[v5,0/3] media: mediatek: support mdp3 on mt8183 platform

Message

Moudy Ho (何宗原) July 19, 2021, 7:46 a.m. UTC

Changes since v4:
- Rebase on v5.13-rc1.
- Remove the CMDQ flush flow to match the CMDQ API change.
- Integrate four of MDP's direct-link subcomponents into MDP controller node
  from syscon node to avoid illegal clock usage.
- Rewrite dt-binding in a JSON compatible subset of YAML
- Fix a bit of macro argument precedence.

Changes since v3:
- Rebase on v5.9-rc1.
- modify code for review comment from Rob Herring, cancel multiple nodes using
  same register base situation.
- control IOMMU port through pm runtime get/put to DMA components' device.
- SCP(VPU) driver revision.
- stop queuing jobs(remove flush_workqueue()) after mdp_m2m_release().
- add computation of plane address with data_offset.
- fix scale ratio check issue.
- add default v4l2_format setting.

Changes since v2:
- modify code for review comment from Tomasz Figa & Alexandre Courbot
- review comment from Rob Herring will offer code revision in v4, due to
  it's related to device node modification, will need to modify code
  architecture

Changes since v1:
- modify code for CMDQ v3 API support
- EC ipi cmd migration
- fix compliance test fail item (m2m cmd with -f)
due to there is two problem in runing all format(-f) cmd:
1. out of memory before test complete
        Due to capture buffer mmap (refcount + 1) after reqbuf but seems
        no corresponding munmap called before device close.
        There are total 12XX items(formats) in format test and each format
        alloc 8 capture/output buffers.
2. unceasingly captureBufs() (randomly)
        Seems the break statement didn't catch the count == 0 situation:
        In v4l2-test-buffers.cpp, function: captureBufs()
                        ...
                        count--;
                        if (!node->is_m2m && !count)
                                break;
        Log is as attachment

I will paste the test result with problem part in another e-mail

Hi,

This is the first version of RFC patch for Media Data Path 3 (MDP3),
MDP3 is used for scaling and color format conversion.
support using GCE to write register in critical time limitation.
support V4L2 m2m device control.

Moudy Ho (3):
  dt-binding: mt8183: Add Mediatek MDP3 dt-bindings
  dts: arm64: mt8183: Add Mediatek MDP3 nodes
  media: platform: mtk-mdp3: Add Mediatek MDP3 driver

 .../bindings/media/mediatek-mdp3.yaml         |  274 ++++
 arch/arm64/boot/dts/mediatek/mt8183.dtsi      |  114 ++
 drivers/media/platform/Kconfig                |   19 +
 drivers/media/platform/Makefile               |    2 +
 drivers/media/platform/mtk-mdp3/Makefile      |    7 +
 drivers/media/platform/mtk-mdp3/isp_reg.h     |   37 +
 .../media/platform/mtk-mdp3/mdp-platform.h    |   58 +
 .../media/platform/mtk-mdp3/mdp_reg_ccorr.h   |   75 +
 .../media/platform/mtk-mdp3/mdp_reg_rdma.h    |  206 +++
 drivers/media/platform/mtk-mdp3/mdp_reg_rsz.h |  109 ++
 .../media/platform/mtk-mdp3/mdp_reg_wdma.h    |  125 ++
 .../media/platform/mtk-mdp3/mdp_reg_wrot.h    |  115 ++
 .../media/platform/mtk-mdp3/mmsys_config.h    |  188 +++
 drivers/media/platform/mtk-mdp3/mmsys_mutex.h |   35 +
 .../media/platform/mtk-mdp3/mmsys_reg_base.h  |   38 +
 drivers/media/platform/mtk-mdp3/mtk-img-ipi.h |  282 ++++
 .../media/platform/mtk-mdp3/mtk-mdp3-cmdq.c   |  524 ++++++
 .../media/platform/mtk-mdp3/mtk-mdp3-cmdq.h   |   52 +
 .../media/platform/mtk-mdp3/mtk-mdp3-comp.c   | 1439 +++++++++++++++++
 .../media/platform/mtk-mdp3/mtk-mdp3-comp.h   |  157 ++
 .../media/platform/mtk-mdp3/mtk-mdp3-core.c   |  261 +++
 .../media/platform/mtk-mdp3/mtk-mdp3-core.h   |   86 +
 .../media/platform/mtk-mdp3/mtk-mdp3-m2m.c    |  797 +++++++++
 .../media/platform/mtk-mdp3/mtk-mdp3-m2m.h    |   42 +
 .../media/platform/mtk-mdp3/mtk-mdp3-regs.c   |  746 +++++++++
 .../media/platform/mtk-mdp3/mtk-mdp3-regs.h   |  373 +++++
 .../media/platform/mtk-mdp3/mtk-mdp3-vpu.c    |  313 ++++
 .../media/platform/mtk-mdp3/mtk-mdp3-vpu.h    |   79 +
 28 files changed, 6553 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/media/mediatek-mdp3.yaml
 create mode 100644 drivers/media/platform/mtk-mdp3/Makefile
 create mode 100644 drivers/media/platform/mtk-mdp3/isp_reg.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp-platform.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp_reg_ccorr.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp_reg_rdma.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp_reg_rsz.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp_reg_wdma.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mdp_reg_wrot.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mmsys_config.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mmsys_mutex.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mmsys_reg_base.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-img-ipi.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-cmdq.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-cmdq.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-comp.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-comp.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-core.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-core.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-m2m.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-m2m.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-regs.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-regs.h
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-vpu.c
 create mode 100644 drivers/media/platform/mtk-mdp3/mtk-mdp3-vpu.h