mbox series

[v4,0/3] This patches provide ADSP IPC support for MT8195

Message ID 20211125122925.1303-1-allen-kh.cheng@mediatek.com (mailing list archive)
Headers show
Series This patches provide ADSP IPC support for MT8195 | expand

Message

Allen-KH Cheng Nov. 25, 2021, 12:29 p.m. UTC 
Mediatek ADSP IPC is used to send notification or short message between
processors with dsp.ยท

It will place the message to the share buffer and will access the ADSP mailbox
registers to kick dsp.

Two mailboxes used to send notification or short message between processors with
dsp

changes since v3:
- reorder MTK_ADSP_IPC_MBOX config
- remove some redundant code
- remove lock in mtk-adsp-mailbox

changes since v2:
- seperate adsp_mailbox into two instances

changes since v1:
- fix dt_binding_check error

Allen-KH Cheng (3):
  dt-bindings: mediatek: add adsp-mbox document
  firmware: mediatek: add adsp ipc protocol interface
  mailbox: mediatek: add support for adsp mailbox controller

 .../bindings/mailbox/mtk,adsp-mbox.yaml       |  52 +++++
 drivers/firmware/Kconfig                      |   1 +
 drivers/firmware/Makefile                     |   1 +
 drivers/firmware/mediatek/Kconfig             |   9 +
 drivers/firmware/mediatek/Makefile            |   2 +
 drivers/firmware/mediatek/mtk-adsp-ipc.c      | 132 +++++++++++++
 drivers/mailbox/Kconfig                       |   7 +
 drivers/mailbox/Makefile                      |   2 +
 drivers/mailbox/mtk-adsp-mailbox.c            | 184 ++++++++++++++++++
 .../linux/firmware/mediatek/mtk-adsp-ipc.h    |  70 +++++++
 10 files changed, 460 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/mtk,adsp-mbox.yaml
 create mode 100644 drivers/firmware/mediatek/Kconfig
 create mode 100644 drivers/firmware/mediatek/Makefile
 create mode 100644 drivers/firmware/mediatek/mtk-adsp-ipc.c
 create mode 100644 drivers/mailbox/mtk-adsp-mailbox.c
 create mode 100644 include/linux/firmware/mediatek/mtk-adsp-ipc.h