mbox series

[v6,0/2] Add MediaTek MT8365 I2C support

Message ID 20221122-mt8365-i2c-support-v6-0-e1009c8afd53@baylibre.com (mailing list archive)
Headers show
Series Add MediaTek MT8365 I2C support | expand

Message

Alexandre Mergnat March 28, 2023, 9:04 a.m. UTC 
Hi,
This patch series adds I2C support for MT8365-EVK board.
The I2C-0 is enabled, it can be used through the board pin header,
as described directly on the PCB.

This series depends to another one which add support for
MT8365 SoC and EVK board. Link [1]
This dependancy has been applied by Matthias Brugger [3]

One patch has been cherry-picked from [2], so I've addressed the comment
and kept the trailer.

Regards,
Alex

[1]: https://lore.kernel.org/linux-mediatek/20230101220149.3035048-1-bero@baylibre.com/
[2]: https://lore.kernel.org/all/20220531135026.238475-2-fparent@baylibre.com/
[3]: https://lore.kernel.org/all/ed1f9faf-cb4f-9ff1-ab6b-813035a051bd@gmail.com/

Signed-off-by: Alexandre Mergnat <amergnat@baylibre.com>
---
Changes in v6:
- Remove mediatek,pull-up-adv which is a deprecated pin-control property.
- Link to v5: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v5-0-6e4f3b54937f@baylibre.com

Changes in v5:
- Remove mediatek,drive-strength-adv which is a deprecated pin-control property.
- Link to v4: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v4-0-885ad3301d5a@baylibre.com

Changes in v4:
- Fix some properties order.
- Remove the useless properties.
- Link to v3: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v3-0-ad9bb1076d7f@baylibre.com

Changes in v3:
- Rebased to v6.3-rc1.
- Move i2c3 node to be consistent with the SoC address order.
- Link to v2: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v2-0-e4c7c514e781@baylibre.com

Changes in v2:
- Drop the patch which do useless change in i2c-mt65xx.c driver.
- Change 2 lines compatible/reg in oneline.
- Link to v1: https://lore.kernel.org/r/20221122-mt8365-i2c-support-v1-0-4aeb7c54c67b@baylibre.com

---
Alexandre Mergnat (2):
      arm64: dts: mediatek: add i2c support for mt8365 SoC
      arm64: dts: mediatek: enable i2c0 for mt8365-evk board

 arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 15 +++++++++
 arch/arm64/boot/dts/mediatek/mt8365.dtsi    | 48 +++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)
---
base-commit: 5c6b974d24c21a6aa5d8b524067d7d9bc7fcc4f2
change-id: 20221122-mt8365-i2c-support-fc048da261ea

Best regards,