mbox series

[net-next,0/9] net: dsa: mt7530: updates for phylink changes

Message ID Yk1iHCy4fqvxsvu0@shell.armlinux.org.uk (mailing list archive)
Headers show
Series net: dsa: mt7530: updates for phylink changes | expand

Message

Russell King (Oracle) April 6, 2022, 9:49 a.m. UTC
Hi,

This revised series is a partial conversion of the mt7530 DSA driver to
the modern phylink infrastructure. This driver has some exceptional
cases which prevent - at the moment - its full conversion (particularly
with the Autoneg bit) to using phylink_generic_validate().

Patch 1 fixes the incorrect test highlighted in the first RFC series.

Patch 2 fixes the incorrect assumption that RGMII is unable to support
1000BASE-X.

Patch 3 populates the supported_interfaces for each port

Patch 4 removes the interface checks that become unnecessary as a result
of patch 3.

Patch 5 removes use of phylink_helper_basex_speed() which is no longer
required by phylink.

Patch 6 becomes possible after patch 5, only indicating the ethtool
modes that can be supported with a particular interface mode - this
involves removing some modes and adding others as per phylink
documentation.

Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
the driver as close as we can to phylink_generic_validate() due to the
Autoneg bit issue mentioned above.

Patch 8 converts the driver to the phylink pcs support, removing a bunch
of driver private indirected methods. We include TRGMII as a PCS even
though strictly TRGMII does not have a PCS. This is convenient to allow
the change in patch 9 to be made.

Patch 9 moves the special autoneg handling to the PCS validate method,
which means we can convert the MAC side to the generic validator.

Patch 10 marks the driver as non-legacy.

The series was posted on 23 February, and a ping sent on 3 March, but
no feedback has been received. The previous posting also received no
feedback on the actual patches either.

 drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
 drivers/net/dsa/mt7530.h |  26 ++--
 2 files changed, 159 insertions(+), 197 deletions(-)

Comments

Marek BehĂșn April 6, 2022, 10:35 p.m. UTC | #1
On Wed, 6 Apr 2022 10:49:16 +0100
"Russell King (Oracle)" <linux@armlinux.org.uk> wrote:

> Hi,
> 
> This revised series is a partial conversion of the mt7530 DSA driver to
> the modern phylink infrastructure. This driver has some exceptional
> cases which prevent - at the moment - its full conversion (particularly
> with the Autoneg bit) to using phylink_generic_validate().
> 
> Patch 1 fixes the incorrect test highlighted in the first RFC series.
> 
> Patch 2 fixes the incorrect assumption that RGMII is unable to support
> 1000BASE-X.
> 
> Patch 3 populates the supported_interfaces for each port
> 
> Patch 4 removes the interface checks that become unnecessary as a result
> of patch 3.
> 
> Patch 5 removes use of phylink_helper_basex_speed() which is no longer
> required by phylink.
> 
> Patch 6 becomes possible after patch 5, only indicating the ethtool
> modes that can be supported with a particular interface mode - this
> involves removing some modes and adding others as per phylink
> documentation.
> 
> Patch 7 switches the driver to use phylink_get_linkmodes(), which moves
> the driver as close as we can to phylink_generic_validate() due to the
> Autoneg bit issue mentioned above.
> 
> Patch 8 converts the driver to the phylink pcs support, removing a bunch
> of driver private indirected methods. We include TRGMII as a PCS even
> though strictly TRGMII does not have a PCS. This is convenient to allow
> the change in patch 9 to be made.
> 
> Patch 9 moves the special autoneg handling to the PCS validate method,
> which means we can convert the MAC side to the generic validator.
> 
> Patch 10 marks the driver as non-legacy.
> 
> The series was posted on 23 February, and a ping sent on 3 March, but
> no feedback has been received. The previous posting also received no
> feedback on the actual patches either.
> 
>  drivers/net/dsa/mt7530.c | 330 +++++++++++++++++++++--------------------------
>  drivers/net/dsa/mt7530.h |  26 ++--
>  2 files changed, 159 insertions(+), 197 deletions(-)
> 

Tested-by: Marek BehĂșn <kabel@kernel.org>