| Message ID | cover.1676933805.git.daniel@makrotopia.org (mailing list archive) |
|---|---|
| Headers | show |
| Series | net: ethernet: mtk_eth_soc: various enhancements | expand |
On Tue, 2023-02-21 at 11:39 +0000, Daniel Golle wrote: > This series brings a variety of fixes and enhancements for mtk_eth_soc, > adds support for the MT7981 SoC and facilitates sharing the SGMII PCS > code between mtk_eth_soc and mt7530. > > Note that this series depends on commit 697c3892d825 > ("regmap: apply reg_base and reg_downshift for single register ops") to > not break mt7530 pcs register access. > > The whole series has been tested on MT7622+MT7531 (BPi-R64), > MT7623+MT7530 (BPi-R2) and MT7981+GPY211 (GL.iNet GL-MT3000). > > Changes since v9: > * fix path in mediatek,sgmiisys dt-binding > > Changes since v8: > * move mediatek,sgmiisys dt-bindings to correct net/pcs folder > * rebase on top of net-next/main so series applies cleanly again > > Changes since v7: > * move mediatek,sgmiisys.yaml to more appropriate folder > * don't include <linux/phylink.h> twice in PCS driver, sort includes > > Changes since v6: > * label MAC MCR bit 12 in 08/12, MediaTek replied explaining its function > > Changes since v5: > * drop dev pointer also from struct mtk_sgmii, pass it as function > parameter instead > * address comments left for dt-bindings > * minor improvements to commit messages > > Changes since v4: > * remove unused dev pointer in struct pcs_mtk_lynxi > * squash link timer check into correct follow-up patch > > Changes since v3: > * remove unused #define's > * use BMCR_* instead of #define'ing our own constants > * return before changing registers in case of invalid link timer > > Changes since v2: > * improve dt-bindings, convert sgmisys bindings to dt-schema yaml > * fix typo > > Changes since v1: > * apply reverse xmas tree everywhere > * improve commit descriptions > * add dt binding documentation > * various small changes addressing all comments received for v1 > > > Daniel Golle (12): > net: ethernet: mtk_eth_soc: add support for MT7981 SoC > dt-bindings: net: mediatek,net: add mt7981-eth binding > dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema > dt-bindings: arm: mediatek: sgmiisys: add MT7981 SoC > net: ethernet: mtk_eth_soc: set MDIO bus clock frequency > net: ethernet: mtk_eth_soc: reset PCS state > net: ethernet: mtk_eth_soc: only write values if needed > net: ethernet: mtk_eth_soc: fix RX data corruption issue > net: ethernet: mtk_eth_soc: ppe: add support for flow accounting > net: pcs: add driver for MediaTek SGMII PCS > net: ethernet: mtk_eth_soc: switch to external PCS driver > net: dsa: mt7530: use external PCS driver > > .../arm/mediatek/mediatek,sgmiisys.txt | 25 -- > .../devicetree/bindings/net/mediatek,net.yaml | 52 ++- > .../bindings/net/pcs/mediatek,sgmiisys.yaml | 55 ++++ > MAINTAINERS | 7 + > drivers/net/dsa/Kconfig | 1 + > drivers/net/dsa/mt7530.c | 277 ++++------------ > drivers/net/dsa/mt7530.h | 47 +-- > drivers/net/ethernet/mediatek/Kconfig | 2 + > drivers/net/ethernet/mediatek/mtk_eth_path.c | 14 +- > drivers/net/ethernet/mediatek/mtk_eth_soc.c | 67 +++- > drivers/net/ethernet/mediatek/mtk_eth_soc.h | 105 +++--- > drivers/net/ethernet/mediatek/mtk_ppe.c | 114 ++++++- > drivers/net/ethernet/mediatek/mtk_ppe.h | 25 +- > .../net/ethernet/mediatek/mtk_ppe_debugfs.c | 9 +- > .../net/ethernet/mediatek/mtk_ppe_offload.c | 8 + > drivers/net/ethernet/mediatek/mtk_ppe_regs.h | 14 + > drivers/net/ethernet/mediatek/mtk_sgmii.c | 192 ++--------- > drivers/net/pcs/Kconfig | 7 + > drivers/net/pcs/Makefile | 1 + > drivers/net/pcs/pcs-mtk-lynxi.c | 302 ++++++++++++++++++ > include/linux/pcs/pcs-mtk-lynxi.h | 13 + > 21 files changed, 801 insertions(+), 536 deletions(-) > delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt > create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml > create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c > create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h > > > base-commit: 3fcdf2dfefb6313ea0395519d1784808c0b6559b # Form letter - net-next is closed The merge window for v6.3 has begun and therefore net-next is closed for new drivers, features, code refactoring and optimizations. We are currently accepting bug fixes only. Please repost when net-next reopens after Mar 6th. RFC patches sent for review only are obviously welcome at any time.
This series brings a variety of fixes and enhancements for mtk_eth_soc, adds support for the MT7981 SoC and facilitates sharing the SGMII PCS code between mtk_eth_soc and mt7530. Note that this series depends on commit 697c3892d825 ("regmap: apply reg_base and reg_downshift for single register ops") to not break mt7530 pcs register access. The whole series has been tested on MT7622+MT7531 (BPi-R64), MT7623+MT7530 (BPi-R2) and MT7981+GPY211 (GL.iNet GL-MT3000). Changes since v9: * fix path in mediatek,sgmiisys dt-binding Changes since v8: * move mediatek,sgmiisys dt-bindings to correct net/pcs folder * rebase on top of net-next/main so series applies cleanly again Changes since v7: * move mediatek,sgmiisys.yaml to more appropriate folder * don't include <linux/phylink.h> twice in PCS driver, sort includes Changes since v6: * label MAC MCR bit 12 in 08/12, MediaTek replied explaining its function Changes since v5: * drop dev pointer also from struct mtk_sgmii, pass it as function parameter instead * address comments left for dt-bindings * minor improvements to commit messages Changes since v4: * remove unused dev pointer in struct pcs_mtk_lynxi * squash link timer check into correct follow-up patch Changes since v3: * remove unused #define's * use BMCR_* instead of #define'ing our own constants * return before changing registers in case of invalid link timer Changes since v2: * improve dt-bindings, convert sgmisys bindings to dt-schema yaml * fix typo Changes since v1: * apply reverse xmas tree everywhere * improve commit descriptions * add dt binding documentation * various small changes addressing all comments received for v1 Daniel Golle (12): net: ethernet: mtk_eth_soc: add support for MT7981 SoC dt-bindings: net: mediatek,net: add mt7981-eth binding dt-bindings: arm: mediatek: sgmiisys: Convert to DT schema dt-bindings: arm: mediatek: sgmiisys: add MT7981 SoC net: ethernet: mtk_eth_soc: set MDIO bus clock frequency net: ethernet: mtk_eth_soc: reset PCS state net: ethernet: mtk_eth_soc: only write values if needed net: ethernet: mtk_eth_soc: fix RX data corruption issue net: ethernet: mtk_eth_soc: ppe: add support for flow accounting net: pcs: add driver for MediaTek SGMII PCS net: ethernet: mtk_eth_soc: switch to external PCS driver net: dsa: mt7530: use external PCS driver .../arm/mediatek/mediatek,sgmiisys.txt | 25 -- .../devicetree/bindings/net/mediatek,net.yaml | 52 ++- .../bindings/net/pcs/mediatek,sgmiisys.yaml | 55 ++++ MAINTAINERS | 7 + drivers/net/dsa/Kconfig | 1 + drivers/net/dsa/mt7530.c | 277 ++++------------ drivers/net/dsa/mt7530.h | 47 +-- drivers/net/ethernet/mediatek/Kconfig | 2 + drivers/net/ethernet/mediatek/mtk_eth_path.c | 14 +- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 67 +++- drivers/net/ethernet/mediatek/mtk_eth_soc.h | 105 +++--- drivers/net/ethernet/mediatek/mtk_ppe.c | 114 ++++++- drivers/net/ethernet/mediatek/mtk_ppe.h | 25 +- .../net/ethernet/mediatek/mtk_ppe_debugfs.c | 9 +- .../net/ethernet/mediatek/mtk_ppe_offload.c | 8 + drivers/net/ethernet/mediatek/mtk_ppe_regs.h | 14 + drivers/net/ethernet/mediatek/mtk_sgmii.c | 192 ++--------- drivers/net/pcs/Kconfig | 7 + drivers/net/pcs/Makefile | 1 + drivers/net/pcs/pcs-mtk-lynxi.c | 302 ++++++++++++++++++ include/linux/pcs/pcs-mtk-lynxi.h | 13 + 21 files changed, 801 insertions(+), 536 deletions(-) delete mode 100644 Documentation/devicetree/bindings/arm/mediatek/mediatek,sgmiisys.txt create mode 100644 Documentation/devicetree/bindings/net/pcs/mediatek,sgmiisys.yaml create mode 100644 drivers/net/pcs/pcs-mtk-lynxi.c create mode 100644 include/linux/pcs/pcs-mtk-lynxi.h base-commit: 3fcdf2dfefb6313ea0395519d1784808c0b6559b