diff mbox

pinctrl: mediatek: Add get_direction support.

Message ID 1447798633-24586-1-git-send-email-hongzhou.yang@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Hongzhou Yang Nov. 17, 2015, 10:17 p.m. UTC 
Since Linux gpio framework return 0 for output, 1 for input.
But HW use 0 stands for input, and 1 stands for output.
So use negative to correct it.

And gpio_chip.get is used to get input value, no need to get
output value, so removing it.

Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>
---
 Base on v4.4-rc1, resend it.
 Add get direction support.
 Remove gpio_chip.get value for output direction.

 drivers/pinctrl/mediatek/pinctrl-mtk-common.c |   11 ++++-------
 1 file changed, 4 insertions(+), 7 deletions(-)

Comments

Linus Walleij Nov. 18, 2015, 1:54 p.m. UTC | #1 
On Tue, Nov 17, 2015 at 11:17 PM, Hongzhou Yang
<hongzhou.yang@mediatek.com> wrote:

> Since Linux gpio framework return 0 for output, 1 for input.
> But HW use 0 stands for input, and 1 stands for output.
> So use negative to correct it.
>
> And gpio_chip.get is used to get input value, no need to get
> output value, so removing it.
>
> Signed-off-by: Hongzhou Yang <hongzhou.yang@mediatek.com>

Patch applied for fixes.

Yours,
Linus Walleij
diff mbox

Patch

diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
index f307f1d..5c71727 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-common.c
@@ -747,7 +747,7 @@  static int mtk_gpio_get_direction(struct gpio_chip *chip, unsigned offset)
 	reg_addr =  mtk_get_port(pctl, offset) + pctl->devdata->dir_offset;
 	bit = BIT(offset & 0xf);
 	regmap_read(pctl->regmap1, reg_addr, &read_val);
-	return !!(read_val & bit);
+	return !(read_val & bit);
 }
 
 static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
@@ -757,12 +757,8 @@  static int mtk_gpio_get(struct gpio_chip *chip, unsigned offset)
 	unsigned int read_val = 0;
 	struct mtk_pinctrl *pctl = dev_get_drvdata(chip->dev);
 
-	if (mtk_gpio_get_direction(chip, offset))
-		reg_addr = mtk_get_port(pctl, offset) +
-			pctl->devdata->dout_offset;
-	else
-		reg_addr = mtk_get_port(pctl, offset) +
-			pctl->devdata->din_offset;
+	reg_addr = mtk_get_port(pctl, offset) +
+		pctl->devdata->din_offset;
 
 	bit = BIT(offset & 0xf);
 	regmap_read(pctl->regmap1, reg_addr, &read_val);
@@ -997,6 +993,7 @@  static struct gpio_chip mtk_gpio_chip = {
 	.owner			= THIS_MODULE,
 	.request		= gpiochip_generic_request,
 	.free			= gpiochip_generic_free,
+	.get_direction		= mtk_gpio_get_direction,
 	.direction_input	= mtk_gpio_direction_input,
 	.direction_output	= mtk_gpio_direction_output,
 	.get			= mtk_gpio_get,