { + "vdd_io", // I/O (1.8V) supply + "vdd", // Core, PLL and MIPI (1.2V) supply + "vaa", // Analog (2.7V) supply +}; + +#define AR0521_NUM_SUPPLIES ARRAY_SIZE(ar0521_supply_names) + +struct ar0521_ctrls { + struct v4l2_ctrl_handler handler; + struct v4l2_ctrl *exposure; + struct v4l2_ctrl *gain, *red_balance, *blue_balance; + struct v4l2_ctrl *test_pattern; + struct v4l2_ctrl *hblank, *vblank, *pixrate; +}; + +struct ar0521_dev { + struct i2c_client *i2c_client; + struct v4l2_subdev sd; + struct media_pad pad; + struct v4l2_fwnode_endpoint ep; + struct clk *extclk; + u32 extclk_freq; + + struct regulator *supplies[AR0521_NUM_SUPPLIES]; + struct gpio_desc *reset_gpio; + + // lock to protect all members below + struct mutex lock; + + struct v4l2_mbus_framefmt fmt; + struct v4l2_fract frame_interval, current_frame_interval; + struct ar0521_ctrls ctrls; + u32 pix_clk; + unsigned int power_count; + u16 total_width, total_height, pll_pre, pll_mult, pll_pre2, pll_mult2, extra_delay; + bool streaming; +}; + +static int debug; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Debug level 0-3"); + +static inline struct ar0521_dev *to_ar0521_dev(struct v4l2_subdev *sd) +{ + return container_of(sd, struct ar0521_dev, sd); +} + +static inline struct v4l2_subdev *ctrl_to_sd(struct v4l2_ctrl *ctrl) +{ + return &container_of(ctrl->handler, struct ar0521_dev, ctrls.handler)->sd; +} + +static inline unsigned int lanes(struct ar0521_dev *sensor) +{ + return sensor->ep.bus.mipi_csi2.num_data_lanes; +} + +static const char *mhz(u32 value) +{ + static char buff[32]; + + if (value % 1000) + sprintf(buff, "%u.%06u", value / (1000 * 1000), value % (1000 * 1000)); + else if (value % (1000 * 1000)) + sprintf(buff, "%u.%03u", value / (1000 * 1000), (value / 1000) % 1000); + else + sprintf(buff, "%u", value / (1000 * 1000)); + return buff; +} + +static u32 div64_round(u64 v, u32 d) +{ + return div_u64(v + (d >> 1), d); +} + +static u32 div64_round_up(u64 v, u32 d) +{ + return div_u64(v + d - 1, d); +} + +#define HEX_DUMP_WORDS 8 +static void dump_i2c(struct ar0521_dev *sensor, const __be16 *data, unsigned int count) +{ + char buffer[5 /* " XXXX" */ * HEX_DUMP_WORDS + 1 /* NUL */]; + u16 addr; + int i; + + addr = be16_to_cpu(*data++); + count--; + while (count) { + for (i = 0; i < HEX_DUMP_WORDS; i++) { + sprintf(buffer + 5 * i, " %04X", be16_to_cpu(*data++)); + addr += 2; + if (!--count) + break; + } + v4l2_dbg(3, debug, &sensor->sd, "WR %04X:%s\n", addr, buffer); + } +} + +// data must be BE16, the first value is the register address +static int ar0521_write_regs(struct ar0521_dev *sensor, const __be16 *data, unsigned int count) +{ + struct i2c_client *client = sensor->i2c_client; + struct i2c_msg msg; + int ret; + + if (!sensor->power_count) + return 0; + + if (debug >= 3) + dump_i2c(sensor, data, count); + + msg.addr = client->addr; + msg.flags = client->flags; + msg.buf = (u8 *)data; + msg.len = count * sizeof(*data); + + ret = i2c_transfer(client->adapter, &msg, 1); + if (ret < 0) { + v4l2_err(&sensor->sd, "%s: I2C write error\n", __func__); + return ret; + } + + return 0; +} + +static int ar0521_write_reg(struct ar0521_dev *sensor, u16 reg, u16 val) +{ + __be16 buf[2] = {be(reg), be(val)}; + + return ar0521_write_regs(sensor, buf, 2); +} + +static int ar0521_set_geometry(struct ar0521_dev *sensor) +{ + // all dimensions are unsigned 12-bit integers + u16 x = (AR0521_WIDTH_MAX - sensor->fmt.width) / 2; + u16 y = ((AR0521_HEIGHT_MAX - sensor->fmt.height) / 2) & ~1; + __be16 regs[] = { + be(AR0521_REG_FRAME_LENGTH_LINES), + be(sensor->total_height), + be(sensor->total_width), + be(x), + be(y), + be(x + sensor->fmt.width - 1), + be(y + sensor->fmt.height - 1), + be(sensor->fmt.width), + be(sensor->fmt.height) + }; + + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__); + + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs)); +} + +static int ar0521_set_gains(struct ar0521_dev *sensor) +{ + int green = sensor->ctrls.gain->val; + int red = max(green + sensor->ctrls.red_balance->val, 0); + int blue = max(green + sensor->ctrls.blue_balance->val, 0); + unsigned int gain = min(red, min(green, blue)); + unsigned int analog = min(gain, 64u); // range is 0 - 127 + __be16 regs[5]; + + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__); + + red = min(red - analog + 64, 511u); + green = min(green - analog + 64, 511u); + blue = min(blue - analog + 64, 511u); + regs[0] = be(AR0521_REG_GREEN1_GAIN); + regs[1] = be(green << 7 | analog); + regs[2] = be(blue << 7 | analog); + regs[3] = be(red << 7 | analog); + regs[4] = be(green << 7 | analog); + + return ar0521_write_regs(sensor, regs, ARRAY_SIZE(regs)); +} + +static int ar0521_write_mode(struct ar0521_dev *sensor) +{ + __be16 pll_regs[] = { + be(AR0521_REG_VT_PIX_CLK_DIV), + /* 0x300 */ be(4), // vt_pix_clk_div = number of bits / 2 + /* 0x302 */ be(1), // vt_sys_clk_div + /* 0x304 */ be((sensor->pll_pre2 << 8) | sensor->pll_pre), + /* 0x306 */ be((sensor->pll_mult2 << 8) | sensor->pll_mult), + /* 0x308 */ be(8), // op_pix_clk_div = 2 * vt_pix_clk_div + /* 0x30A */ be(1) // op_sys_clk_div + }; + u32 num = sensor->current_frame_interval.numerator; + u32 denom = sensor->current_frame_interval.denominator; + int ret; + + v4l2_dbg(2, debug, &sensor->sd, "%s()\n", __func__); + + // stop streaming for just a moment + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS); + if (ret) + return ret; + + ret = ar0521_set_geometry(sensor); + if (ret) + return ret; + + ret = ar0521_write_regs(sensor, pll_regs, ARRAY_SIZE(pll_regs)); + if (ret) + return ret; + + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, sensor->ctrls.exposure->val); + if (ret) + return ret; + + ret = ar0521_write_reg(sensor, AR0521_REG_EXTRA_DELAY, sensor->extra_delay); + if (ret) + return ret; + + ret = ar0521_write_reg(sensor, AR0521_REG_RESET, AR0521_REG_RESET_DEFAULTS | AR0521_REG_RESET_STREAM); + if (ret) + return ret; + + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, sensor->ctrls.test_pattern->val); + if (ret) + return ret; + + dev_info(&sensor->i2c_client->dev, + "AR0521: %ux%u, total %ux%u, pixel clock %s MHz, %u (%u/%u) FPS\n", + sensor->fmt.width, sensor->fmt.height, sensor->total_width, sensor->total_height, + mhz(sensor->pix_clk), (num + denom / 2) / denom, num, denom); + return 0; +} + +static int ar0521_set_stream(struct ar0521_dev *sensor, bool on) +{ + int ret; + + v4l2_dbg(2, debug, &sensor->sd, "%s(%u)\n", __func__, on); + + ret = ar0521_write_mode(sensor); + if (ret) + return ret; + + if (on) { + ret = ar0521_set_gains(sensor); + if (ret) + return ret; + + // normal output on clock and data lanes + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, 0); + if (ret) + return ret; + } else { + // reset gain, the sensor may produce all white pixels without this + ret = ar0521_write_reg(sensor, AR0521_REG_GLOBAL_GAIN, 0x2000); + if (ret) + return ret; + + // set LP-11 on clock and data lanes + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_CONTROL_STATUS, + AR0521_REG_HISPI_CONTROL_STATUS_FRAMER_TEST_MODE_ENABLE); + if (ret) + return ret; + } + + // start streaming (possibly with LP-11 on all lines) + return ar0521_write_reg(sensor, AR0521_REG_RESET, + AR0521_REG_RESET_DEFAULTS | + AR0521_REG_RESET_RESTART | + AR0521_REG_RESET_STREAM); +} + +static u32 calc_pll(struct ar0521_dev *sensor, int num, u32 freq, u16 *pre_ptr, u16 *mult_ptr) +{ + u16 pre = 1, mult = 1, new_pre; + u32 pll = AR0521_PLL_MAX + 1; + + for (new_pre = 1; new_pre < 64; new_pre++) { + u32 new_pll; + u32 new_mult = div64_round_up((u64)freq * new_pre, sensor->extclk_freq); + + if (new_mult < 32) + continue; // minimum value + if (new_mult > 254) + break; // maximum, larger pre won't work either + if (sensor->extclk_freq * (u64)new_mult < AR0521_PLL_MIN * new_pre) + continue; + if (sensor->extclk_freq * (u64)new_mult > AR0521_PLL_MAX * new_pre) + break; // larger pre won't work either + new_pll = div64_round_up(sensor->extclk_freq * (u64)new_mult, new_pre); + if (new_pll < pll) { + pll = new_pll; + pre = new_pre; + mult = new_mult; + } + } + + pll = div64_round(sensor->extclk_freq * (u64)mult, pre); + *pre_ptr = pre; + *mult_ptr = mult; + return pll; +} + +static void ar0521_adj_fmt(struct v4l2_mbus_framefmt *fmt) +{ + fmt->width = clamp(ALIGN(fmt->width, 4), AR0521_WIDTH_MIN, AR0521_WIDTH_MAX); + fmt->height = clamp(ALIGN(fmt->height, 4), AR0521_HEIGHT_MIN, AR0521_HEIGHT_MAX); + fmt->code = MEDIA_BUS_FMT_SGRBG8_1X8; + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT; + fmt->quantization = V4L2_QUANTIZATION_FULL_RANGE; + fmt->xfer_func = V4L2_XFER_FUNC_DEFAULT; +} + +#define DIV 4 +static void ar0521_calc_mode(struct ar0521_dev *sensor) +{ + unsigned int speed_mod = 4 / lanes(sensor); // 1 with 4 DDR lanes + u64 pix_clk; // for calculations + u32 pixels, num, denom, new_total_height, new_pixels; + u16 total_width, total_height; + + total_width = max(sensor->fmt.width + AR0521_WIDTH_BLANKING_MIN, AR0521_TOTAL_WIDTH_MIN); + total_height = sensor->fmt.height + AR0521_HEIGHT_BLANKING_MIN; + + pixels = total_width * total_height; + num = sensor->frame_interval.numerator; + denom = sensor->frame_interval.denominator; + + // calculate approximate pixel clock first + pix_clk = div64_round_up(pixels * (u64)num, denom); + if (pix_clk > AR0521_PIXEL_CLOCK_MAX) { + u32 cnt; + // have to recalculate FPS + num = pix_clk = AR0521_PIXEL_CLOCK_MAX; + denom = pixels; + // try to reduce the numbers a bit + for (cnt = 2; cnt * cnt < denom; cnt++) + while (num % cnt == 0 && denom % cnt == 0) { + num /= cnt; + denom /= cnt; + } + } else if (pix_clk < AR0521_PIXEL_CLOCK_MIN) + // we will compensate with total_height and extra_delay + pix_clk = AR0521_PIXEL_CLOCK_MIN; + + sensor->current_frame_interval.numerator = num; + sensor->current_frame_interval.denominator = denom; + + // PLL1 drives pixel clock - dual rate + pix_clk = calc_pll(sensor, 1, pix_clk * (DIV / 2), &sensor->pll_pre, &sensor->pll_mult); + pix_clk = div64_round(pix_clk, (DIV / 2)); + calc_pll(sensor, 2, pix_clk * (DIV / 2) * speed_mod, &sensor->pll_pre2, &sensor->pll_mult2); + + // let's see if we can do better + new_total_height = (div64_round((u64)pix_clk * denom, num) / total_width) & ~1; // must be even + if (new_total_height > total_height) { + total_height = new_total_height; + pixels = total_width * total_height; + } + + // maybe there is still room for improvement + new_pixels = div64_round(pix_clk * denom, num); + sensor->extra_delay = 0; + if (new_pixels > pixels) + sensor->extra_delay = new_pixels - pixels; + + sensor->pix_clk = pix_clk; + sensor->total_width = total_width; + sensor->total_height = total_height; +} + +static int ar0521_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + struct v4l2_mbus_framefmt *fmt; + + if (format->pad) + return -EINVAL; + + v4l2_dbg(1, debug, &sensor->sd, "%s(%u)\n", __func__, format->which); + + mutex_lock(&sensor->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) + fmt = v4l2_subdev_get_try_format(&sensor->sd, sd_state, 0 /* pad */); + else + fmt = &sensor->fmt; + + format->format = *fmt; + + mutex_unlock(&sensor->lock); + return 0; +} + +static int ar0521_set_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_format *format) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + int ret = 0; + + if (format->pad) + return -EINVAL; + + v4l2_dbg(1, debug, &sensor->sd, "%s(%u)\n", __func__, format->which); + + ar0521_adj_fmt(&format->format); + + mutex_lock(&sensor->lock); + + if (format->which == V4L2_SUBDEV_FORMAT_TRY) { + struct v4l2_mbus_framefmt *fmt; + + fmt = v4l2_subdev_get_try_format(sd, sd_state, 0 /* pad */); + *fmt = format->format; + } else { + sensor->fmt = format->format; + ar0521_calc_mode(sensor); + ret = ar0521_write_mode(sensor); + } + + mutex_unlock(&sensor->lock); + return ret; +} + +static int ar0521_s_ctrl(struct v4l2_ctrl *ctrl) +{ + struct v4l2_subdev *sd = ctrl_to_sd(ctrl); + struct ar0521_dev *sensor = to_ar0521_dev(sd); + int ret; + + // v4l2_ctrl_lock() locks our own mutex + + v4l2_dbg(1, debug, &sensor->sd, "%s(0x%X)\n", __func__, ctrl->id); + + switch (ctrl->id) { + case V4L2_CID_HBLANK: + case V4L2_CID_VBLANK: + sensor->total_width = sensor->fmt.width + sensor->ctrls.hblank->val; + sensor->total_height = sensor->fmt.width + sensor->ctrls.vblank->val; + ret = ar0521_set_geometry(sensor); + break; + case V4L2_CID_GAIN: + case V4L2_CID_RED_BALANCE: + case V4L2_CID_BLUE_BALANCE: + ret = ar0521_set_gains(sensor); + break; + case V4L2_CID_EXPOSURE: + ret = ar0521_write_reg(sensor, AR0521_REG_COARSE_INTEGRATION_TIME, ctrl->val); + break; + case V4L2_CID_TEST_PATTERN: + ret = ar0521_write_reg(sensor, AR0521_REG_TEST_PATTERN_MODE, ctrl->val); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static const struct v4l2_ctrl_ops ar0521_ctrl_ops = { + .s_ctrl = ar0521_s_ctrl, +}; + +static const char * const test_pattern_menu[] = { + "Disabled", + "Solid color", + "Color bars", + "Faded color bars" +}; + +static int ar0521_init_controls(struct ar0521_dev *sensor) +{ + const struct v4l2_ctrl_ops *ops = &ar0521_ctrl_ops; + struct ar0521_ctrls *ctrls = &sensor->ctrls; + struct v4l2_ctrl_handler *hdl = &ctrls->handler; + int ret; + + v4l2_ctrl_handler_init(hdl, 32); + + // we can use our own mutex for the ctrl lock + hdl->lock = &sensor->lock; + + // manual gain + ctrls->gain = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_GAIN, 0, 511, 1, 0); + ctrls->red_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_RED_BALANCE, -512, 511, 1, 0); + ctrls->blue_balance = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_BLUE_BALANCE, -512, 511, 1, 0); + + // alternate for frame interval + ctrls->hblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_HBLANK, AR0521_WIDTH_BLANKING_MIN, 4094, 1, AR0521_WIDTH_BLANKING_MIN); + ctrls->vblank = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_VBLANK, AR0521_HEIGHT_BLANKING_MIN, 4094, 2, AR0521_HEIGHT_BLANKING_MIN); + // Read-only + ctrls->pixrate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE, AR0521_PIXEL_CLOCK_MIN, AR0521_PIXEL_CLOCK_MAX, 1, AR0521_PIXEL_CLOCK_MIN); + + // manual exposure time + ctrls->exposure = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_EXPOSURE, 0, 65535, 1, 0); + + ctrls->test_pattern = v4l2_ctrl_new_std_menu_items(hdl, ops, V4L2_CID_TEST_PATTERN, + ARRAY_SIZE(test_pattern_menu) - 1, + 0, 0, test_pattern_menu); + + if (hdl->error) { + ret = hdl->error; + goto free_ctrls; + } + + sensor->sd.ctrl_handler = hdl; + return 0; + +free_ctrls: + v4l2_ctrl_handler_free(hdl); + return ret; +} + +static const struct initial_reg { + u16 addr, value; +} initial_regs[] = { + // corrections_recommended_bayer + {0x3042, 0x0004}, // RNC:enable b/w rnc mode + {0x3044, 0x4580}, // RNC:enable row noise correction + {0x30EE, 0x1136}, // RNC:rnc scaling factor-->initial recommended setting + {0x3120, 0x0001}, // recommended setting for dither + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 7max,7min filtered out of every 46 + {0x30D2, 0x0000}, // CRM/CC: enable crm on Visible and CC rows + {0x30D4, 0x0000}, // CC: CC enabled with 16 samples per column + {0x30D6, 0x2FFF}, // CC: bw mode enabled/12 bit data resolution/bw mode + {0x30DA, 0x0FFF}, // CC: column correction clip level 2 is 0 + {0x30DC, 0x0FFF}, // CC: column correction clip level 3 is 0 + {0x30DE, 0x0000}, // CC: Group FPN correction + {0x31E0, 0x0781}, // Fuse/2DDC: enable 2ddc + {0x3180, 0x9434}, // FDOC:fdoc settings with fdoc every frame turned of + {0x3172, 0x0206}, // txlo clk divider options + {0x3F00, 0x0017}, // BM_T0 + {0x3F02, 0x02DD}, // BM_T1 + {0x3F04, 0x0020}, // if Ana_gain less than 2, use noise_floor0, multipl + {0x3F06, 0x0040}, // if Ana_gain between 4 and 7, use noise_floor2 and + {0x3F08, 0x0070}, // if Ana_gain between 4 and 7, use noise_floor2 and + {0x3F0A, 0x0101}, // Define noise_floor0(low address) and noise_floor1 + {0x3F0C, 0x0302}, // Define noise_floor2 and noise_floor3 + {0x3F1E, 0x0022}, + {0x3F1A, 0x01FF}, // cross factor 2 + {0x3F14, 0x0505}, // single k factor 2 + {0x3F44, 0x0707}, // couple k factor 2 + {0x3F18, 0x01FF}, // cross factor 1 + {0x3F12, 0x0505}, // single k factor 1 + {0x3F42, 0x1511}, // couple k factor 1 + {0x3F16, 0x01FF}, // cross factor 0 + {0x3F10, 0x0505}, // single k factor 0 + {0x3F40, 0x1511}, // couple k factor 0 + + // analog_setup_recommended_12bit + {0x3EB6, 0x004C}, // ECL + {0x3EBA, 0xAAAA}, + {0x3EBC, 0x0086}, // Bias currents for FSC/ECL + {0x3EC0, 0x1E00}, // SFbin/SH mode settings + {0x3EC2, 0x100B}, // CLK divider for ramp for 12 bit 400MHz mode only + {0x3EC4, 0x3300}, // FSC clamps for HDR mode and adc comp power down co + {0x3EC6, 0xEA44}, // VLN and clk gating controls + {0x3EC8, 0x6F6F}, // Txl0 and Txlo1 settings for normal mode + {0x3ECA, 0x2F4A}, // CDAC/Txlo2/RSTGHI/RSTGLO settings + {0x3ECC, 0x0506}, // RSTDHI/RSTDLO/CDAC/TXHI settings + {0x3ECE, 0x203B}, // Ramp buffer settings and Booster enable (bits 0-5) + {0x3ED0, 0x13F0}, // TXLO from atest/sf bin settings + {0x3ED2, 0x9A3D}, // Booster settings for reference rows/columns + {0x3ED4, 0x862F}, // TXLO open loop/row driver settings + {0x3ED6, 0x4081}, // Txlatch fr cfpn rows/vln bias + {0x3ED8, 0x4003}, // Ramp step setting for 12 bit 400 Mhz mode + {0x3EDA, 0x9A80}, // ramp offset for T1/normal and rst under range + {0x3EDC, 0xC000}, // over range for rst and under range for sig + {0x3EDE, 0xC103}, // over range for sig and col dec clk settings + {0x3426, 0x1600}, // ADC offset distribution pulse + {0x342A, 0x0038}, // pulse_config + {0x3F3E, 0x0001}, // Switch ADC from 10 bit to 12 bit mode + {0x341A, 0x6051}, + {0x3420, 0x6051}, + + // analog_setup_recommended_10bit + {0x3EC2, 0x100A}, // CLK divider for ramp for 10 bit 400MH + {0x3ED8, 0x8003}, // Ramp step setting for 10 bit 400 Mhz + {0x341A, 0x4735}, // Samp&Hold pulse in ADC + {0x3420, 0x4735}, // Samp&Hold pulse in ADC + {0x3426, 0x8A1A}, // ADC offset distribution pulse + {0x342A, 0x0018}, // pulse_config + {0x3ED2, 0xA53D}, // Ramp offset + {0x3EDA, 0xA580}, // Ramp Offset + {0x3EBA, 0xAAAD}, + {0x3EB6, 0x004C}, + {0x3F3E, 0x0000}, // Switch ADC from 12 bit to 10 bit mode + + // new RNC 10bit + {0x30EE, 0x1136}, // RNC:rnc scaling factor=*54/64 (32/38*64=53.9) + {0x3F2C, 0x442E}, // GTH_THRES_RTN: 4max,4min filtered out of every 46 samples and + // for 10bit mode + {0x301E, 0x00AA}, // PEDESTAL+2 :+2 is a workaround for 10bit mode +0.5 Rounding + {0x3120, 0x0005}, // p1 dither enabled for 10bit mode + + {0x0112, 0x0808}, // 8-bit/8-bit mode + {0x31BC, 0x068C}, // don't use continuous clock mode while shut down + {0x30FA, 0xFD00}, // GPIO0 = flash, GPIO1 = shutter + {0x31B0, 0x008B}, // frame_preamble - FIXME check WRT lanes# + {0x31B2, 0x0050}, // line_preamble - FIXME check WRT lanes# +}; + +static __be16 pixel_timing_recommended[] = { + be(0x3D00), // first register address + /* 3D00 */ be(0x043E), be(0x4760), be(0xFFFF), be(0xFFFF), be(0x8000), be(0x0510), be(0xAF08), be(0x0252), + /* 3D10 */ be(0x486F), be(0x5D5D), be(0x8056), be(0x8313), be(0x0087), be(0x6A48), be(0x6982), be(0x0280), + /* 3D20 */ be(0x8359), be(0x8D02), be(0x8020), be(0x4882), be(0x4269), be(0x6A95), be(0x5988), be(0x5A83), + /* 3D30 */ be(0x5885), be(0x6280), be(0x6289), be(0x6097), be(0x5782), be(0x605C), be(0xBF18), be(0x0961), + /* 3D40 */ be(0x5080), be(0x2090), be(0x4390), be(0x4382), be(0x5F8A), be(0x5D5D), be(0x9C63), be(0x8063), + /* 3D50 */ be(0xA960), be(0x9757), be(0x8260), be(0x5CFF), be(0xBF10), be(0x1681), be(0x0802), be(0x8000), + /* 3D60 */ be(0x141C), be(0x6000), be(0x6022), be(0x4D80), be(0x5C97), be(0x6A69), be(0xAC6F), be(0x4645), + /* 3D70 */ be(0x4400), be(0x0513), be(0x8069), be(0x6AC6), be(0x5F95), be(0x5F70), be(0x8040), be(0x4A81), + /* 3D80 */ be(0x0300), be(0xE703), be(0x0088), be(0x4A83), be(0x40FF), be(0xFFFF), be(0xFD70), be(0x8040), + /* 3D90 */ be(0x4A85), be(0x4FA8), be(0x4F8C), be(0x0070), be(0xBE47), be(0x8847), be(0xBC78), be(0x6B89), + /* 3DA0 */ be(0x6A80), be(0x6986), be(0x6B8E), be(0x6B80), be(0x6980), be(0x6A88), be(0x7C9F), be(0x866B), + /* 3DB0 */ be(0x8765), be(0x46FF), be(0xE365), be(0xA679), be(0x4A40), be(0x4580), be(0x44BC), be(0x7000), + /* 3DC0 */ be(0x8040), be(0x0802), be(0x10EF), be(0x0104), be(0x3860), be(0x5D5D), be(0x5682), be(0x1300), + /* 3DD0 */ be(0x8648), be(0x8202), be(0x8082), be(0x598A), be(0x0280), be(0x2048), be(0x3060), be(0x8042), + /* 3DE0 */ be(0x9259), be(0x865A), be(0x8258), be(0x8562), be(0x8062), be(0x8560), be(0x9257), be(0x8221), + /* 3DF0 */ be(0x10FF), be(0xB757), be(0x9361), be(0x1019), be(0x8020), be(0x9043), be(0x8E43), be(0x845F), + /* 3E00 */ be(0x835D), be(0x805D), be(0x8163), be(0x8063), be(0xA060), be(0x9157), be(0x8260), be(0x5CFF), + /* 3E10 */ be(0xFFFF), be(0xFFE5), be(0x1016), be(0x2048), be(0x0802), be(0x1C60), be(0x0014), be(0x0060), + /* 3E20 */ be(0x2205), be(0x8120), be(0x908F), be(0x6A80), be(0x6982), be(0x5F9F), be(0x6F46), be(0x4544), + /* 3E30 */ be(0x0005), be(0x8013), be(0x8069), be(0x6A80), be(0x7000), be(0x0000), be(0x0000), be(0x0000), + /* 3E40 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3E50 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3E60 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3E70 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3E80 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3E90 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3EA0 */ be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), be(0x0000), + /* 3EB0 */ be(0x0000), be(0x0000), be(0x0000)}; + +static void ar0521_power_off(struct ar0521_dev *sensor) +{ + int i; + + v4l2_dbg(1, debug, &sensor->sd, "%s()\n", __func__); + clk_disable_unprepare(sensor->extclk); + + if (sensor->reset_gpio) + gpiod_set_value(sensor->reset_gpio, 1); // assert RESET signal + + for (i = AR0521_NUM_SUPPLIES - 1; i >= 0; i--) { + if (sensor->supplies[i]) + regulator_disable(sensor->supplies[i]); + } +} + +static int ar0521_power_on(struct ar0521_dev *sensor) +{ + int i, ret; + unsigned int nlanes = lanes(sensor); + + v4l2_dbg(1, debug, &sensor->sd, "%s()\n", __func__); + for (i = 0; i < AR0521_NUM_SUPPLIES; i++) + if (sensor->supplies[i]) { + ret = regulator_enable(sensor->supplies[i]); + if (ret < 0) + goto off; + + usleep_range(1000, 1500); // min 1 ms + } + + ret = clk_prepare_enable(sensor->extclk); + if (ret < 0) { + v4l2_err(&sensor->sd, "error enabling sensor clock\n"); + goto off; + } + usleep_range(1000, 1500); // min 1 ms + + if (sensor->reset_gpio) + gpiod_set_value(sensor->reset_gpio, 0); // deassert RESET signal + usleep_range(4500, 5000); // min 45000 clocks + + for (i = 0; i < ARRAY_SIZE(initial_regs); i++) + if (ar0521_write_reg(sensor, initial_regs[i].addr, initial_regs[i].value)) + goto off; + + ret = ar0521_write_regs(sensor, pixel_timing_recommended, ARRAY_SIZE(pixel_timing_recommended)); + if (ret) + goto off; + + ret = ar0521_write_reg(sensor, AR0521_REG_SERIAL_FORMAT, AR0521_REG_SERIAL_FORMAT_MIPI | nlanes); + if (ret) + goto off; + + // set MIPI test mode - disabled for now + ret = ar0521_write_reg(sensor, AR0521_REG_HISPI_TEST_MODE, + ((0x40 << nlanes) - 0x40) | AR0521_REG_HISPI_TEST_MODE_LP11); + if (ret) + goto off; + + ret = ar0521_write_reg(sensor, AR0521_REG_ROW_SPEED, 0x110 | 4 / nlanes); + if (ret) + goto off; + + ar0521_calc_mode(sensor); + + ret = ar0521_set_stream(sensor, 0); + if (ret) + goto off; + + return 0; +off: + ar0521_power_off(sensor); + return ret; +} + +static int ar0521_s_power(struct v4l2_subdev *sd, int on) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + + v4l2_dbg(1, debug, &sensor->sd, "%s(%u, %s)\n", __func__, sensor->power_count, on ? "on" : "off"); + + if (on) { + if (!sensor->power_count++) { + int ret = ar0521_power_on(sensor); + + if (ret) { + sensor->power_count = 0; // undo + return ret; + } + } + } else if (!--sensor->power_count) + ar0521_power_off(sensor); + + return 0; +} + +static int ar0521_enum_mbus_code(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + + if (code->pad || code->index) + return -EINVAL; + + code->code = sensor->fmt.code; + v4l2_dbg(1, debug, &sensor->sd, "%s() = %X\n", __func__, code->code); + return 0; +} + +static int ar0521_g_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + + mutex_lock(&sensor->lock); + fi->interval = sensor->current_frame_interval; + mutex_unlock(&sensor->lock); + v4l2_dbg(1, debug, &sensor->sd, "%s() = %u/%u\n", __func__, + fi->interval.numerator, fi->interval.denominator); + return 0; +} + +static int ar0521_s_frame_interval(struct v4l2_subdev *sd, struct v4l2_subdev_frame_interval *fi) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + int ret; + + if (fi->pad) + return -EINVAL; + + v4l2_dbg(1, debug, &sensor->sd, "%s(%u/%u)\n", __func__, + fi->interval.numerator, fi->interval.denominator); + mutex_lock(&sensor->lock); + + if (sensor->streaming) { + ret = -EBUSY; + goto out; + } + + sensor->frame_interval = fi->interval; + ar0521_calc_mode(sensor); + ret = ar0521_write_mode(sensor); +out: + mutex_unlock(&sensor->lock); + return ret; +} + +static int ar0521_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct ar0521_dev *sensor = to_ar0521_dev(sd); + int ret; + + v4l2_dbg(1, debug, &sensor->sd, "%s(%i)\n", __func__, enable); + mutex_lock(&sensor->lock); + + ret = ar0521_set_stream(sensor, enable); + sensor->streaming = enable; + + mutex_unlock(&sensor->lock); + return ret; +} + +static const struct v4l2_subdev_core_ops ar0521_core_ops = { + .log_status = v4l2_ctrl_subdev_log_status, + .s_power = ar0521_s_power, + .subscribe_event = v4l2_ctrl_subdev_subscribe_event, + .unsubscribe_event = v4l2_event_subdev_unsubscribe, +}; + +static const struct v4l2_subdev_video_ops ar0521_video_ops = { + .g_frame_interval = ar0521_g_frame_interval, + .s_frame_interval = ar0521_s_frame_interval, + .s_stream = ar0521_s_stream, +}; + +static const struct v4l2_subdev_pad_ops ar0521_pad_ops = { + .enum_mbus_code = ar0521_enum_mbus_code, + .get_fmt = ar0521_get_fmt, + .set_fmt = ar0521_set_fmt, +}; + +static const struct v4l2_subdev_ops ar0521_subdev_ops = { + .core = &ar0521_core_ops, + .video = &ar0521_video_ops, + .pad = &ar0521_pad_ops, +}; + +static int ar0521_probe(struct i2c_client *client, const struct i2c_device_id *id) +{ + struct device *dev = &client->dev; + struct fwnode_handle *endpoint; + struct ar0521_dev *sensor; + unsigned int cnt, nlanes; + int ret; + + v4l2_dbg(1, debug, client, "%s()\n", __func__); + sensor = devm_kzalloc(dev, sizeof(*sensor), GFP_KERNEL); + if (!sensor) + return -ENOMEM; + + sensor->i2c_client = client; + sensor->fmt.code = MEDIA_BUS_FMT_SGRBG8_1X8; + sensor->fmt.width = AR0521_WIDTH_MAX; + sensor->fmt.height = AR0521_HEIGHT_MAX; + sensor->fmt.field = V4L2_FIELD_NONE; + sensor->frame_interval.numerator = 30; + sensor->frame_interval.denominator = 1; + + endpoint = fwnode_graph_get_next_endpoint(of_fwnode_handle(dev->of_node), NULL); + if (!endpoint) { + dev_err(dev, "endpoint node not found\n"); + return -EINVAL; + } + + ret = v4l2_fwnode_endpoint_parse(endpoint, &sensor->ep); + fwnode_handle_put(endpoint); + if (ret) { + dev_err(dev, "could not parse endpoint\n"); + return ret; + } + + if (sensor->ep.bus_type != V4L2_MBUS_CSI2_DPHY) { + dev_err(dev, "invalid bus type, must be MIPI CSI2\n"); + return -EINVAL; + } + + nlanes = lanes(sensor); + switch (nlanes) { + case 1: + case 2: + case 4: + break; + default: + dev_err(dev, "invalid number of MIPI data lane%s\n", nlanes > 1 ? "s" : ""); + return -EINVAL; + } + + // get master clock (extclk) + sensor->extclk = devm_clk_get(dev, "extclk"); + if (IS_ERR(sensor->extclk)) { + dev_err(dev, "failed to get extclk\n"); + return PTR_ERR(sensor->extclk); + } + + ret = clk_set_rate(sensor->extclk, AR0521_EXTCLK_RATE); + if (ret < 0) { + dev_err(dev, "error setting clock rate\n"); + return ret; + } + + sensor->extclk_freq = clk_get_rate(sensor->extclk); + + if (sensor->extclk_freq < AR0521_EXTCLK_MIN || + sensor->extclk_freq > AR0521_EXTCLK_MAX) { + dev_err(dev, "extclk frequency out of range: %u Hz\n", sensor->extclk_freq); + return -EINVAL; + } + + // request optional reset pin (usually active low) and assert it + sensor->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + + v4l2_i2c_subdev_init(&sensor->sd, client, &ar0521_subdev_ops); + + sensor->sd.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; + sensor->pad.flags = MEDIA_PAD_FL_SOURCE; + sensor->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR; + ret = media_entity_pads_init(&sensor->sd.entity, 1, &sensor->pad); + if (ret) + return ret; + + for (cnt = 0; cnt < AR0521_NUM_SUPPLIES; cnt++) { + struct regulator *supply = devm_regulator_get(dev, ar0521_supply_names[cnt]); + + if (IS_ERR(supply)) { + dev_info(dev, "no %s regulator found: %li\n", ar0521_supply_names[cnt], PTR_ERR(supply)); + return PTR_ERR(supply); + } + sensor->supplies[cnt] = supply; + } + + mutex_init(&sensor->lock); + + ret = ar0521_init_controls(sensor); + if (ret) + goto entity_cleanup; + + ret = v4l2_async_register_subdev(&sensor->sd); + if (ret) + goto free_ctrls; + + ar0521_adj_fmt(&sensor->fmt); + + dev_info(dev, "AR0521 driver initialized, master clock frequency: %s MHz, %u MIPI data lanes\n", + mhz(sensor->extclk_freq), nlanes); + return 0; + +free_ctrls: + v4l2_ctrl_handler_free(&sensor->ctrls.handler); +entity_cleanup: + media_entity_cleanup(&sensor->sd.entity); + mutex_destroy(&sensor->lock); + return ret; +} + +static int ar0521_remove(struct i2c_client *client) +{ + struct v4l2_subdev *sd = i2c_get_clientdata(client); + struct ar0521_dev *sensor = to_ar0521_dev(sd); + + v4l2_async_unregister_subdev(&sensor->sd); + media_entity_cleanup(&sensor->sd.entity); + v4l2_ctrl_handler_free(&sensor->ctrls.handler); + mutex_destroy(&sensor->lock); + return 0; +} + +static const struct i2c_device_id ar0521_id[] = { + {"ar0521", 0}, + {}, +}; +MODULE_DEVICE_TABLE(i2c, ar0521_id); + +static const struct of_device_id ar0521_dt_ids[] = { + {.compatible = "onnn,ar0521"}, + {} +}; +MODULE_DEVICE_TABLE(of, ar0521_dt_ids); + +static struct i2c_driver ar0521_i2c_driver = { + .driver = { + .name = "ar0521", + .of_match_table = ar0521_dt_ids, + }, + .id_table = ar0521_id, + .probe = ar0521_probe, + .remove = ar0521_remove, +}; + +module_i2c_driver(ar0521_i2c_driver); + +MODULE_DESCRIPTION("AR0521 MIPI Camera subdev driver"); +MODULE_AUTHOR("Krzysztof Hałasa "); +MODULE_LICENSE("GPL v2");