| Message ID | 20240208-for-netnext-mt7530-improvements-3-v1-0-d7c1cfd502ca@arinc9.com (mailing list archive) |
|---|---|
| Headers | show |
| Series | MT7530 DSA Subdriver Improvements Act III | expand |
On Thu, Feb 08, 2024 at 08:51:28AM +0300, Arınç ÜNAL via B4 Relay wrote: > Hello! > > This is the third patch series with the goal of simplifying the MT7530 DSA > subdriver and improving support for MT7530, MT7531, and the switch on the > MT7988 SoC. There was an automation failure, you used the name "netnext" in the subject prefix and patchwork reacted with "Patch does not apply to net"... Please resend to get some build testing. I gave a quick look over the patches and I didn't see anything obviously objectionable.
On 16.02.2024 04:34, Vladimir Oltean wrote: > On Thu, Feb 08, 2024 at 08:51:28AM +0300, Arınç ÜNAL via B4 Relay wrote: >> Hello! >> >> This is the third patch series with the goal of simplifying the MT7530 DSA >> subdriver and improving support for MT7530, MT7531, and the switch on the >> MT7988 SoC. > > There was an automation failure, you used the name "netnext" in the > subject prefix and patchwork reacted with "Patch does not apply to net"... > > Please resend to get some build testing. I gave a quick look over the > patches and I didn't see anything obviously objectionable. Ok then. Arınç
Hello! This is the third patch series with the goal of simplifying the MT7530 DSA subdriver and improving support for MT7530, MT7531, and the switch on the MT7988 SoC. I have done a simple ping test to confirm basic communication on all switch ports on MCM and standalone MT7530, and MT7531 switch with this patch series applied. MT7621 Unielec, MCM MT7530: rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000 MT7622 Bananapi, MT7531: gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000 MT7623 Bananapi, standalone MT7530: rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000 This patch series is the continuation of the patch series linked below. https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com> --- Arınç ÜNAL (8): net: dsa: mt7530: remove .mac_port_config for MT7988 and make it optional net: dsa: mt7530: set interrupt register only for MT7530 net: dsa: mt7530: do not use SW_PHY_RST to reset MT7531 switch net: dsa: mt7530: get rid of useless error returns on phylink code path net: dsa: mt7530: get rid of priv->info->cpu_port_config() net: dsa: mt7530: get rid of mt753x_mac_config() net: dsa: mt7530: put initialising PCS devices code back to original order net: dsa: mt7530: simplify link operations and force link down on all ports drivers/net/dsa/mt7530.c | 259 ++++++++--------------------------------------- drivers/net/dsa/mt7530.h | 19 +--- 2 files changed, 47 insertions(+), 231 deletions(-) --- base-commit: b6b614558ed5b2ca50edacc0f2fbf5f52158c86c change-id: 20240131-for-netnext-mt7530-improvements-3-a8ac49d4f7c2 Best regards,