[v4,0/8] Support Multi-frequency scale for UFS

Message

Ziqi Chen Feb. 10, 2025, 10:02 a.m. UTC

With OPP V2 enabled, devfreq can scale clocks amongst multiple frequency
plans. However, the gear speed is only toggled between min and max during
clock scaling. Enable multi-level gear scaling by mapping clock frequencies
to gear speeds, so that when devfreq scales clock frequencies we can put
the UFS link at the appropraite gear speeds accordingly.

This series has been tested on below platforms -
sm8550 mtp + UFS3.1
SM8650 MTP + UFS3.1
SM8750 MTP + UFS4.0

Tested-by: Neil Armstrong <[e-mail]> # on SM8550-QRD
Tested-by: Neil Armstrong <[e-mail]> # on SM8550-HDK
Tested-by: Neil Armstrong <[e-mail]> # on SM8650-HDK 

v1 -> v2:
1. Withdraw old patch 8/8 "ARM: dts: msm: Use Operation Points V2 for UFS on SM8650"
2. Add new patch 8/8 "ABI: sysfs-driver-ufs: Add missing UFS sysfs addributes"
3. Modify commit message for  "scsi: ufs: core: Pass target_freq to clk_scale_notify() vops" and "scsi: ufs: qcom: Pass target_freq to clk scale pre and post change"
4. In "scsi: ufs: qcom: Pass target_freq to clk scale pre and post change", use common Macro HZ_PER_MHZ in function ufs_qcom_set_core_clk_ctrl()
5. In "scsi: ufs: qcom: Implement the freq_to_gear_speed() vops", print out freq and gear info as debugging message
6. In "scsi: ufs: core: Enable multi-level gear scaling", rename the lable "do_pmc" to "config_pwr_mode"
7. In "scsi: ufs: core: Toggle Write Booster during clock", initialize the local variables "wb_en" as "false"

v2 -> v3:
1. Change 'vops' to 'vop' in all commit message
2. keep the indentation consistent for clk_scale_notify() definition.
3. In "scsi: ufs: core: Add a vop to map clock frequency to gear speed", "scsi: ufs: qcom: Implement the freq_to_gear_speed() vop"
   and "scsi: ufs: core: Enable multi-level gear scaling", remove the parameter 'gear' and use it as return result in function freq_to_gear_speed()
4. In "scsi: ufs: qcom: Implement the freq_to_gear_speed(), removed the variable 'ret' in function ufs_qcom_freq_to_gear_speed()
5. In "scsi: ufs: core: Enable multi-level gear scaling", use assignment instead memcpy() in function ufshcd_scale_gear()
6. Improve the grammar of attributes' descriptions in “ABI: sysfs-driver-ufs: Add missing UFS sysfs attributes”
7. Typo fixed for some commit messages.

v3 -> v4:
1. In "scsi: ufs: core: Toggle Write Booster during clock scaling base on gear speed":
	a. Add comment for default initialized wb_gear
	b. Remove the unnecessary variable “wb_en" in function ufshcd_clock_scaling_unprepare()
2. Typo fixed for commit message of "scsi: ufs: core: Enable multi-level gear scaling"
3. Make the description words are more standardized in "ABI: sysfs-driver-ufs: Add missing UFS sysfs attributes"

Can Guo (6):
  scsi: ufs: core: Pass target_freq to clk_scale_notify() vop
  scsi: ufs: qcom: Pass target_freq to clk scale pre and post change
  scsi: ufs: core: Add a vop to map clock frequency to gear speed

Can Guo (6):
  scsi: ufs: core: Pass target_freq to clk_scale_notify() vop
  scsi: ufs: qcom: Pass target_freq to clk scale pre and post change
  scsi: ufs: core: Add a vop to map clock frequency to gear speed
  scsi: ufs: qcom: Implement the freq_to_gear_speed() vop
  scsi: ufs: core: Enable multi-level gear scaling
  scsi: ufs: core: Toggle Write Booster during clock scaling base on
    gear speed

Ziqi Chen (2):
  scsi: ufs: core: Check if scaling up is required when disable clkscale
  ABI: sysfs-driver-ufs: Add missing UFS sysfs attributes

 Documentation/ABI/testing/sysfs-driver-ufs | 33 ++++++++++
 drivers/ufs/core/ufshcd-priv.h             | 15 ++++-
 drivers/ufs/core/ufshcd.c                  | 71 +++++++++++++++++-----
 drivers/ufs/host/ufs-mediatek.c            |  1 +
 drivers/ufs/host/ufs-qcom.c                | 62 ++++++++++++++-----
 include/ufs/ufshcd.h                       |  9 ++-
 6 files changed, 156 insertions(+), 35 deletions(-)