From patchwork Fri Feb 26 14:21:33 2016 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: John Crispin X-Patchwork-Id: 8437501 Return-Path: X-Original-To: patchwork-linux-mediatek@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork2.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.29.136]) by patchwork2.web.kernel.org (Postfix) with ESMTP id 13546C0554 for ; Fri, 26 Feb 2016 14:22:43 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id E4A8A203B7 for ; Fri, 26 Feb 2016 14:22:41 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.9]) (using TLSv1.2 with cipher AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 564C9203AC for ; Fri, 26 Feb 2016 14:22:40 +0000 (UTC) Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.80.1 #2 (Red Hat Linux)) id 1aZJHz-0006rN-K9; Fri, 26 Feb 2016 14:22:39 +0000 Received: from arrakis.dune.hu ([78.24.191.176]) by bombadil.infradead.org with esmtps (Exim 4.80.1 #2 (Red Hat Linux)) id 1aZJHf-0006Qu-TJ; Fri, 26 Feb 2016 14:22:22 +0000 Received: from arrakis.dune.hu (localhost [127.0.0.1]) by arrakis.dune.hu (Postfix) with ESMTP id 0BBAD283C05; Fri, 26 Feb 2016 15:21:54 +0100 (CET) X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Spam-Level: X-Spam-Status: No, score=-4.2 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_MED, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 Received: from localhost.localdomain (p548C9F76.dip0.t-ipconnect.de [84.140.159.118]) by arrakis.dune.hu (Postfix) with ESMTPSA; Fri, 26 Feb 2016 15:21:54 +0100 (CET) From: John Crispin To: "David S. Miller" Subject: [PATCH V2 01/12] net-next: mediatek: Document ralink/mediatek SoC ethernet binding Date: Fri, 26 Feb 2016 15:21:33 +0100 Message-Id: <1456496504-50429-2-git-send-email-blogic@openwrt.org> X-Mailer: git-send-email 1.7.10.4 In-Reply-To: <1456496504-50429-1-git-send-email-blogic@openwrt.org> References: <1456496504-50429-1-git-send-email-blogic@openwrt.org> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20160226_062220_524571_120BC7FD X-CRM114-Status: GOOD ( 15.77 ) X-Spam-Score: -1.9 (-) X-BeenThere: linux-mediatek@lists.infradead.org X-Mailman-Version: 2.1.20 Precedence: list List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: =?UTF-8?q?Fred=20Chang=20=28=E5=BC=B5=E5=98=89=E5=AE=8F=29?= , devicetree@vger.kernel.org, Felix Fietkau , =?UTF-8?q?Steven=20Liu=20=28=E5=8A=89=E4=BA=BA=E8=B1=AA=29?= , netdev@vger.kernel.org, =?UTF-8?q?Carlos=20Huang=20=28=E9=BB=83=E5=A3=AB=E5=BD=B0=29?= , linux-kernel@vger.kernel.org, linux-mediatek@lists.infradead.org, Matthias Brugger , Michael Lee , linux-arm-kernel@lists.infradead.org, John Crispin MIME-Version: 1.0 Sender: "Linux-mediatek" Errors-To: linux-mediatek-bounces+patchwork-linux-mediatek=patchwork.kernel.org@lists.infradead.org X-Virus-Scanned: ClamAV using ClamSMTP Add three files. One describes the actual frame engine, the other two describe fast ethernet and gigabit switches bindings. Signed-off-by: John Crispin Signed-off-by: Felix Fietkau Signed-off-by: Michael Lee Cc: devicetree@vger.kernel.org --- .../devicetree/bindings/net/mediatek-net-esw.txt | 25 +++++ .../devicetree/bindings/net/mediatek-net-gsw.txt | 48 +++++++++ .../devicetree/bindings/net/mediatek-net.txt | 113 ++++++++++++++++++++ 3 files changed, 186 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/mediatek-net-esw.txt create mode 100644 Documentation/devicetree/bindings/net/mediatek-net-gsw.txt create mode 100644 Documentation/devicetree/bindings/net/mediatek-net.txt diff --git a/Documentation/devicetree/bindings/net/mediatek-net-esw.txt b/Documentation/devicetree/bindings/net/mediatek-net-esw.txt new file mode 100644 index 0000000..84c51a0 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net-esw.txt @@ -0,0 +1,25 @@ +Ralink Fast Ethernet Embedded Switch +==================================== + +The ralink fast ethernet embedded switch can be found on Ralink and Mediatek +SoCs (RT3x5x, RT5350, MT76x8). + +Required properties: +- compatible: Should be "ralink,rt3050-esw" +- reg: Address and length of the register set for the device +- interrupts: Should contain the embedded switches interrupt + +Optional properties: +- mediatek,led_polarity: override the active high/low settings of the leds +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device + +Example: + +esw@10110000 { + compatible = "ralink,rt3050-esw"; + reg = <0x10110000 8000>; + + interrupt-parent = <&intc>; + interrupts = <17>; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt b/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt new file mode 100644 index 0000000..596b385 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net-gsw.txt @@ -0,0 +1,48 @@ +Mediatek Gigabit Switch +======================= + +The mediatek gigabit switch can be found on Mediatek SoCs. + +Required properties: +- compatible: Should be "mediatek,mt7620-gsw", "mediatek,mt7621-gsw", + "mediatek,mt7623-gsw" +- reg: Address and length of the register set for the device +- interrupts: Should contain the gigabit switches interrupt + + +Additional required properties for ARM based SoCs: +- mediatek,reset-pin: phandle describing the reset GPIO +- clocks: the clocks used by the switch +- clock-names: the names of the clocks listed in the clocks property + these should be "trgpll", "esw", "gp2", "gp1" +- mt7530-supply: the phandle of the regulator used to power the switch +- mediatek,pctl-regmap: phandle to the port control regmap. this is used to + setup the drive current + + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device + +Example: + +gsw: switch@1b100000 { + compatible = "mediatek,mt7623-gsw"; + reg = <0 0x1b110000 0 0x300000>; + + interrupt-parent = <&pio>; + interrupts = <168 IRQ_TYPE_EDGE_RISING>; + + clocks = <&apmixedsys CLK_APMIXED_TRGPLL>, + <ðsys CLK_ETHSYS_ESW>, + <ðsys CLK_ETHSYS_GP2>, + <ðsys CLK_ETHSYS_GP1>; + clock-names = "trgpll", "esw", "gp2", "gp1"; + + mt7530-supply = <&mt6323_vpa_reg>; + + mediatek,pctl-regmap = <&syscfg_pctl_a>; + mediatek,reset-pin = <&pio 15 0>; + + status = "okay"; +}; diff --git a/Documentation/devicetree/bindings/net/mediatek-net.txt b/Documentation/devicetree/bindings/net/mediatek-net.txt new file mode 100644 index 0000000..f8c5747 --- /dev/null +++ b/Documentation/devicetree/bindings/net/mediatek-net.txt @@ -0,0 +1,113 @@ +iMEdiatek Frame Engine Ethernet controller +======================================= + +The frame engine ethernet controller can be found on Ralink and Mediatek SoCs +(RT288x, RT3x5x, RT366x, RT388x, rt5350, mt7620, mt7621, mt76x8). + +Depending on the SoC, there is a number of ports connected to the CPU port +directly and/or via a (gigabit-)switch. Newer gigabit SoCs can support +a dual MAC setup. + +* Ethernet controller node + +Required properties: +- compatible: Should be one of "ralink,rt2880-eth", "ralink,rt3050-eth", + "ralink,rt3050-eth", "ralink,rt3883-eth", "ralink,rt5350-eth", + "mediatek,mt7620-eth", "mediatek,mt7621-eth", "mediatek,mt7623-eth" +- reg: Address and length of the register set for the device +- interrupts: Should contain the frame engines interrupt +- mediatek,ethsys: phandle to the syscon node that handles the port setup + +Required properties for ARM based SoCs: +- clocks: the clock used by the core +- clock-names: the names of the clock listed in the clocks property +- power-domains: phandle the to power domain that the ethernet is part of + +Optional properties: +- interrupt-parent: Should be the phandle for the interrupt controller + that services interrupts for this device +- mediatek,switch : phandle pointing at the device node of the switch device + + +* Ethernet port node for MT7620 + +We need to define which physical port is wired and how it should be setup. + +Required properties: +- compatible: Should be "mediatek,eth-port" +- reg: The number of the physical port +- phy-handle: reference to the node describing the phy + + +* Ethernet MAC node - dual MAC SoCs only + +Required properties: +- compatible: Should be "mediatek,eth-mac" +- reg: The number of the MAC + + +Example for singel MAC SoC: + +mdio-bus { + status = "okay"; + + phy4: ethernet-phy@4 { + reg = <4>; + phy-mode = "rgmii"; + }; +}; + +eth: ethernet@10100000 { + compatible = "mediatek,mt7620-eth"; + reg = <0x10100000 10000>; + + #address-cells = <1>; + #size-cells = <0>; + + interrupt-parent = <&cpuintc>; + interrupts = <5>; + + mediatek,switch = <&gsw>; + + port@4 { + status = "okay"; + phy-mode = "rgmii"; + phy-handle = <&phy4>; + }; +}; + + +Example for dual MAC SoC: + +eth: ethernet@1b100000 { + compatible = "mediatek,mt7623-eth"; + reg = <0 0x1b100000 0 0x10000>; + + clocks = <&topckgen CLK_TOP_ETHIF_SEL>; + clock-names = "ethif"; + + interrupts = ; + power-domains = <&scpsys MT2701_POWER_DOMAIN_ETH>; + + mediatek,ethsys = <ðsys>; + mediatek,switch = <&gsw>; + + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + gmac1: mac@0 { + compatible = "mediatek,eth-mac"; + reg = <0>; + + status = "okay"; + }; + + gmac2: mac@1 { + compatible = "mediatek,eth-mac"; + reg = <1>; + + status = "okay"; + }; +};