[v2,0/8] Add Mediatek thermal dirver and dtsi

Message

Michael Kao May 10, 2019, 1:26 p.m. UTC

This patchset supports for MT8183 chip to mtk_thermal.c.
Add thermal zone of all the thermal sensor in SoC for
another get temperatrue. They don't need to thermal throttle.
And we bind coolers for thermal zone nodes of cpu_thermal.

This patch series base on these patches [1][2][3][4].

[1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
[2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
[3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
[4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)

Matthias Kaehlcke (2):
	arm64: dts: mt8183: Configure CPU cooling
	arm64: dts: mt8183: Increase polling frequency for CPU thermal zone

Michael Kao (6):
	arm64: dts: mt8183: add thermal zone node
	arm64: dts: mt8183: add/update dynamic power coefficients
	arm64: dts: mt8183: Add #cooling-cells to CPU nodes
	thermal: mediatek: mt8183: fix bank number settings
	thermal: mediatek: add another get_temp ops for thermal sensors
	thermal: mediatek: use spinlock to protect PTPCORESEL

arch/arm64/boot/dts/mediatek/mt8183.dtsi | 158 +++++++++++++++++++++++++++++++
drivers/thermal/mtk_thermal.c            |  82 +++++++++++++---
2 files changed, 226 insertions(+), 14 deletions(-)

Comments

Daniel Lezcano Dec. 5, 2019, 4:38 p.m. UTC | #1

What is the status of this series? Shouldn't we have a V3?

On 10/05/2019 15:26, michael.kao wrote:
> This patchset supports for MT8183 chip to mtk_thermal.c.
> Add thermal zone of all the thermal sensor in SoC for
> another get temperatrue. They don't need to thermal throttle.
> And we bind coolers for thermal zone nodes of cpu_thermal.
> 
> This patch series base on these patches [1][2][3][4].
> 
> [1]support for reading chip ID and efuse (https://patchwork.kernel.org/patch/10902131/)
> [2]arm64: dts: mt8183: Add reset-cells in infracfg (https://patchwork.kernel.org/patch/10908653/)
> [3]clk: reset: Modify reset-controller driver (https://patchwork.kernel.org/patch/10908657/)
> [4]PM / AVS: SVS: Introduce SVS engine (https://patchwork.kernel.org/patch/10923289/)
> 
> Matthias Kaehlcke (2):
> 	arm64: dts: mt8183: Configure CPU cooling
> 	arm64: dts: mt8183: Increase polling frequency for CPU thermal zone
> 
> Michael Kao (6):
> 	arm64: dts: mt8183: add thermal zone node
> 	arm64: dts: mt8183: add/update dynamic power coefficients
> 	arm64: dts: mt8183: Add #cooling-cells to CPU nodes
> 	thermal: mediatek: mt8183: fix bank number settings
> 	thermal: mediatek: add another get_temp ops for thermal sensors
> 	thermal: mediatek: use spinlock to protect PTPCORESEL
> 
> arch/arm64/boot/dts/mediatek/mt8183.dtsi | 158 +++++++++++++++++++++++++++++++
> drivers/thermal/mtk_thermal.c            |  82 +++++++++++++---
> 2 files changed, 226 insertions(+), 14 deletions(-)
>