@@ -513,12 +513,21 @@ static int tw9910_set_bus_param(struct soc_camera_device *icd,
{
struct v4l2_subdev *sd = soc_camera_to_subdev(icd);
struct i2c_client *client = sd->priv;
+ u8 val = VSSL_VVALID | HSSL_DVALID;
/*
* set OUTCTR1
+ *
+ * We use VVALID and DVALID signals to control VSYNC and HSYNC
+ * outputs, in this mode their polarity is inverted.
*/
- return i2c_smbus_write_byte_data(client, OUTCTR1,
- VSSL_VVALID | HSSL_DVALID);
+ if (flags & SOCAM_HSYNC_ACTIVE_LOW)
+ val |= HSP_HI;
+
+ if (flags & SOCAM_VSYNC_ACTIVE_LOW)
+ val |= VSP_HI;
+
+ return i2c_smbus_write_byte_data(client, OUTCTR1, val);
}
static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
@@ -528,6 +537,7 @@ static unsigned long tw9910_query_bus_param(struct soc_camera_device *icd)
struct soc_camera_link *icl = to_soc_camera_link(icd);
unsigned long flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_MASTER |
SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_HSYNC_ACTIVE_HIGH |
+ SOCAM_VSYNC_ACTIVE_LOW | SOCAM_HSYNC_ACTIVE_LOW |
SOCAM_DATA_ACTIVE_HIGH | priv->info->buswidth;
return soc_camera_apply_sensor_flags(icl, flags);