@@ -89,16 +89,21 @@ ATSC (version 1) 8-VSB and 16-VSB.
DMTB 4-QAM, 16-QAM, 32-QAM, 64-QAM and 4-QAM-NR.
DVB-C Annex A/C 16-QAM, 32-QAM, 64-QAM and 256-QAM.
DVB-C Annex B 64-QAM.
+DVB-C2 QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM and 4096-QAM.
DVB-T QPSK, 16-QAM and 64-QAM.
DVB-T2 QPSK, 16-QAM, 64-QAM and 256-QAM.
DVB-S No need to set. It supports only QPSK.
DVB-S2 QPSK, 8-PSK, 16-APSK and 32-APSK.
+DVB-S2X 8-APSK-L, 16-APSK-L, 32-APSK-L, 64-APSK and 64-APSK-L.
ISDB-T QPSK, DQPSK, 16-QAM and 64-QAM.
ISDB-S 8-PSK, QPSK and BPSK.
======================= =======================================================
.. note::
+ As DVB-S2X specifies extensions to the DVB-S2 standard, the same
+ delivery system enum value is used (SYS_DVBS2).
+
Please notice that some of the above modulation types may not be
defined currently at the Kernel. The reason is simple: no driver
needed such definition yet.
@@ -854,9 +859,10 @@ The acceptable values are defined by :c:type:`fe_guard_interval`.
#. If ``DTV_GUARD_INTERVAL`` is set the ``GUARD_INTERVAL_AUTO`` the
hardware will try to find the correct guard interval (if capable) and
will use TMCC to fill in the missing parameters.
- #. Intervals ``GUARD_INTERVAL_1_128``, ``GUARD_INTERVAL_19_128``
- and ``GUARD_INTERVAL_19_256`` are used only for DVB-T2 at
- present.
+ #. Interval ``GUARD_INTERVAL_1_64`` is used only for DVB-C2.
+ #. Interval ``GUARD_INTERVAL_1_128`` is used for both DVB-C2 and DVB_T2.
+ #. Intervals ``GUARD_INTERVAL_19_128`` and ``GUARD_INTERVAL_19_256`` are
+ used only for DVB-T2.
#. Intervals ``GUARD_INTERVAL_PN420``, ``GUARD_INTERVAL_PN595`` and
``GUARD_INTERVAL_PN945`` are used only for DMTB at the present.
On such standard, only those intervals and ``GUARD_INTERVAL_AUTO``
@@ -916,14 +922,15 @@ The acceptable values are defined by :c:type:`fe_hierarchy`.
DTV_STREAM_ID
=============
-Used on DVB-S2, DVB-T2 and ISDB-S.
+Used on DVB-C2, DVB-S2, DVB-T2 and ISDB-S.
-DVB-S2, DVB-T2 and ISDB-S support the transmission of several streams on
-a single transport stream. This property enables the digital TV driver to
-handle substream filtering, when supported by the hardware. By default,
-substream filtering is disabled.
+DVB-C2, DVB-S2, DVB-T2 and ISDB-S support the transmission of several
+streams on a single transport stream. This property enables the digital
+TV driver to handle substream filtering, when supported by the hardware.
+By default, substream filtering is disabled.
-For DVB-S2 and DVB-T2, the valid substream id range is from 0 to 255.
+For DVB-C2, DVB-S2 and DVB-T2, the valid substream id range is from 0 to
+255.
For ISDB, the valid substream id range is from 1 to 65535.
@@ -296,6 +296,22 @@ enum fe_spectral_inversion {
* @FEC_3_5: Forward Error Correction Code 3/5
* @FEC_9_10: Forward Error Correction Code 9/10
* @FEC_2_5: Forward Error Correction Code 2/5
+ * @FEC_1_3: Forward Error Correction Code 1/3
+ * @FEC_1_4: Forward Error Correction Code 1/4
+ * @FEC_5_9: Forward Error Correction Code 5/9
+ * @FEC_7_9: Forward Error Correction Code 7/9
+ * @FEC_8_15: Forward Error Correction Code 8/15
+ * @FEC_11_15: Forward Error Correction Code 11/15
+ * @FEC_13_18: Forward Error Correction Code 13/18
+ * @FEC_9_20: Forward Error Correction Code 9/20
+ * @FEC_11_20: Forward Error Correction Code 11/20
+ * @FEC_23_36: Forward Error Correction Code 23/36
+ * @FEC_25_36: Forward Error Correction Code 25/36
+ * @FEC_13_45: Forward Error Correction Code 13/45
+ * @FEC_26_45: Forward Error Correction Code 26/45
+ * @FEC_28_45: Forward Error Correction Code 28/45
+ * @FEC_32_45: Forward Error Correction Code 32/45
+ * @FEC_77_90: Forward Error Correction Code 77/90
*
* Please note that not all FEC types are supported by a given standard.
*/
@@ -313,6 +329,22 @@ enum fe_code_rate {
FEC_3_5,
FEC_9_10,
FEC_2_5,
+ FEC_1_3,
+ FEC_1_4,
+ FEC_5_9,
+ FEC_7_9,
+ FEC_8_15,
+ FEC_11_15,
+ FEC_13_18,
+ FEC_9_20,
+ FEC_11_20,
+ FEC_23_36,
+ FEC_25_36,
+ FEC_13_45,
+ FEC_26_45,
+ FEC_28_45,
+ FEC_32_45,
+ FEC_77_90,
};
/**
@@ -331,6 +363,13 @@ enum fe_code_rate {
* @APSK_32: 32-APSK modulation
* @DQPSK: DQPSK modulation
* @QAM_4_NR: 4-QAM-NR modulation
+ * @QAM-1024: 1024-QAM modulation
+ * @QAM-4096: 4096-QAM modulation
+ * @APSK_8_L: 8APSK-L modulation
+ * @APSK_16_L: 16APSK-L modulation
+ * @APSK_32_L: 32APSK-L modulation
+ * @APSK_64: 64APSK modulation
+ * @APSK_64_L: 64APSK-L modulation
*
* Please note that not all modulations are supported by a given standard.
*
@@ -350,6 +389,13 @@ enum fe_modulation {
APSK_32,
DQPSK,
QAM_4_NR,
+ QAM_1024,
+ QAM_4096,
+ APSK_8_L,
+ APSK_16_L,
+ APSK_32_L,
+ APSK_64,
+ APSK_64_L,
};
/**
@@ -404,6 +450,7 @@ enum fe_transmit_mode {
* @GUARD_INTERVAL_PN420: PN length 420 (1/4)
* @GUARD_INTERVAL_PN595: PN length 595 (1/6)
* @GUARD_INTERVAL_PN945: PN length 945 (1/9)
+ * @GUARD_INTERVAL_1_64: Guard interval 1/64
*
* Please note that not all guard intervals are supported by a given standard.
*/
@@ -419,6 +466,7 @@ enum fe_guard_interval {
GUARD_INTERVAL_PN420,
GUARD_INTERVAL_PN595,
GUARD_INTERVAL_PN945,
+ GUARD_INTERVAL_1_64,
};
/**
@@ -571,6 +619,9 @@ enum fe_pilot {
* @ROLLOFF_20: Roloff factor: α=20%
* @ROLLOFF_25: Roloff factor: α=25%
* @ROLLOFF_AUTO: Auto-detect the roloff factor.
+ * @ROLLOFF_15: Rolloff factor: α=15%
+ * @ROLLOFF_10: Rolloff factor: α=10%
+ * @ROLLOFF_5: Rolloff factor: α=5%
*
* .. note:
*
@@ -581,6 +632,9 @@ enum fe_rolloff {
ROLLOFF_20,
ROLLOFF_25,
ROLLOFF_AUTO,
+ ROLLOFF_15,
+ ROLLOFF_10,
+ ROLLOFF_5,
};
/**
@@ -594,6 +648,8 @@ enum fe_rolloff {
* Cable TV: DVB-C following ITU-T J.83 Annex B spec (ClearQAM)
* @SYS_DVBC_ANNEX_C:
* Cable TV: DVB-C following ITU-T J.83 Annex C spec
+ * @SYS_DVBC2:
+ * Cable TV: DVB-C2
* @SYS_ISDBC:
* Cable TV: ISDB-C (no drivers yet)
* @SYS_DVBT:
@@ -611,7 +667,7 @@ enum fe_rolloff {
* @SYS_DVBS:
* Satellite TV: DVB-S
* @SYS_DVBS2:
- * Satellite TV: DVB-S2
+ * Satellite TV: DVB-S2 and DVB-S2X
* @SYS_TURBO:
* Satellite TV: DVB-S Turbo
* @SYS_ISDBS:
@@ -645,6 +701,7 @@ enum fe_delivery_system {
SYS_DVBT2,
SYS_TURBO,
SYS_DVBC_ANNEX_C,
+ SYS_DVBC2,
};
/* backward compatibility definitions for delivery systems */
Extend the DVB frontend parameter enums with additional values specified by the DVB-C2 (ETSI EN 302 769) and DVB-S2X (ETSI EN 302 307-2) standards to be ready for frontend drivers for such receivers. While most parameters will be "read-only" due to being autodetected by the receiver and only being reported back for informational purposes, the addition of SYS_DVBC2 to the delivery systems enum is required, because there are DVB-C2 capable receivers which are not capable of DVB-C/C2 autodetection and thus need this enum value to be explicitly instructed to search for a DVB-C2 signal. As for DVB-S2X, as that is an extension to DVB-S2, the same delivery system enum as for DVB-S2 can be used. Add the additional enum values and comments to the documentation. Signed-off-by: Robert Schlabbach <robert_s@gmx.net> --- .../media/dvb/fe_property_parameters.rst | 25 +++++--- include/uapi/linux/dvb/frontend.h | 59 ++++++++++++++++++- 2 files changed, 74 insertions(+), 10 deletions(-)