| Message ID | 1485170975-51813-9-git-send-email-john@phrozen.org (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
On 01/23/2017 12:29 PM, John Crispin wrote: > Add SPI nodes to the mt7623.dtsi file. > > Signed-off-by: John Crispin <john@phrozen.org> > --- > arch/arm/boot/dts/mt7623.dtsi | 12 ++++++++++++ > 1 file changed, 12 insertions(+) > > diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi > index 8ac4569..c8f38e1 100644 > --- a/arch/arm/boot/dts/mt7623.dtsi > +++ b/arch/arm/boot/dts/mt7623.dtsi > @@ -15,6 +15,7 @@ > #include <dt-bindings/interrupt-controller/irq.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/clock/mt2701-clk.h> > +#include <dt-bindings/phy/phy.h> Why do you need this include here? Regards, Matthias > #include <dt-bindings/pinctrl/mt7623-pinfunc.h> > #include <dt-bindings/power/mt2701-power.h> > #include <dt-bindings/reset/mt2701-resets.h> > @@ -281,6 +282,17 @@ > status = "disabled"; > }; > > + spi: spi@1100a000 { > + compatible = "mediatek,mt7623-spi", > + "mediatek,mt6589-spi"; > + reg = <0 0x1100a000 0 0x1000>; > + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; > + clocks = <&pericfg CLK_PERI_SPI0>; > + clock-names = "main"; > + > + status = "disabled"; > + }; > + > hifsys: syscon@1a000000 { > compatible = "mediatek,mt7623-hifsys", > "mediatek,mt2701-hifsys", >
On 24/01/2017 23:39, Matthias Brugger wrote: > > > On 01/23/2017 12:29 PM, John Crispin wrote: >> Add SPI nodes to the mt7623.dtsi file. >> >> Signed-off-by: John Crispin <john@phrozen.org> >> --- >> arch/arm/boot/dts/mt7623.dtsi | 12 ++++++++++++ >> 1 file changed, 12 insertions(+) >> >> diff --git a/arch/arm/boot/dts/mt7623.dtsi >> b/arch/arm/boot/dts/mt7623.dtsi >> index 8ac4569..c8f38e1 100644 >> --- a/arch/arm/boot/dts/mt7623.dtsi >> +++ b/arch/arm/boot/dts/mt7623.dtsi >> @@ -15,6 +15,7 @@ >> #include <dt-bindings/interrupt-controller/irq.h> >> #include <dt-bindings/interrupt-controller/arm-gic.h> >> #include <dt-bindings/clock/mt2701-clk.h> >> +#include <dt-bindings/phy/phy.h> > > Why do you need this include here? > > Regards, > Matthias > should be part of the ubs patch. V2 coming up in a tad John >> #include <dt-bindings/pinctrl/mt7623-pinfunc.h> >> #include <dt-bindings/power/mt2701-power.h> >> #include <dt-bindings/reset/mt2701-resets.h> >> @@ -281,6 +282,17 @@ >> status = "disabled"; >> }; >> >> + spi: spi@1100a000 { >> + compatible = "mediatek,mt7623-spi", >> + "mediatek,mt6589-spi"; >> + reg = <0 0x1100a000 0 0x1000>; >> + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; >> + clocks = <&pericfg CLK_PERI_SPI0>; >> + clock-names = "main"; >> + >> + status = "disabled"; >> + }; >> + >> hifsys: syscon@1a000000 { >> compatible = "mediatek,mt7623-hifsys", >> "mediatek,mt2701-hifsys", >> > > _______________________________________________ > Linux-mediatek mailing list > Linux-mediatek@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-mediatek
diff --git a/arch/arm/boot/dts/mt7623.dtsi b/arch/arm/boot/dts/mt7623.dtsi index 8ac4569..c8f38e1 100644 --- a/arch/arm/boot/dts/mt7623.dtsi +++ b/arch/arm/boot/dts/mt7623.dtsi @@ -15,6 +15,7 @@ #include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/clock/mt2701-clk.h> +#include <dt-bindings/phy/phy.h> #include <dt-bindings/pinctrl/mt7623-pinfunc.h> #include <dt-bindings/power/mt2701-power.h> #include <dt-bindings/reset/mt2701-resets.h> @@ -281,6 +282,17 @@ status = "disabled"; }; + spi: spi@1100a000 { + compatible = "mediatek,mt7623-spi", + "mediatek,mt6589-spi"; + reg = <0 0x1100a000 0 0x1000>; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_LOW>; + clocks = <&pericfg CLK_PERI_SPI0>; + clock-names = "main"; + + status = "disabled"; + }; + hifsys: syscon@1a000000 { compatible = "mediatek,mt7623-hifsys", "mediatek,mt2701-hifsys",
Add SPI nodes to the mt7623.dtsi file. Signed-off-by: John Crispin <john@phrozen.org> --- arch/arm/boot/dts/mt7623.dtsi | 12 ++++++++++++ 1 file changed, 12 insertions(+)