diff mbox

[4/4] dts: arm64: enable mmc3 for supporting sdio feature

Message ID 1478585341-6749-5-git-send-email-yong.mao@mediatek.com (mailing list archive)
State New, archived
Headers show

Commit Message

Yong Mao Nov. 8, 2016, 6:09 a.m. UTC
From: yong mao <yong.mao@mediatek.com>

Add description of mmc3 for supporting sdio feature

Signed-off-by: Yong Mao <yong.mao@mediatek.com>
Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
---
 arch/arm64/boot/dts/mediatek/mt8173-evb.dts |   82 +++++++++++++++++++++++++++
 1 file changed, 82 insertions(+)

Comments

Yingjoe Chen Nov. 10, 2016, 2:08 a.m. UTC | #1
On Tue, 2016-11-08 at 14:09 +0800, Yong Mao wrote:
> From: yong mao <yong.mao@mediatek.com>
> 
> Add description of mmc3 for supporting sdio feature
> 
> Signed-off-by: Yong Mao <yong.mao@mediatek.com>
> Signed-off-by: Chaotian Jing <chaotian.jing@mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173-evb.dts |   82 +++++++++++++++++++++++++++
>  1 file changed, 82 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> index 2a7f731..4dbd299 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> +++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
> @@ -43,6 +43,14 @@
>  		enable-active-high;
>  	};
>  
> +	sdio_fixed_3v3: fixedregulator@0 {

This should be regulator@1 instead of fixedregulator.

> +		compatible = "regulator-fixed";
> +		regulator-name = "3V3";
> +		regulator-min-microvolt = <3300000>;
> +		regulator-max-microvolt = <3300000>;
> +		gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
> +	};
> +
>  	connector {
>  		compatible = "hdmi-connector";
>  		label = "hdmi";
> @@ -139,6 +147,25 @@
>  	vqmmc-supply = <&mt6397_vmc_reg>;
>  };
>  
> +&mmc3 {
> +	status = "okay";
> +	pinctrl-names = "default", "state_uhs";
> +	pinctrl-0 = <&mmc3_pins_default>;
> +	pinctrl-1 = <&mmc3_pins_uhs>;
> +	bus-width = <4>;
> +	max-frequency = <200000000>;
> +	cap-sd-highspeed;
> +	sd-uhs-sdr50;
> +	sd-uhs-sdr104;
> +	sdr104-clk-delay = <5>;
> +	keep-power-in-suspend;
> +	enable-sdio-wakeup;
> +	cap-sdio-irq;
> +	vmmc-supply = <&sdio_fixed_3v3>;
> +	vqmmc-supply = <&mt6397_vgp3_reg>;
> +	non-removable;
> +};
> +
>  &pio {
>  	disp_pwm0_pins: disp_pwm0_pins {
>  		pins1 {
> @@ -197,6 +224,36 @@
>  		};
>  	};
>  
> +	mmc3_pins_default: mmc3default {

Please keep nodes in &pio sorted, move this one after mmc1_pins_uhs.

> +		pins_dat {
> +			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
> +				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
> +				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
> +				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
> +			input-enable;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +
> +		pins_cmd {
> +			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
> +			input-enable;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +
> +		pins_clk {
> +			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
> +			bias-pull-down;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +		};
> +
> +		pins_pdn {
> +			pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
> +			output-low;
> +		};

This one is used in regulator, not really an mmc pin.
Also, you don't need to add node for gpio usage, request_gpio will set
mode for you.
So please remove pins_pdn node.


> +	};
> +
>  	mmc0_pins_uhs: mmc0 {
>  		pins_cmd_dat {
>  			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> @@ -243,6 +300,31 @@
>  			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
>  		};
>  	};
> +
> +	mmc3_pins_uhs: mmc3 {


Please keep nodes in &pio sorted, move this one after mmc1_pins_uhs.


Joe.C

> +		pins_dat {
> +			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
> +				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
> +				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
> +				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
> +			input-enable;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +
> +		pins_cmd {
> +			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
> +			input-enable;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +
> +		pins_clk {
> +			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
> +			drive-strength = <MTK_DRIVE_8mA>;
> +			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> +		};
> +	};
>  };
>  
>  &pwm0 {
diff mbox

Patch

diff --git a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
index 2a7f731..4dbd299 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8173-evb.dts
@@ -43,6 +43,14 @@ 
 		enable-active-high;
 	};
 
+	sdio_fixed_3v3: fixedregulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&pio 85 GPIO_ACTIVE_HIGH>;
+	};
+
 	connector {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -139,6 +147,25 @@ 
 	vqmmc-supply = <&mt6397_vmc_reg>;
 };
 
+&mmc3 {
+	status = "okay";
+	pinctrl-names = "default", "state_uhs";
+	pinctrl-0 = <&mmc3_pins_default>;
+	pinctrl-1 = <&mmc3_pins_uhs>;
+	bus-width = <4>;
+	max-frequency = <200000000>;
+	cap-sd-highspeed;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	sdr104-clk-delay = <5>;
+	keep-power-in-suspend;
+	enable-sdio-wakeup;
+	cap-sdio-irq;
+	vmmc-supply = <&sdio_fixed_3v3>;
+	vqmmc-supply = <&mt6397_vgp3_reg>;
+	non-removable;
+};
+
 &pio {
 	disp_pwm0_pins: disp_pwm0_pins {
 		pins1 {
@@ -197,6 +224,36 @@ 
 		};
 	};
 
+	mmc3_pins_default: mmc3default {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			bias-pull-down;
+			drive-strength = <MTK_DRIVE_8mA>;
+		};
+
+		pins_pdn {
+			pinmux = <MT8173_PIN_85_AUD_DAT_MOSI__FUNC_GPIO85>;
+			output-low;
+		};
+	};
+
 	mmc0_pins_uhs: mmc0 {
 		pins_cmd_dat {
 			pinmux = <MT8173_PIN_57_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
@@ -243,6 +300,31 @@ 
 			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
 		};
 	};
+
+	mmc3_pins_uhs: mmc3 {
+		pins_dat {
+			pinmux = <MT8173_PIN_22_MSDC3_DAT0__FUNC_MSDC3_DAT0>,
+				 <MT8173_PIN_23_MSDC3_DAT1__FUNC_MSDC3_DAT1>,
+				 <MT8173_PIN_24_MSDC3_DAT2__FUNC_MSDC3_DAT2>,
+				 <MT8173_PIN_25_MSDC3_DAT3__FUNC_MSDC3_DAT3>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_cmd {
+			pinmux = <MT8173_PIN_27_MSDC3_CMD__FUNC_MSDC3_CMD>;
+			input-enable;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
+		};
+
+		pins_clk {
+			pinmux = <MT8173_PIN_26_MSDC3_CLK__FUNC_MSDC3_CLK>;
+			drive-strength = <MTK_DRIVE_8mA>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
 };
 
 &pwm0 {