[v4,0/3] pinctrl: mediatek: Support pinctrl driver on mt8186

Message

Guodong Liu Feb. 14, 2022, 3:06 a.m. UTC

changes since v3:
- remove generic descriptions for common properties
- remove quotes
- drop "."
- drop "-" on description
- move partial "bias-pull-up" description info to the example
- don't break the code into two lines, maximux 84 columns is fine
- add the required fixes tag

changes since v2:
- update reg property
- update reg-names property
- sync rsel resistance selection property same as patch 3
- repair constraints is not indented correctly for bias-pull-{up,down}
- add "type: boolean" to the list of valid values. This corresponds to having bias-pull-{up,down} without any arguments.
- add dual file license for file "mt8186-pinfunc.h"
- add patch 3 to change "mediatek,rsel_resistance_in_si_unit" to "mediatek,rsel-resistance-in-si-unit"

changes since v1:
- add default pinctrl config to consistent with other MTK pinctrl drivers

Patch 1 add pinctrl file and binding document.

Patch 2 add pinctrl chip driver on mt8186.

Patch 3 canonical rsel resistance selection property.

Guodong Liu (3):
  dt-bindings: pinctrl: mt8186: add pinctrl file and binding document
  pinctrl: add pinctrl driver on mt8186
  pinctrl: canonical rsel resistance selection property

 .../bindings/pinctrl/pinctrl-mt8186.yaml      |  302 +++
 drivers/pinctrl/mediatek/Kconfig              |    7 +
 drivers/pinctrl/mediatek/Makefile             |    1 +
 drivers/pinctrl/mediatek/pinctrl-mt8186.c     | 1311 ++++++++++
 drivers/pinctrl/mediatek/pinctrl-mtk-mt8186.h | 2186 +++++++++++++++++
 drivers/pinctrl/mediatek/pinctrl-paris.c      |    2 +-
 include/dt-bindings/pinctrl/mt8186-pinfunc.h  | 1174 +++++++++
 7 files changed, 4982 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/pinctrl-mt8186.yaml
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt8186.c
 create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt8186.h
 create mode 100644 include/dt-bindings/pinctrl/mt8186-pinfunc.h