new file mode 100644
@@ -0,0 +1,41 @@
+* MTD SPI nor driver for MTK MT81xx (and similar) serial flash controller
+
+Required properties:
+- compatible: should be "mediatek,mt8173-nor";
+- reg: physical base address and length of the controller's register
+- clocks: the phandle of the clock needed by the nor controller
+- clock-names: the name of the clocks
+ the clocks needed "spi" and "sf". "spi" is used for spi bus,
+ and "sf" is used for controller, these are the clocks witch
+ hardware needs to enabling nor flash and nor flash controller.
+ See Documentation/devicetree/bindings/clock/clock-bindings.txt for details.
+- #address-cells: should be <1>
+- #size-cells: should be <0>
+
+The SPI Flash must be a child of the nor_flash node and must have a
+compatible property.
+
+Required properties:
+- compatible: May include a device-specific string consisting of the manufacturer
+ and name of the chip. Must also include "jedec,spi-nor" for any
+ SPI NOR flash that can be identified by the JEDEC READ ID opcode (0x9F).
+- reg : Chip-Select number
+
+Example:
+
+nor_flash: spi@1100d000 {
+ compatible = "mediatek,mt8173-nor";
+ reg = <0 0x1100d000 0 0xe0>;
+ clocks = <&pericfg CLK_PERI_SPI>,
+ <&topckgen CLK_TOP_SPINFI_IFR_SEL>;
+ clock-names = "spi", "sf";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ };
+};
+
Add device tree binding documentation for serial flash with Mediatek serial flash controller Signed-off-by: Bayi Cheng <bayi.cheng@mediatek.com> --- .../devicetree/bindings/mtd/mtk-quadspi.txt | 41 ++++++++++++++++++++++ 1 file changed, 41 insertions(+) create mode 100644 Documentation/devicetree/bindings/mtd/mtk-quadspi.txt