@@ -78,6 +78,8 @@
#define MAX_CHANNELS 4
#define S2255_MARKER_FRAME 0x2255DA4AL
#define S2255_MARKER_RESPONSE 0x2255ACACL
+#define S2255_RESPONSE_SETMODE 0x01
+#define S2255_RESPONSE_FW 0x10
#define S2255_USB_XFER_SIZE (16 * 1024)
#define MAX_CHANNELS 4
#define MAX_PIPE_BUFFERS 1
@@ -179,9 +181,6 @@ struct s2255_bufferi {
struct s2255_dmaqueue {
struct list_head active;
- /* thread for acquisition */
- struct task_struct *kthread;
- int frame;
struct s2255_dev *dev;
int channel;
};
@@ -211,16 +210,11 @@ struct s2255_pipeinfo {
u32 max_transfer_size;
u32 cur_transfer_size;
u8 *transfer_buffer;
- u32 transfer_flags;;
u32 state;
- u32 prev_state;
- u32 urb_size;
void *stream_urb;
void *dev; /* back pointer to s2255_dev struct*/
u32 err_count;
- u32 buf_index;
u32 idx;
- u32 priority_set;
};
struct s2255_fmt; /*forward declaration */
@@ -240,8 +234,6 @@ struct s2255_dev {
struct list_head s2255_devlist;
struct timer_list timer;
struct s2255_fw *fw_data;
- int board_num;
- int is_open;
struct s2255_pipeinfo pipes[MAX_PIPE_BUFFERS];
struct s2255_bufferi buffer[MAX_CHANNELS];
struct s2255_mode mode[MAX_CHANNELS];
@@ -298,9 +290,10 @@ struct s2255_fh {
int resources[MAX_CHANNELS];
};
-#define CUR_USB_FWVER 774 /* current cypress EEPROM firmware version */
+/* current cypress EEPROM firmware version */
+#define S2255_CUR_USB_FWVER ((3 << 8) | 6)
#define S2255_MAJOR_VERSION 1
-#define S2255_MINOR_VERSION 13
+#define S2255_MINOR_VERSION 14
#define S2255_RELEASE 0
#define S2255_VERSION KERNEL_VERSION(S2255_MAJOR_VERSION, \
S2255_MINOR_VERSION, \
@@ -1819,7 +1812,6 @@ static int s2255_probe_v4l(struct s2255_
INIT_LIST_HEAD(&dev->vidq[i].active);
dev->vidq[i].dev = dev;
dev->vidq[i].channel = i;
- dev->vidq[i].kthread = NULL;
/* register 4 video devices */
dev->vdev[i] = video_device_alloc();
memcpy(dev->vdev[i], &template, sizeof(struct video_device));
@@ -1840,7 +1832,9 @@ static int s2255_probe_v4l(struct s2255_
return ret;
}
}
- printk(KERN_INFO "Sensoray 2255 V4L driver\n");
+ printk(KERN_INFO "Sensoray 2255 V4L driver Revision: %d.%d\n",
+ S2255_MAJOR_VERSION,
+ S2255_MINOR_VERSION);
return ret;
}
@@ -1930,14 +1924,14 @@ static int save_frame(struct s2255_dev *
if (!(cc >= 0 && cc < MAX_CHANNELS))
break;
switch (pdword[2]) {
- case 0x01:
+ case S2255_RESPONSE_SETMODE:
/* check if channel valid */
/* set mode ready */
dev->setmode_ready[cc] = 1;
wake_up(&dev->wait_setmode[cc]);
dprintk(5, "setmode ready %d\n", cc);
break;
- case 0x10:
+ case S2255_RESPONSE_FW:
dev->chn_ready |= (1 << cc);
if ((dev->chn_ready & 0x0f) != 0x0f)
@@ -2173,10 +2167,15 @@ static int s2255_board_init(struct s2255
/* query the firmware */
fw_ver = s2255_get_fx2fw(dev);
- printk(KERN_INFO "2255 usb firmware version %d \n", fw_ver);
- if (fw_ver < CUR_USB_FWVER)
+ printk(KERN_INFO "2255 usb firmware version %d.%d\n",
+ (fw_ver >> 8) & 0xff,
+ fw_ver & 0xff);
+
+ if (fw_ver < S2255_CUR_USB_FWVER)
dev_err(&dev->udev->dev,
- "usb firmware not up to date %d\n", fw_ver);
+ "usb firmware not up to date %d.%d\n",
+ (fw_ver >> 8) & 0xff,
+ fw_ver & 0xff);
for (j = 0; j < MAX_CHANNELS; j++) {
dev->b_acquire[j] = 0;
@@ -2284,8 +2283,7 @@ static int s2255_start_readpipe(struct s
for (i = 0; i < MAX_PIPE_BUFFERS; i++) {
pipe_info->state = 1;
- pipe_info->buf_index = (u32) i;
- pipe_info->priority_set = 0;
+ pipe_info->err_count = 0;
pipe_info->stream_urb = usb_alloc_urb(0, GFP_KERNEL);
if (!pipe_info->stream_urb) {
dev_err(&dev->udev->dev,
@@ -2299,7 +2297,6 @@ static int s2255_start_readpipe(struct s
pipe_info->cur_transfer_size,
read_pipe_completion, pipe_info);
- pipe_info->urb_size = sizeof(pipe_info->stream_urb);
dprintk(4, "submitting URB %p\n", pipe_info->stream_urb);
retval = usb_submit_urb(pipe_info->stream_urb, GFP_KERNEL);
if (retval) {
@@ -2404,8 +2401,6 @@ static void s2255_stop_readpipe(struct s
if (pipe_info->state == 0)
continue;
pipe_info->state = 0;
- pipe_info->prev_state = 1;
-
}
}
@@ -2543,7 +2538,9 @@ static int s2255_probe(struct usb_interf
s2255_probe_v4l(dev);
usb_reset_device(dev->udev);
/* load 2255 board specific */
- s2255_board_init(dev);
+ retval = s2255_board_init(dev);
+ if (retval)
+ goto error;
dprintk(4, "before probe done %p\n", dev);
spin_lock_init(&dev->slock);